News & Updates Infinity Chinese Miracle-2 CM2MT2 strickly news and update only here

[Gsm khan]

Infinity Chinese Miracle-2 CM2MT2 v2.33 - New repair and service features



Infinity Chinese Miracle-2 CM2MT2 v2.33 - New repair and service features

As ordinary unique #CM2 functions and methods released

Core
Changed: Protocol updated (RAPHAEL/LEGACY)
Changed: FireFly OverDA has been updated

MemoryTool
Changed: MemoryTool rebuild
Changed: Activated "Restore Backup" with security only mode
Changed: Activated "Open active folder" button
Changed: Activated Init GPT from binary file
Changed: RPMB operations optimized
Changed: RPMB unificated type detection ( "swapable" types even on programmed RPMB )

Flasher
Changed: Protocol updated (RAPHAEL)
Changed: UltraFlash protocol updated
Changed: Renamed "Check HW" to "Check Compatibility"
- Now software check also compatibility between selected firmware and phone firmware sides
- You will see a warning about any issues with incompatible combinations, which may lead to device/security damage
- in case of enforced flashing can be used "Restore Backup" to recover security data (with enabled Security Only" option)
Changed: Backup option during flashing enforced by default

Service
Changed: "Smart Reset" rebuild
Changed: "Smart Reset Extra" rebuild
- Smart Reset Extra updated: Improved Huawei Account reset ( "old types" and "modern types" supported )
- Smart Reset Extra updated: Improved Samsung support : Reset/Change KG
Required mode can be changed in software Settings tab!
- Factory Reset : FRP reset only option updated, now brand-indepedent ( If need reset FRP only, without Smart-ones )
- Factory Reset : FullFactory[1] and Factory[2] methods issues can be reset by other methods ( "No recovery command" issue )
- Factory Reset : Optimized latest firmwares-devices settings detection
Changed: Identify operation improved
Changed: Restore Backup option improved : ability to restore "security" only items instead of full range (by enabling "Security Only" checkbox)

Other
Changed: GUI changes : MemoryTool menu, Dialogs, GUI fixes on older OS types
Changed: Many importnatn internal changes, bugfixes and improvements
Changed: RPMB with "type3" supported - unique feature, see the power


Download link #1

Download link #2

Download link #3


Telegram Channel

Telegram Group Chat English

Telegram Группа на Русском 1

Telegram Группа на Русском 2

Firmware File Finder via Telegram

 

[Gsm khan]

Infinity Chinese Miracle-2 CM2MT2 v2.34 - OP and RMX extra stuff [part 1/2]

Manual with nice pictures is HERE

As ordinary unique #CM2 functions and methods released

Core
Changed: Protocol updated RAPHAEL/LEGACY

MemoryTool
Changed: Init GPT operations optimized
Changed: RPMB operations optimized

Flasher
Changed: Protocol updated (RAPHAEL)
Changed: UltraFlash protocol updated
Changed: OFP direct support activated ( oppo and realme )
- Support normal and unmerged firmwares
- Support region selection for unmerged firmwares
- Make normal scatter as result FW

Service
Changed: "Smart Reset" optimized
- Fixed issues with some A/B devices - Nokia, Tecno and similar models may be affected
Changed: "Smart Reset Extra" option optimized
- Fixed issues with some A/B devices - Nokia, Tecno and similar models may be affected
- Smart Reset Extra updated: Improved Samsung support for Reset/Change KG
Changed: Identify operation improved
Changed: FixDL operation now support also fix Oppo and Realme devices "black screen" with DL error
- Fix "download not completed" error
- Fix device production and operation state in case of flash erase or other fails
- Fix device ocdt params in case of erase or after factory cdt download
- Just run FixDL and software will make all automatic
- In some case (f.e. device with multi-config and "new" type) operation may require device reflash with correct files

Firmware Reader
Changed: Core optimized
Changed: Android 12 initial support
Changed: Internal DB update

Forensic
Changed: "Smart Reset Data Safe" operation optimized
- OPPO : Engine has been rebuild to "safe" mode (no factory reset in case of unsupported version/config)
- OPPO : Confirmed and working with "original" manufactured models - A15, A5s and similar devices
- OPPO : Not work with OEM-made models - A1k and similar devices

Other
Changed: FireFly : Sparse flashing optimized, modern images are supported now
Changed: Samsung KG : Separate change state button activated, kg operations optimized
Changed: Many importnatn internal changes, bugfixes and improvements


Download link #1

Download link #2

Download link #3


Infinity Telegram Group
Infinity Telegram Group Chat English
Infinity Telegram Group Chat на Русском #1
Infinity Telegram Group Chat на Русском #2
Infinity Telegram Flash File search
Infinity Video Manuals
Infinity Facebook Page
Infinity Facebook Group
Infinity Twitter

