Movic W3 I8000 Firmware

[samboy]

link: https://www.mediafire.com/file/7x9djpvwcuo40ji/nasa_loob_antgsm.com.rar/file

may password po yan..

How To Flash Stock ROM Firmware On Movic W3 I8000
Step 1: Download the stock ROM zip file given above and extract it on your computer. You will find SP flash tool and Android scatter file after extracting.

Step 2: Now download Movic W3 I8000 USB driver and install it on your computer. In case if you have already installed USB driver on your computer skip this step.

Step 3: Next, switch off your Movic W3 I8000 smartphone and remove the battery (it is removable).

power-off-android

Step 4: Now go to the extracted folder in Step 1 and open up the SP Flash Tool sub-folder. You will find “Flash_tool.exe†file in it. Launch it.

stock-rom-flash-process

Step 5: Once SP Flash tool is launched, click on “Download†tab.

stock-rom-flash-process-2

Step 6: Now, click on “scatter-loading†button in the download tab.

stock-rom-flash-process-3

Step 7: Next, click on “Open Scatter File†and select the scatter file from Step 1. For reference see the image given below.

stock-rom-flash-process-4

Step 8: Now click on the “Download†button to start the flashing process.

stock-rom-flash-process-5

Step 9: Next, connect your Movic W3 I8000 Android device to your computer through original USB cable (without battery – if it is battery removable) and press volume up or volume down button.

Step 10: The flashing process will begin momentarily, and it will get completed in a minute or two. Once it is over, you will see the “Download OK†green ring in SP Flash Tool.​