- Joined
- Jul 27, 2014
- Messages
- 104
hit thanks if my thread was usefull ^_^
brand:skytex
board id: inet 86VZ REV03 zeng gc 2013 07 08
problem: logo problem
solution: flashing
applcaition use: PhoenixCard_V3.0.9_20121211
tools: micro sd where your going to boot the flashfile and a memmory card reader
sorry for my english and spelling hahaha
ito poh ang picture ng board id
procedure done using PhoenixCard
1. choose the drive where to install the flashfile
2. choose the firmware
3. format to normal before you install
4. then burn and wait for it to finish
5. remove the memory card and insert to the table. (the tablet must be turn off before you insert the memory card)
6 . one the loading file is finish remove the card imiditely(the loadng bar will disapear that the time to remove it. dont wait for it to reboot before your remove or it will reistall again.)
image of the tablet while installing the firmware(one finish the loading bar will disappear and "card okey" will blink on the screen)
remove the memory card ones done..
turn on the tablet again after removing the memory card(sometimes automatic turns on thats why you need to be quick in removing the memory card)
front camera working good
back camera working good
Hit thanks before your download
firmware: https://www.4shared.com/s/fY7ypcpXMca
tools:https://www.4shared.com/s/f2U3jVQoIca
password:Jorvs
Hit thanks if my thread was useful ^_^
brand:skytex
board id: inet 86VZ REV03 zeng gc 2013 07 08
problem: logo problem
solution: flashing
applcaition use: PhoenixCard_V3.0.9_20121211
tools: micro sd where your going to boot the flashfile and a memmory card reader
sorry for my english and spelling hahaha
ito poh ang picture ng board id
procedure done using PhoenixCard
1. choose the drive where to install the flashfile
2. choose the firmware
3. format to normal before you install
4. then burn and wait for it to finish
5. remove the memory card and insert to the table. (the tablet must be turn off before you insert the memory card)
6 . one the loading file is finish remove the card imiditely(the loadng bar will disapear that the time to remove it. dont wait for it to reboot before your remove or it will reistall again.)
image of the tablet while installing the firmware(one finish the loading bar will disappear and "card okey" will blink on the screen)
remove the memory card ones done..
turn on the tablet again after removing the memory card(sometimes automatic turns on thats why you need to be quick in removing the memory card)
front camera working good
back camera working good
Hit thanks before your download
firmware: https://www.4shared.com/s/fY7ypcpXMca
tools:https://www.4shared.com/s/f2U3jVQoIca
password:Jorvs
Hit thanks if my thread was useful ^_^
Last edited by a moderator:
