REFERENCE Meizu M6T ( M811H ) Flyme Account Done.. Tricks Inside

[raicent28]

Unit/Model:
Meizu M6T ( M811H )

Problem:
Flyme Account

Solution:
Remove Via MRT Dongle

Tricks:
-Open MRT dongle
-Click Meizu Tool
-Click On Settings
-Choose Server1
-Choose MeiLan M6
-Check Remove Account
-Click Start

Dapat naka On ang phone
insert usb then Press Power Button hanggang Mag Off
At Madetect ang phone Then Bitaw
Wait mo nalang matapos

Logs:
​

Disconnect Mobile...
Re-Put the Mobile Bettery...
Then Connect your Phone to Computer again....
Please Make sure Mobile better has Power...
>>> Searching Mobile Port...
Get Mobile Port is: COM24
>>> Device driver identification:
MediaTek PreLoader USB VCOM_V1632 (Android)
>>> Mobile Has Connect...
CPU_NAME: MT6755
>>> Reading Mobile Hardware Info...Success
HW_Inf: 8A00 SW_Inf: CB00
>>> Initialization Mobile ...Success
>>> Downloading Boot1 To Mobile Phone...Success
Mobile phone status:SYNC...
Mobile phone status swtich to :brom... ÊÖ»ú״̬Ϊ: preloader
Make sure Mobile status has in :brom...
Init Mobile BOOT2 ...
=====================Flash Type(eMMC)==============
Flash Size: 0x0000000747C00000 -> 29820M
Flash ID: 0x150100475836424D
Flash Name: Samsung_Unknow
Flash symbol: GX6BMB
>>> Reading Mobile Map Data...Success
>>>>Geting Mobile info data...
ADD(HEX):0x0046B85C00 Size(HEX):0x0000700000
>>>>Writeing Mobile info data...
This Phone Support CDMA
SN has Change to :811HECUT2268
SN has Change to :811HECUT2268
>>>>Formating Mobile USER Data...
ADD(HEX):0x016D800000 Size(HEX):0x05D93FBE00
Corresponding operation completed!!!
After Finish;Disconnect usb cable,keep hold the power key 10s more,mobile will reboot!!!

​

Pics:

Thats it !!

Br,
raicent28​

 

[dyeyr]

sir baka may firmware ka po salamat

 

[dyeyr]

hang nlng po after format sken

 

[wowie]

hang nlng po after format ske

 

[wowie]

Unit/Model:
Meizu M6T ( M811H )

Problem:
Flyme Account

Solution:
Remove Via MRT Dongle

Tricks:
-Open MRT dongle
-Click Meizu Tool
-Click On Settings
-Choose Server1
-Choose MeiLan M6
-Check Remove Account
-Click Start

Dapat naka On ang phone
insert usb then Press Power Button hanggang Mag Off
At Madetect ang phone Then Bitaw
Wait mo nalang matapos

Logs:



Pics:

Thats it !!

Br,
raicent28​

sana may makapansin dito firmware bka mayron kyo

 

[jhal]

sana may makapansin dito firmware bka mayron kyo

hang logo dn saakn after pormat

 

[andrew]

hang logo dn saakn after pormat

ok naba yung unit mo idol nag hang na rin kasi after format

 

[King Huawei]

https://drive.google.com/file/d/1zMyqzIicDVFpa4adojPtRY5bCmJa45nd/view

 

[FredzyNoy]

baka yan problem ng meizu m6t m811h..may mga sumubok din hang nalang...pero sakin ok naman wala naman naging problema sakin

 

[FredzyNoy]

ctto https://www.antgsm.com/forum/threads/meizu-m6t-m811h-cm2-back-up.221832/
https://mega.nz/file/MqoD3A6D#IpT4Q5p970u8BDSEPGzAJ8Bb4Ilk-up7CgvNWuzs1c4

 

[FredzyNoy]

pakitry nyo rin tong sakin na bakup
https://www.mediafire.com/file/pvey...zu__M6T__7.0__Flyme_6.3.4.8G__fredzy.rar/file
Created by Infinity-Box (c) 2020
Chinese Miracle II : MediaTek Service Module
Device Info file : _Android_info.txt

Patch Level : NRD90M
Ver. CodeName : REL
Ver. Release : 7.0
Sec. Patch : 2019-08-01
Build Time : 1571283415
Board Platform : mt6750
Product Brand : Meizu
Product Manfct : Meizu
Display ID : Flyme 6.3.4.8G
Product Model : M6T
Product Name : Meizu_M6T
Product Device : MeizuM6T
Product Board : M6T
Product Info : M6T
pero bago flash backup din muna kayo kase tato klaase build ng ganito model

 

[Bhetamax]

http://www.flymeos.com/firmwarelist?modelId=113&type=1
firmware po yan pra sa mga naghhang na meizu m6t
sensya wala ako pics OTA po ang procedurenyan
1 press vol+ at power gang lumbas ang update na mkkita sa screen
tpos salpak usb makkita mo my recovery sa my computer mo dun mo
ilagay ang file, kpag naigay na start update gang mtapos

 

[cyclone]

hindi hang logo matagal lng tlaga mag optimizing bka nagmamadali masyado mga sumubok nag ok sakin hinintay ko lng

 

[cyclone]

tenks po master sa tut

 

[Dr.Tech]

may tanggap ako now password issue kaso panay labas na ng recovery mode haha

 

[jcboy]

pakitry nyo rin tong sakin na bakup
https://www.mediafire.com/file/pvey...zu__M6T__7.0__Flyme_6.3.4.8G__fredzy.rar/file
Created by Infinity-Box (c) 2020
Chinese Miracle II : MediaTek Service Module
Device Info file : _Android_info.txt

Patch Level : NRD90M
Ver. CodeName : REL
Ver. Release : 7.0
Sec. Patch : 2019-08-01
Build Time : 1571283415
Board Platform : mt6750
Product Brand : Meizu
Product Manfct : Meizu
Display ID : Flyme 6.3.4.8G
Product Model : M6T
Product Name : Meizu_M6T
Product Device : MeizuM6T
Product Board : M6T
Product Info : M6T
pero bago flash backup din muna kayo kase tato klaase build ng ganito model

sir ano ginamit mo pang flash?

 

[FredzyNoy]

sir ano ginamit mo pang flash?

cm2 paps