Lumia 550 RM-1127 Hang Sa Restarting Logo Done With Advance Box

[omairlee01]

Lumia 550 RM-1127 Hang Sa Restarting Logo Done With Advance Box

Bahagi Ko lang Mga Boss Lumia 550


First


Download Ang Firmware Sa Atf Request Navi-file Na Makikita Sa Windows Phone Tab

2nd

Install Ang Driver Kung Hinde Pa Naka Install ay Install Mo lang Para Walang Abirya Sa Flasing

Driver Is located on C/advance box / Driver / nokia x2 Emergency Drive /

3rd

Open Mo Si ATF Box / Select Windows Phone /Write Flash Browse Firmware Kung saan Mo Nilagay Then Tick Flash

Power Off the Phone Press & Vol. Down Power Button Connect Mo si Usb At Hantayin Mo Lang Mag Flash

ScreenShots

Flashing Done

[CENTER]Windows Phone 8/8.1/10 Flashing Started
 Loading Flash Files Please Wait...

 ======================================================
          Windows Phone 8/8.1/10 Lumia Flasher           
 ======================================================

 If the Phone is ALIVE                                 
   1. Power On the Phone and Connect it to the USB Port

 If the Phone is DEAD                                  
   1. Connect Phone to the USB Port                    
   2. Press and Hold the VOLUME DOWN and POWER Buttons 
   3. Wait until the Phone Vibrates Shortly...         
   4. Stop Pressing the Buttons...                     

 If the Phone is DEAD BOOT                             
   1. Connect Phone to the USB Port                    
   2. Install Correct Drivers:                         
      "Nokia Emergency Connectivity" Located at:       

  C:\AdvanceBox Turbo Flasher\Driver\NOKIA_X2_USB_DRIVERS\
 ======================================================

 Nokia Phone Info Mode Initiated...
 Please wait upto 15 Seconds for SW Reset

 1. Press and Hold the VOLUME DOWN and POWER
 2. Wait until the Phone Reboots...
 3. Wait until you see BIG "NOKIA" Logo
 4. Stop Pressing the Buttons...             
 IMEI: 353691072659963
 Version: 2.5.2.24
 Product Code: 059X5C0
 Module Code: 0206806
 Basic Tranceiver Code: 059X232

 Continuing Previous Boot...
 Please wait upto 30 Seconds for Boot Re-entry

 Boot Flash Mode Successful...
 Buffers Flushed OK...

 Phone Info Query Start...
 Blocks Returned: 0x09 Blocks
 Block ID 0x01 : 00241000
 Block ID 0x1F : 01
 Block ID 0x02 : 00240000
 Block ID 0x03 : 00E90000
 Block ID 0x05 : Microsoft.MSM8909.P6236.2.0
 Block ID 0x0D : 0001
 Block ID 0x0F : 0301010100000101FF
 Block ID 0x10 : 01000F0000
 Block ID 0x20 : 010000000100000004
 Checking SD Card Size...
 Card Size: 0x00000000
 Checking Platform Security Status...
 Platform Secure Boot Status: Active
 Secure FFU EFUSE Status: Active
 Debug Status: Active
 RDC Status: Not Active
 Authentication Status: Not Active
 UEFI Secure Boot Status: Active
 Checking Secure FFU Mode...
 Secure FFU Mode : 
 Query Flash App Information...
 Flash App Information: 020229024B00
 UEFI App: FLASH APP
 Flash App Protocol Version: 2.41
 Flash App Implementation Version: 2.75
 Query ROOT KEY HASH...
 ROOT_KEY_HASH: 56BDC3746226E080146D4D30C8C8432657A5282F050B1994CFE84971C586FAB9
 Query PUBLIC ID...
 PUBLIC_ID: DD22A56B4816D4BDF9A3606D35ED9CA4FE1F7FC7
 Query eMMC Info...
 EMMC Manufacture ID: SAMSUNG
 EMMC Product SN : DE37EEA2
 EMMC_SIZE: 8 Gigabytes
 Query Battery Charge Status...
 BATTERY CHARGE_STATUS: 24%

 Sending Image Signatures...
 Image Signatures Accepted!
 Erasing Data Partition...
 Data Partition Erased Successfully
 Preparing Buffers for DATA LOOP...
 Allocating System RAM OK!
 Start Sending DATA BLOCKS...
 Finished Sending all DATA BLOCKS!
 Exiting FLASH Mode via REBOOT...
 Exit FLASH Mode Successful!

 Flashing Done!
 Total Flashing Time : 00:04:23
[/CENTER]

​