 

[Gsm khan]

Infinity Chinese Miracle-2 #CM2MT2 v2.37 - general improvements and fixes

- "Restore Backup" config mode updated
- "Restore Backup" allow to select files manually
- Flash file (Scatter) Open|Select|Clean buttons at "Flash" page
- Flash file (Scatter) parser updated
- Flash file (Scatter) selection issue fixes
- MemoryTool file selection issue fixes
- MemoryTool gui minor changes
- "Switch to HS USB" option removed
- Config storage engine updated
- Account Check gives balance and subscription date
- "PMT Info" config value stored
- "Flash" page minor gui changes
- Loaders remote verification revised
- Installer updated to manage previously installed boot-pack
- Required Dongle firmware version: 0153


Download link #1
Download link #2
Download link #3

 

[Gsmkhan]

Infinity Chinese Miracle-2 #CM2MT2 v2.38 released


Infinity Chinese Miracle-2 CM2MT2 v2.38 - general improvements and fixes

!!! WARNING !!!
Backup files storage structure changed, files and folders will be compressed. Here is backup files structure
Software will convert files and folders at first run!
If you have important data - make /backup/ folder copy for emergency case!
Process may takes time, BE PATIENT!

- Startup process revised
- Backup files are packed, zip and 7z formats are supported (7z.dll is required)
- Backup files default format is 7z
- Backup|Restore partitions list updated
- Backup overwrite request for "Identify" only, skip existing backup replacement for other operations
- Partition size verification during backup
- File content verification (zeroes) during backup creation
- File content verification (zeroes) during backup restore
- Display hw|sw info to log during backup file selection
- Restore backup images with .bin and .img extensions
- Legacy settings values removed
- MemTool work path save|restore
- MemTool window position save|restore
- MemTool ui changes
- Log window style customization
- HW Report behaviour changed depends on selected Platform
- Cloud: display hw|sw info about last connected device
- Cloud: get previously stored backup file
- Flash chip vendors list updated
- ufs parser revised
- emmc parser revised
- emmc failure detection improved
- nand parser revised
- Firmware read/write last selected path save|restore
- scatter file creation process rebuilded
- scatter file load process revised
- META mode connection method revised
- META mode info and device version output revised
- META mode memory leak fixed
- Check free disk space on startup
- Check free disk space on Flash Read
- Flash Read file selection method updated
- Flash Read process termination revised
- Backup before Reset in META mode
- Backup before Reset in Flash mode
- extcsd backup file content verification
- PMT (partition table) info output slightly changed
- PMT (partition table) info included to device.txt during backup
- Store device.txt with hardware and software info to backup
- Store device.txt with hardware and software info to firmware
- Store device.txt file as ini
- Store loaders config to device.txt file
- Verify backup presence before process
- Error messages and software hints updated
- More software hints for [Format] operations
- More messages in log about process flow
- [SMART RESET EXTRA] error handling revised to recover after error
- Create Screenshot [Snap] as .png instead of .bmp (quite compact)
- Device brand|model detection revised
- Updates checker rebuilded
- External update checker disabled
- External firmware uploader enabled
- [Stop] process revised
- Customs Settings -> EMI button extract prevoader from partition image on load
- MemTool selection mode for 128 Mb and 256 Mb in list
- MemTool file selection revised
- MemTool operations revised
- [Flash] page minor ui changes
- [Security] page minor ui changes
- [NVRAM Read] operation revised
- [NVRAM Write] operation revised
- NVRAM backup file format changed
- [Restore Backup] operation allow to select backup file
- [Restore Backup] has new restore mode [+preloader]
- Check free disk space before backup
- settings.ini new value [where] backup=backup\
- settings.ini new value [where] boot=boot\
- settings.ini new value [where] tools=..\tools\
- settings.ini new value [where] firmware=firmware\
- SC engine revised
- Files verification config option in [Settings] page
- Files verification for nvram backup enabled
- Memory management engine revised
- [KG] moved to [Misc] section
- Dialogs texts revised. Message text will be visible in log window on selection
- Minor log text messages and ui changes
- Check required dll's on startup
- ssleay32.dll included to installer to improve compatibility
- 7z.dll included to installer
- /tools/iosFileUploader included to installer
- Required Dongle firmware version: 0153


Infinity Telegram Channel
Infinity Telegram Chat English
Infinity Telegram Chat Русский, Українська, Белару́ская #1
Infinity Telegram Chat Русский, Українська, Белару́ская #2
Infinity Telegram Flash File search
Infinity Video Manuals
Infinity Facebook Page
Infinity Facebook Group
Infinity Twitter


Download link #1
Download link #2
Download link #3

 

[Gsmkhan]

