N5000 power contact Done sa HTI!!

[belyan789]

Hang sa start up ayaw mag tuloy sa power

Program Agad

MXKEY [MxKey Team HTI Flasher Interface (WinUSB) 0], SN: 
Using device: HTI, FW ver: 00.50, SN:
Connection status: EHCI:HUB:HUB:USB 2.00 (Full-speed)
Driver: WinUSB, ver: 3.5.1.0 , NTMP ver: 6.1.7600.16385
Module ver: 1.0.0.21200(18-07-2012), Library ver: 1.0.0.14213(16-10-2012)
Rpl backup already exist (C:\mobileEx\3.5\data\backup\35692403373538_BACK.rpl).
Processing MCU file: rm362__06.31.mcusw 
 [DCT4,DCT4 ALGORITHM]  size: 11.87 MB
 Supported Ids: 3160, 3161, 3162, 3164, 3166
ASIC ID: 0x3162 [UPP_8M ver: 6.2]
 SecondaryBoot: u3_2nd.fia [DCT4] version: 4.76.0 revision: 0.7 size: 0x9A8
 Supported Ids: 3040, 2292, 2293, 3162, 3166, 3168
FlashID0: 0020 883C [ST ] page size: 128 K type: NOR area: 01000000-01FFFFFF - COMBO FLASH
ExtBUSC: AD7E B61B 00FF 1040 0000 0000 0000 0000 
 Algorithm: u3_intel.fia [DCT4 ALGORITHM] version: 4.76.0 revision: 0.7 size: 0x56A0
 Supported Ids: 3040, 2292, 2293, 3162, 3166, 3168
Performing Flash Authentication ...OK
UEM ID: 000FBF10:3B8ADA60
Area [01000000-0101FFFF] erased in 1.170 s
Area [01020000-01BFFFFF] erased in 1 min 52.632 s
Flash programming ...
Programming completed in 1 min 32.368 s
File processed in 3 min 33.315 s
Processing CNT file: rm362__06.31.image_ic_blu 
 [DCT4,DCT4 ALGORITHM] page size: 128 K  size: 5.25 MB
 Supported Ids: 3160, 3161, 3162, 3164, 3166
ASIC ID: 0x3162 [UPP_8M ver: 6.2]
 SecondaryBoot: u3_2nd.fia [DCT4] version: 4.76.0 revision: 0.7 size: 0x9A8
 Supported Ids: 3040, 2292, 2293, 3162, 3166, 3168
FlashID0: 0020 883C [ST ] page size: 128 K type: NOR area: 01000000-01FFFFFF - COMBO FLASH
ExtBUSC: AD7E B61B 00FF 1040 0000 0000 0000 0000 
 Algorithm: u3_intel.fia [DCT4 ALGORITHM] version: 4.76.0 revision: 0.7 size: 0x56A0
 Supported Ids: 3040, 2292, 2293, 3162, 3166, 3168
Performing Flash Authentication ...OK
UEM ID: 000FBF10:C5A4DA78
Area [02180000-02E7FFFF] erased in 2 min 1.261 s
Area [02E80000-02FBFFFF] erased in 11.840 s
Converting UCP blocks to 128 K.
Flash programming ...
Programming completed in 42.650 s
Extracting Content Pack, (c) Nokia File Server
Content Pack extracted successfully in 0.062 s
File processed in 3 min 26.091 s
Processing PPM file: rm362__06.31.ppm_ic 
 [DCT4,DCT4 ALGORITHM]  size: 3.89 MB
 Supported Ids: 3160, 3161, 3162, 3164, 3166
ASIC ID: 0x3162 [UPP_8M ver: 6.2]
 SecondaryBoot: u3_2nd.fia [DCT4] version: 4.76.0 revision: 0.7 size: 0x9A8
 Supported Ids: 3040, 2292, 2293, 3162, 3166, 3168
FlashID0: 0020 883C [ST ] page size: 128 K type: NOR area: 01000000-01FFFFFF - COMBO FLASH
ExtBUSC: AD7E B61B 00FF 1040 0000 0000 0000 0000 
 Algorithm: u3_intel.fia [DCT4 ALGORITHM] version: 4.76.0 revision: 0.7 size: 0x56A0
 Supported Ids: 3040, 2292, 2293, 3162, 3166, 3168
Performing Flash Authentication ...OK
UEM ID: 000FBF10:2984DA60
Area [01C00000-0217FFFF] erased in 52.681 s
Flash programming ...
Programming completed in 30.311 s
File processed in 1 min 30.074 s
Total time for flashing process(boot+erase+write) was 8 min 29.495 s
 
 
Phone type: RM-362 (Nokia 5000d-2)
SW version: V 06.31 24-03-09 RM-362 (c) Nokia             
Imei plain: 35692403373538-3
Imei OTP: 35692403373538
Product code: 0583203
Cellular system: GSM
ASIC ID: 0x3162, type: 11
Ppm Id: IC
Language Pack:
English,Arabic,French,Swahili

Master code: 6407044650
Camera config: GR0103D10126095A1F87, ver: 001.004
 
Imei net: 35692403373538
Version: SIMLOCK SERVER
Provider: GSM Test Operator
Counter: 0/3, 0/10
 
CONFIG_DATA: 0010100000000000
PROFILE_BITS: 000000000003000B
 
BLOCK1: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
BLOCK2: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
BLOCK3: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
BLOCK4: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
BLOCK5: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
BLOCK6: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
BLOCK7: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN

pasinsya na walang screenshot
wala kc ako webcam

Done!!​