i9505 4.2.2 unlock done...[Reference]
share ko lang mga boss i9505 unlock done
procedure
1. For Unlock and IMEI Repair
2.Write Firmware gamit yang na download mo kailangan naka donwload mode sya
(volume down,home,power ON)
logs
Selected firmware file: For_Unlock_and_IMEI_Repair_GT-I9505.oct
Please switch your phone to the download mode and connect it to a PC.
To put GT-I9505 phone into download mode you have to perform the following steps:
1. Reconnect phone battery.
2. Press and hold "Volume - " + "Home" + "Power" buttons.
3. When phone turns on press "Volume+" button.
Found phone on
Firmware write started.
Writing MDM section...
MDM section has been written successfully.
Firmware writing successfully completed.
3. Redy for unlocking na read code ginawa ko
To connect GT-I9505 phone you have to perform the following steps:
1. Disconnect USB cable from phone.
2. Go to Menu->Settings->More->About Device.
3.Tap on "Builds numbers" 7 times to enable developer options.
4. Go to Menu->Settings->More->Developer options.
5. Turn on "USB Debugging" option.
6. Go to dial window.
7. Enter "*#0808#" number.
8. Select "DM+Modem+ADB".
9. Close window.
10. Go to dial window.
11. Enter "*#9090#" number.
12. Set "Diag config" to "USB" value.
13. Restart phone.
14. Press "Read Info" in software.
SALAMAT SA PAG BASA
share ko lang mga boss i9505 unlock done
procedure
1. For Unlock and IMEI Repair
2.Write Firmware gamit yang na download mo kailangan naka donwload mode sya
(volume down,home,power ON)
logs
Selected firmware file: For_Unlock_and_IMEI_Repair_GT-I9505.oct
Please switch your phone to the download mode and connect it to a PC.
To put GT-I9505 phone into download mode you have to perform the following steps:
1. Reconnect phone battery.
2. Press and hold "Volume - " + "Home" + "Power" buttons.
3. When phone turns on press "Volume+" button.
Found phone on
Firmware write started.
Writing MDM section...
MDM section has been written successfully.
Firmware writing successfully completed.
3. Redy for unlocking na read code ginawa ko
To connect GT-I9505 phone you have to perform the following steps:
1. Disconnect USB cable from phone.
2. Go to Menu->Settings->More->About Device.
3.Tap on "Builds numbers" 7 times to enable developer options.
4. Go to Menu->Settings->More->Developer options.
5. Turn on "USB Debugging" option.
6. Go to dial window.
7. Enter "*#0808#" number.
8. Select "DM+Modem+ADB".
9. Close window.
10. Go to dial window.
11. Enter "*#9090#" number.
12. Set "Diag config" to "USB" value.
13. Restart phone.
14. Press "Read Info" in software.
SALAMAT SA PAG BASA