REFERENCE LENOVO S820 BACK UP sa nck dongle.

[akiko]

mgs boss share kuLng Lenovo s820 backup ko sa nckdongle,,mtk
baka maka tulong,,

Action : Read Firmware.
Selected 0-By CPU:ELBRUS
Exe version: NCKDongle AndroidMTK 2.6.0.0
Reinsert phone battery.
Battery must be charged.
Phone must be off with battery inside.
Please insert USB cable now...
Detected : MediaTek PreLoader USB VCOM (Android) (COM10)
Boot mode: Preloader
BBCHIP: 6583 1 ca01
Using Algo 1.
Phone detected...Please wait
Sending DA agent, please wait...
----------------------------------------------------
BaseBand CPU :MT6589
BaseBand CPU Secure Version : FF
BaseBand CPU Bootloader Version : 01
----------------------------------------------------
INT RAM: 128 KB SDRAM
EXT RAM: 1 GB DRAM
----------------------------------------------------
EMMC: (58Gb+8192Mb) SAMSUNG 0x4b375530304d
EMMC FW VERSION: 08:00:00:00:00:00:00:00
EMMC CID: 1501004B375530304D : 00000000000000
EMMC UA SIZE: 0x1d2000000
BOOT STYLE: EMMC BOOT
FULL LENGTH: 0x1d2420000 [7.285 GB]
Status: USB_HIGH_SPEED
Detecting high speed port, wait......
If driver not installed, install high speed port driver.
If not need high speed port, disable it.
After repeat opperation.
Detected : MediaTek DA USB VCOM (Android) (COM9)
Build ID: JOP40D
Display ID: S820_ROW_8G_S124_140404
Model: Lenovo S820_ROW
Sw Internal Version: Lenovo S820_ROW_8G_S124_140404
Version: 4.2.1
Build Date: Fri Apr 4 16:40:50 CST 2014
Brand: Lenovo
Device: S820_ROW
Manufacturer: LENOVO
Region: US
Mediatek Version Release: ALPS.JB2.MP.V1
IMEI[1]: 860365028856066
IMEI[2]: 860365028856074
Dumping Preloader.
Start dumping flash, this can take up to 1 hour.......
[0]Start processing pmt
Reading: BEGIN: 0x700000 - LEN: 0x1000
Start processing proinfo
Reading: BEGIN: 0xb00000 - LEN: 0x300000
Start processing nvram
IMEI[1] from NVRAM: 860365028856066
IMEI[2] from NVRAM: 860365028856074
Start processing PROTECT_F
Reading: BEGIN: 0x1300000 - LEN: 0xa00000
Start processing PROTECT_S
Reading: BEGIN: 0x1d00000 - LEN: 0xa00000
Start processing UBOOT
Start processing BOOTIMG
Start processing RECOVERY
Start processing LOGO ......
Start processing system
Reading: BEGIN: 0x10f80000 - LEN: 0x30000000
Start processing CACHE
Reading: BEGIN: 0x40f80000 - LEN: 0x17a00000
Start processing USRDATA
Reading: BEGIN: 0x58980000 - LEN: 0xc0000000
Start processing FAT
Reading: BEGIN: 0x118980000 - LEN: 0xb85a0000
Saved to : C:\Users\akiko\Documents\Android_MTK\firmware_backup\MT6589_EMMC_JOP40D__Lenovo S820_ROW_4_2_1_Lenovo_2019_09_13_17_43)
Wait untill phone will start charging.
[0]All done

free wlang pass.
firmware here : akiko

,, sana makatulong..