KP501 Power Off Done w/procedure & Flashfile

[arvhi]

procedure:

1, connect z3x box to PC

2, connect USB or Rj45 cable to z3x box

3, check connect USB or UART

4, load Flashfile

5, then write for flasing and waiting to finish



Welcome to Z3X LG Multi Platform TOOL
Current OS : Windows XP
Welcome to Sgold3 Module!!
Disconnected.
TIP: Please reconnect phone battery / power source.
Disconnected.
TIP: Please reconnect phone battery / power source.
Count supported models - 138
Loading module , please wait...
PMB8877 Module 2.0 started. SW: Ver 3.7.1.3
Connecting to LG KP501 in USB Mode
Please connect phone , it must be powered off
Phone found! (MCU:SG3_USB) prebooting...
Flash ID: 018903
*Note in USB mode flash id can be incorrectly read*
BOOT Stage Finished , sending authority...
Sending SEC pack...
Reading eeprom ...
EEPROM Backup Saved AS:C:\Program Files\Z3X\LG\LGI_SG3\BACKUP\LG KP501_autobackup_17042012_004135.eep
Detailed Phone Information:
Phone Model: KP500
Phone Manufacturer: LG Elec. Inc
Phone Version: Aug 05 2008
Phone IMEI : 35701403100259500
Phone BT Adress : 00:25:E5:48:30:1E
Detailed Codes Information:
Phone NCK Code : 8605-8110
Phone NS Code : 3123-8706
Phone SP Code : 7292-1739
Phone CP Code : 9954-4673
Phone SIM Code : 8631-8393
SimLocks Disabled
SP Lock Disabled
CP Lock Disabled
NS Lock Disabled
SIM Lock Disabled
AT Lock Disabled
SL Config:22201FFFFFFFFFFFFFFFFFFF
Finished in 2 seconds
Found firmware version marker...
Opening "KP501AT-00-V10h-268-03-JAN-13-2009+1.bin"...
Writing Firmware...
Sending SEC pack...
Writing done!
Finished in 36 minutes 10 seconds.