MFC Dongle Version 1.2.5 (2015-05-21 updated)★★★★★

[.::Gsmdenis::.]

We're Very happy to announce the release of MFC Dongle Version 1.2.5. While most of New functions adds and some bug fixes in the software.


Changelogs for MFC Dongle V1.2.5 ?


MacBook Changelogs:

• Add "EFI Boot Mode v2" option (New)
  • Add support different character Keyboard (World First)
  • Add Black Background Device unlock supported (World First)
  • Add Old & New Sensors Working supported
  • Add the "Alphabet" function
  • Add "Clear" memory logs function

iDevice Changelogs:

• iDevice iOS 7.x :
  • Add "iOS 7 auto V2.4" option (New)
    • Add light sensor connection status checks
    • The "Most Used 20 codes" function changed (1004 issue)
• iDevice iOS 8.x :
  • Add "iOS 8-8.1 auto V7" option (New)
    • Add Delay waiting Phone to charge function for each 50 reboots (World First)
    • Add light sensor connection status checks function
    • Add POWER/HOME button connection status checks function

iDevice Tools Changelogs:

• Add Read iDevice Full Information (IMEI & Serial) (World First)
• Graphical User Interface response time bugs fixed

MFC Tools Changelogs:

• Add Customize Calculator to set up the correct delay time for "iOS 8-8.1 auto V7" (World First)

Others Changelogs:

• Fixed bugs on Windows XP
• Some settings bugs fixed
• Other small reported bugs fixed

Upgrading to new Versions:

• We recommend all customers to upgrade to this latest version 1.2.5. The downloaded version of the software is available now, You can download from support page with valid membership.

MFC Dongle Online Manual

THE RIGHT TOOLS MAKES A DIFFERENT, THAT'S MFC

(Click On the image View Online)

 

[.::Gsmdenis::.]

MacBook Changelogs:

• Add "EFI Boot Mode v2" option (New)
  
  • Add support different character Keyboard (World First)
  • Add Black Background Device unlock supported (World First)
  • Add Old & New Sensors Working supported
  • Add the "Alphabet" function
  • Add "Clear" memory logs function

A . Due to different country have different Keyboard layout, so this update we have add different character Keyboard function to support unlock EFI passcode.

B. For different MacBook Mode. Some with white color Background screen and some with Black color Background screen, at Pre-version MFC did not Checks this before unlock. Now should be working 100%.

 

[.::Gsmdenis::.]

iDevice Changelogs:

• iDevice iOS 7.x :
  • Add "iOS 7 auto V2.4" option (New)
    • Add light sensor connection status checks
    • The "Most Used 20 codes" function changed (1004 issue)
• iDevice iOS 8.x :
  • Add "iOS 8-8.1 auto V7" option (New)
    • Add Delay waiting Phone to charge function for each 50 reboots (World First)
    • Add light sensor connection status checks function
    • Add POWER/HOME button connection status checks function
  
  

• 
  
  
  
  A. About iOS 7 , this update We Add light sensor connection status checks, This function can check before unlock sensor connected or not. If not connected, MFC Dongle 1 LED will be coming very fast blinking mode until you connect the sensor will be back to slowly. During Unlocking procedure, in some case, maybe the sensor cable get disconnect, MFC's 1 LED again getting fast blinking mode.
  
  
  B. About iOS 8 ,
  • V7 Update was improved from V6, So the unlocking procedure will be same as V6. but this update we have added "Delay waiting Phone to charge function" for each 50 reboots. Mean's each 50 reboots, MFC will be automatic stopping and Charging the Phone battery. So You have to set the delay time., Check below about How long time for delay we have to input when we write settings ?
  • About the light sensor connection status checks function. This can detect the light sensor if connected or gets enough light , If something wrong. the unlock procedure will be stop. Brightness icon will be stay showing.
  • About POWER/HOME button connection status checks function.
    • For "HOME button" will be automatic Check the Test Point if connect to iPower adaptor "P0" PIN. If not unlock procedure will be not continue.
    • For "POWER button" will be automatic Check If permanently pressed. If not unlock procedure will be not continue.
    • 
      Important Note! You need to take care about above issue when you start unlock. Due to if you don't do any actions, in 45 seconds, MFC will be RETRY.
  
  Why we need this Function ?
  
  Because Phone each reboots will be takes a lot of Power, so Phone can not gets time for Charge the battery. In V7 you need setting exact delay second times. Otherwise, if you can keep default settings. this can bring disabled risk once the phone become battery finish.
  
  
  How long time for delay we have to input when we write settings ?
  
  Due different phone with different battery life, so this need user calculate exact delay times. We have design one calculator at "MFC Tools" Tab.
  
  
  Is this V7 working on 8.1.1 8.1.2 8.1.3 and new iOS ?
  
  No , this version not support those versions.
  
  
  

  MFC Tools Changelogs:
  
  

  • Add Customize Calculator to set up the correct delay time for "iOS 8-8.1 auto V7" (World First)

  
  To "Customize Calculator" delay time required 4 values.
  
  We recommend using StopWatch to Calculator this. but first we need full charge the unlock phone to be 100%.
  
  
  For Example:
  
  • Reboot times - We recommend 30 times Reboot
  • Used percentage - This battery usage , E.g. 30 Reboot, Battery becoming to 80%. So we used 20%
  • Charging time (minutes) - Using 3 in 1 cable to Charging Phone Time. E.g. 20 minutes
  • Charging percentage - E.g. Charging 10%
  
  So v7 Delay time to input: 4000 (seconds)
  
  So , this means phone after 50 reboots, MFC will stop sending code to phone and keep waiting 4000 seconds to Charging the phone battery.
  
  
  ------------------------------------------------------------------------
  
  From 21 May When we release this new Version 1.2.5. Our beta tester report 1 issue that i have to explain here:
  
  Example (iPhone 6):
  
  
  
  Description:
  When start unlocking , We got 5 times chance to input the code per rebboot. but if you keeping unlock you may discovery the attempting time has been reduce to 2-4 times etc (Mean's 2-4 times input the code per reboot).
  
  
  Reason:
  Because the environment light have brought many changes on the phone screen that could be casing stability coefficient of the sensor.
  
  
  Solution:
  Put the unlocking sets in darkroom or in the dark cover to completely isolate the environment light.