DOWNLOAD iphone4s china(tested solution for screen lock) [ Reference ]

[AltF4]

HISTORY::screen lock

TOOL'S NEEDED::volcano box,jig p-30a,2wires for the connector of battery terminal

PROCEDURE'S::

here is the tested solution for the clone iphone china that everytime you read flash and give the passwords but doesnt accept the screen lock password WHEN YOU TRY TO ENTER THE CODE........
1.)open VOLCANO TOOL V.4.3
2.)connect the jig to the charger pin connecter and solder the 2wires to the battery terminal.
3.)choose SPD
4.)thick BUILT IN BOOT 13(6530)
5.)for SAFETY you must backup first.thick READ FLASH and click RUN but you must press the HOME button for the bootmode..
6.)wait for it to finish reading the firmware then save it to the corporate folder you wish to save it.
7.)when you try to input the code on the screen lock it always says INVALID PASSWORD.
8.)this is the FINAL step thick FORMAT then click RUN while holding the HOME button then wait for it to finish formatting done........

PIC'S OF LOG'S::



here's the backup file after formatting it!!!(the backup file size is 16mb)::
http://www.mediafire.com/download/7k...backup16mb.bin
​