- Joined
- Feb 23, 2015
- Messages
- 1,961
- Reaction score
- 6
- Points
- 181
Km555e Restart then yellow green ang Screen Done via Flashing
Loading module , please wait...
PMB8878 Module 2.0 started. SW: Ver 3.2.0.0
Connecting to KM555E in USB Mode...
Please connect phone , it must be powered off
Port open error (INVALID_HANDLE_VALUE)
BOOT Failed
Disconnected.
TIP: Please reconnect phone battery / power source.
Loading module , please wait...
PMB8878 Module 2.0 started. SW: Ver 3.2.0.0
Connecting to KM555E in USB Mode...
Please connect phone , it must be powered off
Port open error (INVALID_HANDLE_VALUE)
BOOT Failed
Disconnected.
TIP: Please reconnect phone battery / power source.
Loading module , please wait...
PMB8878 Module 2.0 started. SW: Ver 3.2.0.0
Connecting to KM555E in USB Mode...
Please connect phone , it must be powered off
Phone found! (MCU:SG3_USB) prebooting...
Flash ID: 00FF00
*Note in USB mode flash id can be incorrectly read*
Force boot mode on!
Finished in 0 seconds
Found firmware version marker...
Opening "ROM_KM555eAT-00-V10a-CIS-XX-DEC-02-2009+0.bin"...
Writing Firmware...
Sending SEC pack...
Failure get 1st answer from bootloader...
Certificate Failed!
Finished in 12 seconds
Disconnected.
TIP: Please reconnect phone battery / power source.
Loading module , please wait...
PMB8878 Module 2.0 started. SW: Ver 3.2.0.0
Connecting to KM555E in USB Mode...
Please connect phone , it must be powered off
Phone found! (MCU:SG3_USB) prebooting...
Flash ID: 00FF00
*Note in USB mode flash id can be incorrectly read*
Force boot mode on!
Finished in 8 seconds
Opening "ROM_KM555eAT-00-V10a-CIS-XX-DEC-02-2009+0.bin"...
Writing Firmware...
Sending SEC pack...
Failure get 1st answer from bootloader...
Certificate Failed!
Finished in 6 seconds
Disconnected.
TIP: Please reconnect phone battery / power source.
Loading module , please wait...
PMB8878 Module 2.0 started. SW: Ver 3.2.0.0
Connecting to KM555E in UART Mode (COM13 ,921600)
Please reconnect battery, press and hold power button...
Phone found! (MCU
MB8868) prebooting...Release power button. Booting...
Changing Speed...
Reading info...
Force boot mode on!
Finished in 20 seconds
Opening "ROM_KM555eAT-00-V10a-CIS-XX-DEC-02-2009+0.bin"...
Writing Firmware...
Sending SEC pack...
Writing done!
Finished in 147 minutes 16 seconds.