N7100 rooting and unlocking..[SOLVED]
hinagilap ko muna sa google ang mga ito..
kababasa ko lang mga nasa taas.. :X
katulad ky nans1981 ang nagawa ko..
my procedure din ako pano root at unlock e2..
CF-Auto-Root
Odin3.07
bago simulan...
1) Download and install USB Drivers for Samsung Galaxy Note 2
2) Enable USB Debugging Mode. [Press Menu>> Settings>> Applications. From there, navigate and tap on Development option and ensure the USB Debugging is turned on]
3) Ensure 80 percent battery charge
4) Ensure data back-up
5) Ensure that the device is factory unlocked
Steps to root Galaxy Note 2 N7100 on Android 4.1.2 XXDLL7 Jelly Bean
1) Download CF-Auto-Root file for Galaxy Note 2 N7100 to the computer. Extract the zip file to get a .tar.md5 file within it
2) Download Odin v3.07 and extract the zip file
3) Power off the Note and place the device into Download Mode. Press and hold Volume Down, Home and Power buttons together. A warning message will be shown on the screen. Now press the Volume Up button to enter into Download Mode
4) Connect the phone to the computer using USB cable. A message saying 'Added' will appear under Odin's message box in the bottom left. Once the device is successfully connected to the computer, a COM port with a number in Yellow will be shown
5) Click the PDA button in Odin and select CF-Auto-Root-to3g-to3gxx-gtn7100.tar.md5
6) Ensure Auto Reboot and F.Reset Time checkboxes in Odin window are selected
7) Double-check everything and click the Start button in Odin to begin the flashing
8) Once the installation process completed, the phone will automatically reboot and soon a 'Pass' message with green background will appear in the extreme left box at the top of the Odin. Safely unplug the USB cable from the phone to disconnect it from the computer
Set up system language English (file: English.ini)
Welcome to Octopus Box Samsung software version 1.8.5
-----------------------------------------------------------------------------------
To connect GT-N7100 phone you have to perform the following steps:
1. Disconnect USB cable from phone.
2. Go to Menu->Settings->Developer options.
3. Turn on "USB Debugging" option.
4. When message is appear press "Yes".
5. Connect usb cable to phone.
6. Go to dial window.
7. Enter *#9090# number.
8. Set speed to 115200.
9. Go to dial window.
10. Enter "*#7284#" number.
11. Set "UART" radio button to "MODEM" value.
12. Set "USB" radio button to "PDA" value
13. Press "Read Info" in software.
-----------------------------------------------------------------------------------
Platform: Samsung Android
Selected port: COM180
Selected model: GT-N7100
Searching for a phone. Please wait...
Phone found.
Firmware compiled date: Thu Jan 24 17:06:13 KST 2013
Phone SN: RV1D21RD3NM
Android version: 4.1.2 (JZO54K)
Unlocking phone...
Phone is successfully unlocked
--------------------------------------------------------------------------------------
hinagilap ko muna sa google ang mga ito..
katulad ky nans1981 ang nagawa ko..
CF-Auto-Root
Odin3.07
bago simulan...
1) Download and install USB Drivers for Samsung Galaxy Note 2
2) Enable USB Debugging Mode. [Press Menu>> Settings>> Applications. From there, navigate and tap on Development option and ensure the USB Debugging is turned on]
3) Ensure 80 percent battery charge
4) Ensure data back-up
5) Ensure that the device is factory unlocked
Steps to root Galaxy Note 2 N7100 on Android 4.1.2 XXDLL7 Jelly Bean
1) Download CF-Auto-Root file for Galaxy Note 2 N7100 to the computer. Extract the zip file to get a .tar.md5 file within it
2) Download Odin v3.07 and extract the zip file
3) Power off the Note and place the device into Download Mode. Press and hold Volume Down, Home and Power buttons together. A warning message will be shown on the screen. Now press the Volume Up button to enter into Download Mode
4) Connect the phone to the computer using USB cable. A message saying 'Added' will appear under Odin's message box in the bottom left. Once the device is successfully connected to the computer, a COM port with a number in Yellow will be shown
5) Click the PDA button in Odin and select CF-Auto-Root-to3g-to3gxx-gtn7100.tar.md5
6) Ensure Auto Reboot and F.Reset Time checkboxes in Odin window are selected
7) Double-check everything and click the Start button in Odin to begin the flashing
8) Once the installation process completed, the phone will automatically reboot and soon a 'Pass' message with green background will appear in the extreme left box at the top of the Odin. Safely unplug the USB cable from the phone to disconnect it from the computer
Set up system language English (file: English.ini)
Welcome to Octopus Box Samsung software version 1.8.5
-----------------------------------------------------------------------------------
To connect GT-N7100 phone you have to perform the following steps:
1. Disconnect USB cable from phone.
2. Go to Menu->Settings->Developer options.
3. Turn on "USB Debugging" option.
4. When message is appear press "Yes".
5. Connect usb cable to phone.
6. Go to dial window.
7. Enter *#9090# number.
8. Set speed to 115200.
9. Go to dial window.
10. Enter "*#7284#" number.
11. Set "UART" radio button to "MODEM" value.
12. Set "USB" radio button to "PDA" value
13. Press "Read Info" in software.
-----------------------------------------------------------------------------------
Platform: Samsung Android
Selected port: COM180
Selected model: GT-N7100
Searching for a phone. Please wait...
Phone found.
Firmware compiled date: Thu Jan 24 17:06:13 KST 2013
Phone SN: RV1D21RD3NM
Android version: 4.1.2 (JZO54K)
Unlocking phone...
Phone is successfully unlocked
--------------------------------------------------------------------------------------