Infinity Chinese Miracle-2 #CM2MT2 v2.41


Infinity Chinese Miracle-2 #CM2MT2 v2.41

General:
- FireFly core loader updated: /XFireFly/base/FireFly_AllInOne_DA.bin
- FireFly mode operations updated such as bootloader unlock etc.
- Many internal changes

Image management:
- Preloader parser/converter updated
- Preloader/EMI open dialog updated for bin/img files
- DA, Cert, Auth, Preloader load/verification method updated

User Interface:
- log management engine updated
- software messages revised

Dongle firmware version required: 0154


Download link #1
Download link #2
Download link #3



Infinity Telegram Channel
Infinity Telegram Chat English
Infinity Telegram Chat Русский, Українська, Белару́ская #1
Infinity Telegram Chat Русский, Українська, Белару́ская #2
Infinity Telegram Flash File search
Infinity Video Manuals
Infinity Facebook Page
Infinity Facebook Group
Infinity Twitter

 

[Gsmkhan]

Infinity #CM2MT2 v2.44 Infinix/Tecno no need Test Point and more features


Infinity #CM2MT2 v2.44 Infinix/Tecno no need TP and more features

General:
- Device info detection revised
- EMI processing for legacy hardware (f.e. MT6580) revised
- EMI database rebuilded
- Meizu operations revised
- New feature: Brom ON/OFF - allow enable BROM mode and allow do extended services such as:
All FireFly Features: Boot unlock, testing, service etc.
All FireFly DA features: Boot unlock, RPMB, service and other
NOTE: Read BROM On|Off manual
- Display partition/image size during flash Read/Write
- Device information parser updated
- DA selection mode revised
- DA information/hints displayed on selection for number of loaders
- DA config database updated
- Red|Orange state methods revised
- Incompatible image confirmation during Flash fixed
- Simlock methods output updated
- Format methods output updated
- Infinix and Tecno without testpoint/disassembly included MT6739, MT6761, MT6763, MT6765, MT6768, MT6781, MT6785, MT6833, MT6877, MT6893
- Internal changes - memory management and more

MemoryTool:
- Bulk Read/Write operations updated: selection and Read/Write path sync
- Read/Write file path handling method on file select/cancel revised
- Messages & errors|hints updated

Backup:
- Backup restore process updated with any record On|Off selection
- Select All/None items by right mouse click

User Interface:
- Startup window position config revised
- Software messages & hints updated

Dongle firmware version required: 0155


Download link #1
Download link #2
Download link #3



Infinity Telegram Channel
Infinity Telegram Chat English
Infinity Telegram Chat Русский, Українська, Белару́ская #1
Infinity Telegram Chat Русский, Українська, Белару́ская #2
Infinity Telegram Flash File search
Infinity Video Manuals
Infinity Facebook Page
Infinity Facebook Group
Infinity Twitter

 

[Gsm khan]

Infinity #CM2MT2 v2.45

- startup process and external dll's handling method revised to avoid 0x0c000007b issue with damaged libusb installation
- boot process revised
- boot/sla error handling method changed
- flash read process revised: luci handling updated and more detailed output
- EMI database structure updated
- MemoryTool file path handling updated, non-existent path check
- external dll's moved to /lib/
- external dll's verification method updated
- separate fscard.ini file is not required any more
- strategy detector updated: honor
- "Restore backup" process revised, issue with filelist fixed
- flash writer display source file size instead of partition size
- flash reader: [Create SCAT] option
- gui resize bug fixed
- auto-update check method changed to once per day
- messages and hints updated
- minor ui changes
- many internal changes and improvements

NOTE: install latest CM2MT2 boot-pack for best results


DOWNLOAD

 

[Gsm khan]

Infinity #CM2MT2 v2.46

LUCI Devices:
- MT6983 support fixed
- UltraFlash protocol updated

Firmware Reader:
- Automatic detection activated
- Software now allow correctly read most modern devices even if they are not tested
- Avoid possible problems with OTA, damaging vendor-unique stuff or any other identification data

Firmware Analyzer:
- Strategy detection revised
- Firmware version detection methods updated

Bootloader unlock:
- Oppo/Realme specific changes

Factory Reset:
- Complete rebuild to automatic / vendor strategy depend mode

Boot methods:
- boot/DA database management revised

SCAT loader:
- Display firmware info on file load
- Display firmware info on flash write start
- Verify loaded image via server

Other changes:
- messages and hints updated
- minor ui changes
- many internal changes and improvements


Download link #1
Download link #2
Download link #3


Infinity Telegram Channel
Infinity Telegram Chat English
Infinity Telegram Chat Русский, Українська, Белару́ская #1
Infinity Telegram Chat Русский, Українська, Белару́ская #2
Infinity Telegram Flash File search
Infinity Video Manuals
Infinity Facebook Page
Infinity Facebook Group
Infinity Twitter