J
j4tech
Anonymous
KU9100 Hang Logo & Restart Successfully Fixed!//[Reference]
Octopus Box
KH4500 Combo Cable
Problem:
Trying To Flash By Other Repair Shop And Used Z3X LG BOX Because SMS Not Sending, But It Just Caused Damage To The Phone After, It Hangs On Logo And Keep Restarting
Open Octopus
Select Qualcomm
Select ComPort (phone must be in boot mode)
Select Firmware (KU910910_00.oct)
Select Connect Phone
Write Firmware (Read/Follow Carefully Pre-Caution To Avoid Damaging Phone)
Wait Patiently Until Done
How To Enter Boot Mode : Insert USB Cable + Reconnect Battery + Press Send + Power
Code:
Welcome to Octopus box software version 1.8.0 -------------------------------------------------------------------------------- Platform: LG Qualcomm Selected port: COM63 Selected model: KU9100 Mode: Emergency -------------------------------------------------------------------------------- Platform: LG Qualcomm Selected port: COM63 Selected model: KU9100 Mode: Emergency -------------------------------------------------------------------------------- Please, make sure the phone's battery is fully charged. Disconnect all other devices from the computer (including phones, modems, etc.) and close all other running programs. To avoid errors in the flashing process, use a clean PC (without any installed drivers for other Qualcomm-based devices). You should not run any other programs or attach new devices to your computer during the flashing! Please, follow these simple precautions to avoid damaging your phone. -------------------------------------------------------------------------------- Opening "KU910910_00.oct"...OK Writing Firmware... Erasing EFS...OK Writing MIBIB...OK Writing QCSBL...OK Writing OEMSBL1...OK Writing OEMSBL2...OK Writing AMSS...OK Writing FAT...OK Writing EFS2...OK Phone startup...OK Repairing NVM... Repairing NVM complete. Writing Firmware done! Rebooting phone... -------------------------------------------------------------------------------- Platform: LG Qualcomm Selected port: COM63 Selected model: KU9100 Mode: Normal Phone model: KU910910 SW Version: M6280A-KLRZ-4.0.95T IMEI: 352563-03-026053-4 Bluetooth address: 00:22:A9:4B:0B:FC Firmware compiled date: Aug 14 2007 Firmware compiled time: 19:00:00 Firmware released date: Jan 01 2010 Firmware released time: 18:26:00 -------------------------------------------------------------------------------- Platform: LG Qualcomm Selected port: COM4 Selected model: KU9100 Phone not detected. Please try again. -------------------------------------------------------------------------------- Platform: LG Qualcomm Selected port: COM63 Selected model: KU9100 Mode: Normal Phone model: KU910910 SW Version: M6280A-KLRZ-4.0.95T IMEI: 352563-03-026053-4 Bluetooth address: 00:22:A9:4B:0B:FC Firmware compiled date: Aug 14 2007 Firmware compiled time: 19:00:00 Firmware released date: Jan 01 2010 Firmware released time: 18:26:00 -------------------------------------------------------------------------------- Platform: LG Qualcomm Selected port: COM63 Selected model: KU9100 Mode: Normal Phone model: KU910910 SW Version: M6280A-KLRZ-4.0.95T IMEI: 352563-03-026053-4 Bluetooth address: 00:22:A9:4B:0B:FC Prepairing loader...OK Sending loader...OK Searching signatures... Signature #1...OK, not patched Patching... Signature #1...OK Phone successfully unlocked! Rebooting phone...
PS: You Need To Unlock The Phone Again After Flashing....
Octopus Box
KH4500 Combo Cable
Problem:
Trying To Flash By Other Repair Shop And Used Z3X LG BOX Because SMS Not Sending, But It Just Caused Damage To The Phone After, It Hangs On Logo And Keep Restarting
Open Octopus
Select Qualcomm
Select ComPort (phone must be in boot mode)
Select Firmware (KU910910_00.oct)
Select Connect Phone
Write Firmware (Read/Follow Carefully Pre-Caution To Avoid Damaging Phone)
Wait Patiently Until Done
How To Enter Boot Mode : Insert USB Cable + Reconnect Battery + Press Send + Power
Code:
Welcome to Octopus box software version 1.8.0 -------------------------------------------------------------------------------- Platform: LG Qualcomm Selected port: COM63 Selected model: KU9100 Mode: Emergency -------------------------------------------------------------------------------- Platform: LG Qualcomm Selected port: COM63 Selected model: KU9100 Mode: Emergency -------------------------------------------------------------------------------- Please, make sure the phone's battery is fully charged. Disconnect all other devices from the computer (including phones, modems, etc.) and close all other running programs. To avoid errors in the flashing process, use a clean PC (without any installed drivers for other Qualcomm-based devices). You should not run any other programs or attach new devices to your computer during the flashing! Please, follow these simple precautions to avoid damaging your phone. -------------------------------------------------------------------------------- Opening "KU910910_00.oct"...OK Writing Firmware... Erasing EFS...OK Writing MIBIB...OK Writing QCSBL...OK Writing OEMSBL1...OK Writing OEMSBL2...OK Writing AMSS...OK Writing FAT...OK Writing EFS2...OK Phone startup...OK Repairing NVM... Repairing NVM complete. Writing Firmware done! Rebooting phone... -------------------------------------------------------------------------------- Platform: LG Qualcomm Selected port: COM63 Selected model: KU9100 Mode: Normal Phone model: KU910910 SW Version: M6280A-KLRZ-4.0.95T IMEI: 352563-03-026053-4 Bluetooth address: 00:22:A9:4B:0B:FC Firmware compiled date: Aug 14 2007 Firmware compiled time: 19:00:00 Firmware released date: Jan 01 2010 Firmware released time: 18:26:00 -------------------------------------------------------------------------------- Platform: LG Qualcomm Selected port: COM4 Selected model: KU9100 Phone not detected. Please try again. -------------------------------------------------------------------------------- Platform: LG Qualcomm Selected port: COM63 Selected model: KU9100 Mode: Normal Phone model: KU910910 SW Version: M6280A-KLRZ-4.0.95T IMEI: 352563-03-026053-4 Bluetooth address: 00:22:A9:4B:0B:FC Firmware compiled date: Aug 14 2007 Firmware compiled time: 19:00:00 Firmware released date: Jan 01 2010 Firmware released time: 18:26:00 -------------------------------------------------------------------------------- Platform: LG Qualcomm Selected port: COM63 Selected model: KU9100 Mode: Normal Phone model: KU910910 SW Version: M6280A-KLRZ-4.0.95T IMEI: 352563-03-026053-4 Bluetooth address: 00:22:A9:4B:0B:FC Prepairing loader...OK Sending loader...OK Searching signatures... Signature #1...OK, not patched Patching... Signature #1...OK Phone successfully unlocked! Rebooting phone...
PS: You Need To Unlock The Phone Again After Flashing....