REFERENCE Micronex MX 52 Flash File | MT6580 Download And Install Stock Rom

[jeff3]

Micronex MX 52 Flash File | MT6580 Download And Install Stock Rom
ne flash tool). This guide is also helpful to recover your kind any any software issue

Micronex MX 52 The Following issues Will be Solved By this Firmware.

• Fix your Micronex MX 52 bootloop & restart problem
• Auto fastboot mode and recovery
• Unroot or fix bugs your phone
• Remove Pin/Pattern/privacy/password & frp lock
• Upgrade and downgrade your phone
• Micronex MX 52 Fix stuck on logo
• Removes any virus, spyware or Adware unwanted apps
• Fix lcd/display black & white after flash
• Sp tools error while try to flash with other firmwares
• Micronex MX 52 Unbrick Dead After Flash

Firmware Details:

Device Brand:	Micronex
Model:	MX-52
OS Version:	Android 5.1 (Lollipop)
Processor:	MT6580 Mediatek Chipset
Driver:	MTK USB Driver
Tool Support:	Smart Phone (Sp Flash Tool)
File Size:	592MB
File Type:	CM2 Readed
Archive Format:	7zip
Uploaded Link:	Google Drive

MT6580__MICRONEX__MX-52__MX_52__5.1__ALPS.L1.MP6.V2.19_HCT6580.WEG.A.L_P55
Download Here

Before flashing this rom make sure to follow the pre-requisite and install the necessary have you drivers and tools on your PC And laptop to ready to flashing your Micronex MX-52
Pre-Requirements:

• This Firmware will only work on Micronex MX-52. Don’t try it on others model.
• A PC And Laptop
• A Good USB Data Cable
• should have your device charge the battery up to 60%
• Micronex MX 52 Rom And Flashtool/USB Drivers

After downloading the Micronex MX 52 Flash file Tools Driver From above link .you will need to use Smartphone Sp flash Tool to flash the Stock firmware. Here is a detailed guide mentioned below which you can follow completely Step by Step
Instructions to Flashing Stock ROM on Micronex MX 52

Step 1. Download Firmware ROM Included Winrar/7ip Flash Tool & Usb Driver
Step 2. Extract The ROM Or Driver And Tool On Your PC
Step 3. After Extracting You Will See Flash Tool, Driver And Instruction Manual
Step 4. Install the USB Drivers Skip If Drivers Are Already Installed
Step 5. Open The Sp Flash Tool And load The Scatter File From The Firmware Folder
Step 6. Click Download Button In The SP Flash Tool To Start Flashing
Step 7. Connect Your Smartphone To The Computer Using By Good USB Cable
Step 8. Green Rink Ok Massage Will Appear Of Successful Flashing Complete And You Done
Follow A simple Sp Tool Guide
How To Use Sp Flash Tool Guide With Photos Step By Step
You can follow our video tutriol Below
How To Use Sp Flash Tool Video Tutriol Guide