Attach testpoint as shown on M700 TP, and connect phone with Micro USB cable (don´t use USB hubs!)
Check PC Device Manager, a new device should appear "Qualcomm HS-USB QDLoader 9008" or "Unknown Device" if you hadn´t installed a driver. Drivers are in {Installation_Folder}\Driver\QHSUSB.
Release testpoint and press "Reset FRP Lock" button.
Follow software instructions (prompts).
Performed by 2.8.0 Software version.
To perform Reset FRP operation do the next:
1. Attach testpoint as shown on Figure in manual, and connect phone with
Micro USB cable.
2. Check PC Device Manager, a new device should appear "Qualcomm HS-
USB QDLoader 9008".
3. Release testpoint.Canceled!
Performed by 2.8.0 Software version.
To perform Reset FRP operation do the next:
1. Attach testpoint as shown on Figure in manual, and connect phone with
Micro USB cable.
2. Check PC Device Manager, a new device should appear "Qualcomm HS-
USB QDLoader 9008".
3. Release testpoint.
Found port COM6
Connecting...OK
Sending loader...OK
Reconnecting phone...OK
Checking request...
Request has been successfully sent!
Obtaining response...OK
Reading partitions...OK
Searching signatures...
Step 1...
Step 2...
Step 3...
Resetting FRP Lock...
Rebooting phone...
Performed by 2.8.0 Software version.