What's new
PinoyTechnician

This is a sample guest message. Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!

Lumia 610 Unlock Via TP

appeasedguy8818

Registered
Joined
Jun 12, 2014
Messages
63
Reaction score
1
Points
1
Lumia 610 Unlock via TP

lumia 610 unlock done


Phone Type : Lumia 610 RM-835 - Supported
: Lumia 610 RM-849 - Supported
: Lumia 610C RM-836 - Supported
Unlock Type : Read PIN and PUK Unlock Codes
Other Notes : Disconnect USB Cable before Reading Codes
================================================== ========
1. Make sure JTAG Connection is 100% OK
2. Always Disconnect the Phone BATTERY
3. Connect RJ-45 JTAG Cable to ATF Box
4. Disconnect USB Cable from the Phone
5. DO NOT click RESET JTAG button
6. Click READ CODES button to Start Reading Unlock Codes
----------------------------------------------------------
Disconnect USB Cable from Phone (If Connected)
Re-Connect USB Cable to Phone...
Connect USB Cable to Phone...OK
USB Connected! Waiting for First Event...OK
Disconnect USB Cable Now...OK
Re-Connect USB Cable to Phone...
Waiting for Device Connection 10 second(s)...OK
Resetting and Exploring JTAG chain...OK
Halting Core...OK
Initializing Device...OK
Retrieving Unlock Codes...OK
===================================
Service Provider Unlock Codes Found
===================================
Level 1 PIN: 13577983 ACTIVE
Level 1 PUK: 61343788 ACTIVE
Level 2 PIN: 32432255
Level 2 PUK: 29597676
Level 3 PIN: 45787845
Level 3 PUK: 45765464
Level 4 PIN: 34563849
Level 4 PUK: 4587451
Level 5 PIN: 46729387
Level 5 PUK: 85461360
===================================
Reading Unlock Codes Done!

================================================== ==========================
1. Remove JTAG Connection and Assemble Phone
2. Insert SIM Card from different Provider into the Phone
3. Power ON the Phone
4. Enter 8-digit PIN Code or 8-digit PUK Code when Phone Requires it
5. After Code is accepted, wait 30 seconds until Operator Signal Appears

Write Down 8-digit PIN CODE on a piece of paper and attach
it to the phone under the battery. This will allow the owner
of the phone to unlock this phone again if he will flash the
phone firmware in the future.
================================================== ================
Report Post Reply With Quote
 
Back
Top