itong unit na ito ay naghahang po sa start up logo....
kaya need po nating reprogram, wala pong short at malinis po ang board...
para mareprogram natin kailanga nating pin out..
procedure;
open cyclone software...
click common and set usb for connection...
ilagay ang firmware...then click write flash image...
wait to finish to flash...
logs
sensya na po ala na yung unit....
nagalit bat daw kinukuhanan ng picture.....nagalit=))
kaya binigay ko na
)
salamat sa pag view:x
kaya need po nating reprogram, wala pong short at malinis po ang board...
para mareprogram natin kailanga nating pin out..
procedure;
open cyclone software...
click common and set usb for connection...
ilagay ang firmware...then click write flash image...
wait to finish to flash...
logs
PHP:
RPL backup thread finished, continuing...
Pre flash tasks finished, continuing...
Processing 3998CC21_rm827__03.04.mcusw (XGold2)...
Checking 3998CC21_rm827__03.04.mcusw...
Flash file sorted Okay.
1 file(s) embedded into image.
Booting X-Gold via USB...
If PC Can't detect any new device, probably your phone is erased. Do following if needed:
1. Eject battery
2. Eject cable
3. Insert cable
4. Insert battery
5. Press power-on
[Nokia USB Flashing Generic]: Port opened OK!
X-Gold: Ready, MCU ID Block: 1FB300020303010100FF
[PBL] : Ready
[EBL] : Mode CC
[EBL] : Quantum_Bootloader_10.49_M1S1
[EBL] : Ready
Setting Baudrate to 6500000bps...
Baudrate Accepted (6500000bps)
Flash Chip 0x00898982, Intel, Size: 64MBytes
Processing "rm827__03.04.mcusw_ebl_psi.fls"...
Sending Certificate...
Certificate Accepted
Erasing 0x40000000-0x4001FFFF...
Flashing at 0x40000000...
Flashed 131072 bytes OK
Erasing 0x40040000-0x4005FFFF...
Flashing at 0x40040000...
Flashed 131072 bytes OK
Erasing 0x40060000-0x4015FFFF...
Flashing at 0x40060000...
Flashed 1048576 bytes OK
Erasing 0x40280000-0x41BBFFFF...
Flashing at 0x40280000...
Flashed 25952256 bytes OK
Erasing 0x43E20000-0x43E5FFFF...
Processing AADC66F1_rm827__03.04.ppm_m2 (XGold2)...
Checking AADC66F1_rm827__03.04.ppm_m2...
Flash file sorted Okay.
1 file(s) embedded into image.
Processing "package_m2.ppm_ebl_psi.fls"...
Sending Certificate...
Certificate Accepted
Erasing 0x41BC0000-0x421BFFFF...
Flashing at 0x41BC0000...
Flashed 3164836 bytes OK
Processing B44A851C_rm827__03.04.image_m2_059N2R0 (XGold2)...
Checking B44A851C_rm827__03.04.image_m2_059N2R0...
Flash file sorted Okay.
1 file(s) embedded into image.
Processing "package_m2_059N2R0.image.fls"...
Sending Certificate...
Certificate Accepted
Erasing 0x421C0000-0x43E1FFFF...
Flashing at 0x421C0000...
Flashed 14548992 bytes OK
Erasing 0x43E60000-0x43F3FFFF...
All images processed OK! Processing post flash tasks...
Setting Factory Defaults...
[Nokia USB Flashing Generic]: Port opened OK!
[Nokia C2-00 USB Phonet]: Port opened OK!
[Nokia C2-00 USB Phonet]: Port opened OK!
[Nokia C2-00 USB Phonet]: Port opened OK!
[Nokia C2-00 USB Phonet]: Port opened OK!
[Nokia C2-00 USB Phonet]: Port opened OK!
Factory defaults OK
Reading info...
[Nokia C2-00 USB Phonet]: Port opened OK!
MCU Version V 03.04
MCU Date 20-04-12
Product RM-827 (Nokia RM-827)
Manufacturer (c) Nokia
IMEI 351970056379968
Mastercode 462467346
IMEI Spare 3A15790065739906
IMEI SV 3315790065739906F2000000
PPM V 03.04, 20-04-12, RM-827, (c) Nokia , M2
CNT Content: m2_059N2R0, V 03.04, 20-04-12, RM-827, (c) Nokia
PSN 98D7881AH
Product Code 059N3R7
Module Code 0205081
Basic Product Code 059K3X3
PSD 0000000000000000
LPSN 0
HW 1100
RFIC 68
LCD TPO
BT 19b5-22012
Asic 11
HW Signature 7EF29861FBBFC862
Simlock Server SIMLOCK SERVER
Simlock Key 0010100000000000
Simlock Profile 800000000004000B
Simlock Aux 000B0000
Simlock IMEI 00003519700563799600
Simlock Key Cnt 0
Simlock FBUS Cnt 0
Simlock [1,1] State: OPENED Type: MCC-MNC Data: FFFFFF
Simlock [1,2] State: OPENED Type: GID Data: FFFF
Simlock [1,3] State: OPENED Type: GID Data: FFFF
Simlock [1,4] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [1,5] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [2,1] State: OPENED Type: MCC-MNC Data: FFFFFF
Simlock [2,2] State: OPENED Type: GID Data: FFFF
Simlock [2,3] State: OPENED Type: GID Data: FFFF
Simlock [2,4] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [2,5] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [3,1] State: OPENED Type: MCC-MNC Data: FFFFFF
Simlock [3,2] State: OPENED Type: GID Data: FFFF
Simlock [3,3] State: OPENED Type: GID Data: FFFF
Simlock [3,4] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [3,5] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [4,1] State: OPENED Type: MCC-MNC Data: FFFFFF
Simlock [4,2] State: OPENED Type: GID Data: FFFF
Simlock [4,3] State: OPENED Type: GID Data: FFFF
Simlock [4,4] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [4,5] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [5,1] State: OPENED Type: MCC-MNC Data: FFFFFF
Simlock [5,2] State: OPENED Type: GID Data: FFFF
Simlock [5,3] State: OPENED Type: GID Data: FFFF
Simlock [5,4] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [5,5] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [6,1] State: OPENED Type: MCC-MNC Data: FFFFFF
Simlock [6,2] State: OPENED Type: GID Data: FFFF
Simlock [6,3] State: OPENED Type: GID Data: FFFF
Simlock [6,4] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [6,5] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [7,1] State: OPENED Type: MCC-MNC Data: FFFFFF
Simlock [7,2] State: OPENED Type: GID Data: FFFF
Simlock [7,3] State: OPENED Type: GID Data: FFFF
Simlock [7,4] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [7,5] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Read info thread finished, continuing...
Post flash tasks finished!
Flashing successfully finished!sensya na po ala na yung unit....
nagalit bat daw kinukuhanan ng picture.....nagalit=))
kaya binigay ko na
)salamat sa pag view:x
