hang after 3minutes
done sa flashing
Welcome to Octoplus/Octopus Box LG Software version 2.5.1done!
--------------------------------------------------------------------------------
Checking data...OK
Platform: LG Qualcomm
Selected port: COM8
Selected model: D320
Reading info...
Could not detect mode!
Performed by 2.5.1 Software version.
--------------------------------------------------------------------------------
Checking data...OK
Platform: LG Qualcomm
Selected port: COM65
Selected model: D320
Reading info...
Model ID: LG-D320
IMEI: 35292
Android version: 4.4.2
Battery level: 54%
SW Version: D32010a
Mode: Normal
Firmware compiled date: Jan 22 2014
Firmware compiled time: 01:00:00
Firmware released date: Mar 4 2014
Firmware released time: 20:05:58
SW Version: M8610B-AAAANAZM-1.0.6029
IMEI: 35292
SPC: 000000
--------------------------------------------------------------------------------
Writing phone firmware without real necessity is at your own risk.
Downgrade may lead to phone damage!
Please, make sure the phone's battery is fully charged.
Disconnect all other devices from the computer (including phones,
modems, etc.) and close all other running programs.
To avoid errors in the flashing process, use a clean PC (without any
installed drivers for other Qualcomm-based devices).
You should not run any other programs or attach new devices to your
computer during the flashing!
--------------------------------------------------------------------------------
Opening "D32010c_00.oct"...OK
Switching to Download mode...OK
Initializing flash...OK
Setting options...OK
Reading partitions...OK
Formating USERDATA...OK
Writing PrimaryGPT...OK
Writing modem...OK
Writing sbl1...OK
Writing rpm...OK
Writing tz...OK
Writing sdi...OK
Writing aboot...OK
Writing rpmb...OK
Writing tzb...OK
Writing abootb...OK
Writing persist...OK
Writing laf...OK
Writing boot...OK
Writing recovery...OK
Writing factory...OK
Writing sbl1b...OK
Writing system...OK
Writing BackupGPT...OK
Reading partitions...OK
Formating RCT...OK
Formating MPT...OK
Finalizing...OK
Writing firmware done!
Performed by 2.5.1 Software version.
done sa flashing
Welcome to Octoplus/Octopus Box LG Software version 2.5.1done!
--------------------------------------------------------------------------------
Checking data...OK
Platform: LG Qualcomm
Selected port: COM8
Selected model: D320
Reading info...
Could not detect mode!
Performed by 2.5.1 Software version.
--------------------------------------------------------------------------------
Checking data...OK
Platform: LG Qualcomm
Selected port: COM65
Selected model: D320
Reading info...
Model ID: LG-D320
IMEI: 35292
Android version: 4.4.2
Battery level: 54%
SW Version: D32010a
Mode: Normal
Firmware compiled date: Jan 22 2014
Firmware compiled time: 01:00:00
Firmware released date: Mar 4 2014
Firmware released time: 20:05:58
SW Version: M8610B-AAAANAZM-1.0.6029
IMEI: 35292
SPC: 000000
--------------------------------------------------------------------------------
Writing phone firmware without real necessity is at your own risk.
Downgrade may lead to phone damage!
Please, make sure the phone's battery is fully charged.
Disconnect all other devices from the computer (including phones,
modems, etc.) and close all other running programs.
To avoid errors in the flashing process, use a clean PC (without any
installed drivers for other Qualcomm-based devices).
You should not run any other programs or attach new devices to your
computer during the flashing!
--------------------------------------------------------------------------------
Opening "D32010c_00.oct"...OK
Switching to Download mode...OK
Initializing flash...OK
Setting options...OK
Reading partitions...OK
Formating USERDATA...OK
Writing PrimaryGPT...OK
Writing modem...OK
Writing sbl1...OK
Writing rpm...OK
Writing tz...OK
Writing sdi...OK
Writing aboot...OK
Writing rpmb...OK
Writing tzb...OK
Writing abootb...OK
Writing persist...OK
Writing laf...OK
Writing boot...OK
Writing recovery...OK
Writing factory...OK
Writing sbl1b...OK
Writing system...OK
Writing BackupGPT...OK
Reading partitions...OK
Formating RCT...OK
Formating MPT...OK
Finalizing...OK
Writing firmware done!
Performed by 2.5.1 Software version.