LG Gb230 unlock via Z3x

[PhoneWar]

use ke500 rj45 cable
select direct unlock
then press UNLOCK button

logs here:

TIP: Please reconnect phone battery / power source.
Loading module , please wait...
PMB8810 Module 1.0b started. SW: Ver 2.2.8.0
Connecting to GB230 in UART Mode (COM5 ,921600)
Please reconnect battery, press and hold power button...
Phone found! (MCUMB8810) prebooting...
Release power button. Booting...
Reading info...
Flash ID: 0x8981
BOOT Stage Finished , sending authority...
Sending SEC pack...
Reading ...
Sending SEC pack...
Backup Saved AS:C:\Program Files\Z3X\LG\LGI_SG3\BACKUP\GB230_autobackup_30122 010_170147.eep
Analising EEPROM...
Phone IMEI:35436203563****
Unlock codes:
NCK[0]: 0000000000000000
NCK[1]: 0000000000000000
NCK[2]: 0305021151395289
NCK[3]: 0305021151395289
NCK[4]: 0305021151395289
NCK[5]: 0000000000000000
NCK[6]: 0305021151395289
NCK[7]: 0305021151395289
TIP: For additional codes , select Read Codes option and click Unlock button
Finished in 13 seconds
Sending SEC pack...
Reading ...
Sending SEC pack...
Analising EEPROM...
Phone IMEI:35436203563****
Phone IMEI:35436203563****
For operation finishing,do next :
1. power phone ON with original SIM
2. type 2945#*71001# to enter unlock menu
3. Enter one of this code(s):
Unlock codes:
NCK[0]: 0000000000000000
NCK[1]: 0000000000000000
NCK[2]: 0305021151395289
NCK[3]: 0305021151395289
NCK[4]: 0305021151395289
NCK[5]: 0000000000000000
NCK[6]: 0305021151395289
NCK[7]: 0305021151395289
Finished in 13 seconds
Unlocking...
Sending SEC pack...
Reading EEPROM....
Backup Saved AS:C:\Program Files\Z3X\LG\LGI_SG3\BACKUP\GB230_autobackup_30122 010_170224.eep
Analising EEPROM...
Phone IMEI:35436203563****
SimLock Data Cleared!
Sending SEC pack...
Erasing EEPROM....
Erasing done!
Writing EEPROM....
Sending SEC pack...
Unlock done!
Finished in 22 seconds