Iphone 4s Clone problema lockcode try ko tanggalin ke milagro crack
ngunit sawing palad namatay ang unit
kaya subukan na si cm2 ayun sapul
1. Remove battery. Insert USB cablengunit sawing palad namatay ang unit
kaya subukan na si cm2 ayun sapul
2. Press and hold BootKey (home)
3. resold battery (diskartehan nalang po resold ang batt. habang naka pindot sa home key)
pagkatapos nyang mabuhay uli may code parin kaya proceed sa format
pindot home saksak usb (dina need tanggal batt)
<aside>
======= Flash
Files set for flashing :
[ MCU ] : 6530A_MX25U12835E.bin
1. Remove battery. Insert USB cable
2. Press and hold BootKey ( Skip, if use BootCable )
3. Insert battery
==== Wait for phone...
Phone found! [ 6 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending boot ...
Boot Sent , starting...
Boot Ver : Spreadtrum Boot Block version 1.2
Boot Ok
CPU ID : 6530 , FDLStat : 0000
[0] Flash DIE : 00C2 0025 0038 0000
[0] Flash VEN : Macronix , MX25
[0] Flash CAP : 01000000
======= Flashing MCU
Mapping file ...
Mapping done
Processing file : 6530A_MX25U12835E.bin
Init ok, send data
Flashing Done!
Info : In some cases after flash required make "Format Fs / Reset Phone"
Done!
Elapsed: 00:07:10
Reconnect Power/Cable!
Operation : Read User Code [ v1.15 ]
1. Remove battery. Insert USB cable
2. Press and hold BootKey ( Skip, if use BootCable )
3. Insert battery
==== Wait for phone...
Device boot not done
Check Drivers
Try again
Reconnect Power/Cable!
Operation : Format File System / Reset Settings [ v1.15 ]
Settings : SmartFormat is On
1. Remove battery. Insert USB cable
2. Press and hold BootKey ( Skip, if use BootCable )
3. Insert battery
==== Wait for phone...
Phone found! [ 6 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending boot ...
Boot Sent , starting...
Boot Ver : Spreadtrum Boot Block version 1.2
Boot Ok
CPU ID : 6530 , FDLStat : 0000
[0] Flash DIE : 00C2 0025 0038 0000
[0] Flash VEN : Macronix , MX25
[0] Flash CAP : 01000000
Verify data... Can take some time
Init Ok, formatting DIN area ...
Format Block Done!
Done!
Elapsed: 00:00:26
Reconnect Power/Cable!
Click to expand...
</aside> Files set for flashing :
[ MCU ] : 6530A_MX25U12835E.bin
1. Remove battery. Insert USB cable
2. Press and hold BootKey ( Skip, if use BootCable )
3. Insert battery
==== Wait for phone...
Phone found! [ 6 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending boot ...
Boot Sent , starting...
Boot Ver : Spreadtrum Boot Block version 1.2
Boot Ok
CPU ID : 6530 , FDLStat : 0000
[0] Flash DIE : 00C2 0025 0038 0000
[0] Flash VEN : Macronix , MX25
[0] Flash CAP : 01000000
======= Flashing MCU
Mapping file ...
Mapping done
Processing file : 6530A_MX25U12835E.bin
Init ok, send data
Flashing Done!
Info : In some cases after flash required make "Format Fs / Reset Phone"
Done!
Elapsed: 00:07:10
Reconnect Power/Cable!
Operation : Read User Code [ v1.15 ]
1. Remove battery. Insert USB cable
2. Press and hold BootKey ( Skip, if use BootCable )
3. Insert battery
==== Wait for phone...
Device boot not done
Check Drivers
Try again
Reconnect Power/Cable!
Operation : Format File System / Reset Settings [ v1.15 ]
Settings : SmartFormat is On
1. Remove battery. Insert USB cable
2. Press and hold BootKey ( Skip, if use BootCable )
3. Insert battery
==== Wait for phone...
Phone found! [ 6 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending boot ...
Boot Sent , starting...
Boot Ver : Spreadtrum Boot Block version 1.2
Boot Ok
CPU ID : 6530 , FDLStat : 0000
[0] Flash DIE : 00C2 0025 0038 0000
[0] Flash VEN : Macronix , MX25
[0] Flash CAP : 01000000
Verify data... Can take some time
Init Ok, formatting DIN area ...
Format Block Done!
Done!
Elapsed: 00:00:26
Reconnect Power/Cable!
Click to expand...
DONE
ere ho pala ginamit ko galing ke milagro crack
6530A_MX25U12835E
Last edited by a moderator: