LG900GB convert to GW300 and unlock done by octupos[Reference]

[j4tech]

LG900GB convert to GW300 and unlock done by octupos[Reference]

LG900GB convert to GW300 Done by Octopus


Tools:

- Octopus Box
- micro usb cable

Procedure:

- open octopus software
- insert usb cable to phone w/out battery
- install usb driver
- select GW300 firmware
- tick write firmware
- wait till finished
- tick read codes
- type 2945#*71001#
- Enter Unlock codes
- Done

eto po yung log:

Platform: LG Analog Devices
Selected port: USB
Selected baudrate: 921600
Selected model: GW300
Disconnect battery and connect USB cable to phone...
Phone found.
Sending preloader...OK
Reconnecting phone...OK
Sending first loader...OK
Sending second loader...OK
Flash ID: ECB1
Flash type: Samsung
Reading info. Please wait...OK
IMEI: 012192-00-088371-1
Opening "GW300AT-00-V10a-206-01-SEP-02-2009+1.oct"...OK
Writing Total BIN...
Repair mode: No
Writing Firmware...
Writing Firmware done!
----------------------------------------------------------------------------------
Reading codes. Please wait...OK
Unlock code: 1598 3014 6821 6729
Unlock code: 1598 3014 6821 6729
Unlock code: 1598 3014 6821 6729
To finish the operation, please perform the following steps:
1. Insert the original SIM card and type 2945#*71001#
2. Enter the code.
----------------------------------------------------------------------------------

ETO PO YUN FIMEWARE NIYA http://www.sendspace.com/file/k2y63v

SLAMAT​