Lenovo a680 firmware fresh back up via cm2...

LOISAN

LOISAN

Registered
Joined
Oct 19, 2015
Messages
1,486
Reaction score
70
Points
201
Location
Puerto Princesa City, Palawan
LENOVO A680​

tjPuT4o.jpg

FIRMWARE HERE​

 
Last edited by a moderator:
di na talaga kita eh sangla sa pawnshop bos loisan ang galing mo na
 
cno po nakakalam password ne2.. pwede po share thanks
more powerssss
 
feedback

Dead Results
Chinese Miracle II [MTK module] v 1.58

Scatter Load Ok , BaseBand : MT6582 , Project : huaqin82_wet_e_jb5 , Storage : EMMC
Files found : 11 , Set to Flash : 10
Created by Infinity-Box (c) Chinese Miracle II (c) 2016
Device Brand : Lenovo
Device Model : A680
Device CPU : MT6582
Device IntName : Lenovo_A680_ROW
Device Version : 4.2.2
Device Compile : 3/10/2014 11:24:28 AM
Device Project : A680_ROW_S321_140310
Device ExtInfo : Lenovo A680_ROW
Ready to Flash!

Operation : Flash [ v1.58 ]

======= Flash
1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 19 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6582
BB_CPU_NME : [MediaTek] MT6582_S00
BB_CPU_EXT : 0xCA01 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with PRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07
Sending and initialize DA ...
Running DA ver.4.2 on BBID : 0x87
NAND Flash : NOT INSTALLED
eMMC Flash : 1501004B355530304D022C18CA62119B
Initialize Memory ...
DRAM already initialized by Preloader
DAgent sent , init HW now
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x15 , OEM : 0100
[eMMC] : FLASH_INF : [SAMSUNG] , M00U5
[eMMC] : FLASH_CID : 1501004B355530304D022C18CA62119B
[eMMC] : FLASH_BRT : 0x00200000 , 0x00200000 , 0x00020000
[eMMC] : FLASH_LEN : 0x00000000E9000000
[eMMC] : FLASH_UCP : 3728 MiB [eMMC 4 GiB]
DEV RID : 0xD4D01670DA060B3D768D87FF8DBE3383
INT RAM : 0x00020000
EXT RAM : 0x40000000 [1 GiB]
BOOT TYPE : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

ScatCFG : BaseBand : MT6582 , Project : huaqin82_wet_e_jb5 , Storage : EMMC
Setting : Flash Pre-Erase (Safe) : Enabled
Setting : AFF verify : Enabled
Setting : HW verify : Enabled

BL : Check HW compatibility
BL : BBID supported by BootLoader!
BL : Check eMMC compatibility
BL : eMMC supported by BootLoader!

BL : BatteryLevel : 3955 mV
BL : BatteryLevel Ok

BL : Flash Pre-Erase
Total blocks to Erase : 2
Erase : 0x0000000001400000-0x0000000000100000
Erase : 0x0000000003100000-0x00000000E5280000
Flash Pre-Erase Done, time used : 00:00:00

SecCfg Passed , 1799
BMT remark not need. Will skip
Sending Preloader ...
Use : preloader_huaqin82_wet_e_jb5.bin
Preloader Sent , Init passed
SecCfg Passed , 1799
PartCount : 0012
Update PMT by user request
Repartition Done!
Use FLN Mode

Processing : Flash Write
Flash now : MBR
Image Flash Ok
Flash now : EBR1
Image Flash Ok
Flash now : UBOOT
Image Flash Ok
Flash now : BOOTIMG
Image Flash Ok
Flash now : RECOVERY
Image Flash Ok
Flash now : SEC_RO
Image Flash Ok
Flash now : LOGO
Image Flash Ok
Flash now : ANDROID
Image Flash Ok
Flash now : CACHE
Image Flash Ok
Flash now : USRDATA
Image Flash Ok
Flash Write Done, time used : 00:24:05

Processing : Verify
Verify Passed : MBR
Verify Passed : EBR1
Verify Error! Something went wrong!
ErrCode : 0x488A

Operation Failed
Elapsed: 00:24:20
Reconnect Power/Cable!
Click to expand...
 
salamat sir
sakto yan dito :)
HANG ON LOGO

17619459_1413072815416363_311331686_n.jpg

17618873_1413072438749734_1631194113_n.jpg


pabulong ng password sir. salamat sa pag share
 
thank you sir!
ang laking bagay ng mayrong taong katulad nyo :)
 
?boss working ung firmwasre kaya lng nvram warning .. pano po ma fix un ?
 
Salamat sa pagshare boss
papm din po ng pass
Thanks ulit
 
You must log in or register to reply here.
Who read this thread (Total readers: 0)
No registered users viewing this thread.
Back
Top