M706-888E__M706-888E hang logo failed

[jevy]

back up sa CM2 reflashing again now is dead, kahit anong version nito laging





Card found : S/N : A08D13E3 , v0136
Chinese Miracle II [MTK module] v 1.58

Scatter Load Ok , BaseBand : MT6572 , Project : w706 , Storage : EMMC
Files found : 11 , Set to Flash : 10
Created by Infinity-Box (c) Chinese Miracle II (c) 2016
Device Brand : alps
Device Model : M706-888E
Device CPU : MT6572
Device IntName : M706-888E
Device Version : 4.4.2
Device Compile : 11/10/2016 1:49:37 AM
Device Project : ALPS.KK1.MP7.V1.44
Device ExtInfo : M706-888E
Ready to Flash!

Operation : Flash [ v1.58 ]

======= Flash
1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 16 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6572
BB_CPU_NME : [MediaTek] MT6572_S00
BB_CPU_EXT : 0xCA01 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer : 0x0005
BLVersion : 0x00FE
PreLoader : NOT Active [ Erased ]
BootLdrSS : NORMAL with PRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07
Sending and initialize DA ...
Running DA ver.4.2 on BBID : 0x88
NAND Flash : 00B000B000B000B000B000B000B00000
eMMC Flash : NOT INSTALLED
Initialize Memory ...
DRAM configured from ScatFW!
DRAM initialize passed!
DRAM size : 0x20000000
DAgent sent , init HW now
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x00 , OEM : 0000
[eMMC] : FLASH_INF : [NOT_IN_BASE] ,
[eMMC] : FLASH_CID : 00000000000000000000000000000000
[eMMC] : FLASH_BRT : 0x00000000 , 0x00000000 , 0x00000000
[eMMC] : FLASH_LEN : 0x0000000000000000
[eMMC] : FLASH_UCP : 0 MiB [eMMC BAD_CONN]
DEV RID : 0xD8DB27F1ACB08701A79A75CE78183345
INT RAM : 0x00020000
EXT RAM : 0x20000000 [512 MiB]
BOOT TYPE : DA_HANDSET_ROM_INFO_NOT_FOUND
SOC VERIFY : C1
Boot Ok!

ScatCFG : BaseBand : MT6572 , Project : w706 , Storage : EMMC
Setting : Flash Pre-Erase (Safe) : Enabled
Setting : AFF verify : Enabled
Setting : HW verify : Enabled

Switching to HSUSB
HSUSB Init Ok
BL : Check HW compatibility
BL : BBID supported by BootLoader!
BL : Check eMMC compatibility
BL : Only one records found, and determined as universal
BL : eMMC supported by BootLoader!

BL : BatteryLevel : 3775 mV
BL : BatteryLevel Ok

BL : Flash Pre-Erase
Total blocks to Erase : 2
Erase : 0x0000000004000000-0x0000000000100000
Erase Error! Something went wrong!

Operation Failed
Elapsed: 00:00:28
Reconnect Power/Cable!




kailangan ko ang help thanks

 

[idolquh14]

flash mo sir sa sp flash tool lang sure tutuloy yan

 

[jevy]

ganun parin sa sp tool,


BOOM ERROR STORAGE NO MATCH, failed sa SP TOOL

 

[MIKAHEL01]

sira na yung ic nyan sir storage ic

 

[jevy]

EMMC sira siguro kasi hang logo ang sira nya, pero naka back up yung fw, pero biglang huminito...