Lg e420 hang on logo done by z3x lg activated

[jerrenn]

tools needed:
z3xbox lg activated "pm boss intoy for activation"
usb cable
lg qualcomm driver


OPEN SHELL DOWNLOAD FIRMWARE

open z3x lg tool
load firmware
switch the phone into download mode by pressing
volume down +power botton +sabay salpak udb cable
on lg tool hit search phone kailangan madetect as emergency mode
hit flash;
logs:

LG 2-3G Tool v8.1
supported models: 1040

Reading timeout, check cable
Error Code: ReadInfo,1,1
Elapsed: 33 secs. --> (v8.1)

Reading timeout, check cable
Error Code: ReadInfo,1,1
Elapsed: 72 secs. --> (v8.1)

Not detect phone! Please manual select port or reboot PC!
Mode: Emergency
Model: LGE420
Elapsed: 0 secs. --> (v8.1)

Mode: Emergency
Model: LGE420
Elapsed: 0 secs. --> (v8.1)

Open port COM22... done
Get Phone Mode... NOTDEFINE or ERR
Get Phone Status... done
Detected mode "3G QCT - PHONEMODE_EMERGENCE"
SetSecurityMode... done
Check Phone Info... done
[DLOAD]IMEI : 357675-05-0217874
[DLOAD]PID : CY09S130913002168
SetCurrentStep... done
Read AP header... done
Flashing firmware
Flashing part QCSBL... done
Flashing part OEMSBL... done
Flashing part EXT... done
Flashing part APPSSBL... done
Flashing part APPS... done
Flashing part MODEM... done
Flashing part MODEM_BACKUP... done
Flashing part SYSTEM... done
Flashing part PERSIST... done
Flashing part RECOVERY... done
Flashing part BOOT_LOGO_IMAGE... done
Flashing part CUST... done
Reboot...
Elapsed: 325 secs. --> (v8.1)

salamat sa pag view

 

[joggaboy2]

sarap naman nyan...
gusto ko paactivate nyan pero wala pa ako mga cables pag lg..
usb lang ba or rj45 ports madalas gamitin?