johnpaul11
Registered
- Joined
- May 12, 2018
- Messages
- 17
- Reaction score
- 4
- Points
- 1
EZP2010 Programmer will be updated from 2010 to 2011.
English:
1.Connect the EZP Programmer
2.Enable Test Mode in Windows 10
Type in Search cmd and run as Administrator.
Type bcdedit /set testsigning on ,press Enter and restart the PC.
3.The Device Manager is showing a Unknown device,select the folder and install the driver for Windows 10(8,8.1 not tested)
Update driver, Browse my computer for driver software, Browse ... find the folder with the driver for Windows 10(8,8.1 not tested)
4.Ignore the warning and install the driver
5.Copy the folder with the software and firmware to C:
6.Make a shortcut for EZP2011 Portable (Send to Desktop)
7.Open the program and go to update firmware and upgrade to firmware 3.0
8.In Search type cmd and run as Administrator
9.Type bcdedit /set testsigning off ,press Enter and restart the PC.Done.
YT Link
DL LINK
English:
1.Connect the EZP Programmer
2.Enable Test Mode in Windows 10
Type in Search cmd and run as Administrator.
Type bcdedit /set testsigning on ,press Enter and restart the PC.
3.The Device Manager is showing a Unknown device,select the folder and install the driver for Windows 10(8,8.1 not tested)
Update driver, Browse my computer for driver software, Browse ... find the folder with the driver for Windows 10(8,8.1 not tested)
4.Ignore the warning and install the driver
5.Copy the folder with the software and firmware to C:
6.Make a shortcut for EZP2011 Portable (Send to Desktop)
7.Open the program and go to update firmware and upgrade to firmware 3.0
8.In Search type cmd and run as Administrator
9.Type bcdedit /set testsigning off ,press Enter and restart the PC.Done.
YT Link
DL LINK