N8000 logo only done! via ( z3x jtag direct EMMC ) - step by step inside

[Eddie Sy]

only share about this problem

problem logo only

first try to flash odin load firmware N8000 success sa flashing but no luck

disassimble unit,connect all pinout jtag emmc

follow the pics

download files from support z3x jtag

EMMC pinout

need two supply for 2.4v/2.8v at 3.3v supply

see this

open the program z3x easy jtag emmc tool

load file N8000_Rom1_Main_Dump_BN.bin ( rom1 main user data )

write EMMC card

firts attemp error

write block verify error

just remove write protection to load this file

after that , write again rom 1 main,

done no error

rom2 ( boot partition 1 ) load this file N8000_Rom2_Boot_BN.bin
done!

rom3 ( boot partition 2 ) load this file N8000_Rom2_Boot_BN_2.bin
done

after all flash emmc

flash via odin

done

all is done

take note : dont forget to repair imei bcu'z its 04XXXXXXXXX