nokia 110 usb pinout open pattern

[emomakie]

good day manga boss,,, gusto ko sana ibahagi sa inyo itong munting gawa ko

nokia 110 open pattern yong green na usb,,,

nong tanggap ko mula sa ibang shope,

sinubukan daw programin nang iba ngunit bigo sila,,, dahil nga may open pattern ito,,,,

ang nag sinimulan ko mag hukay nang pa kunti2x sa bord nito e may na pansin ako na bilog pag minamasdan mo mabuti,,,, at kiniskis ko itong dalawa na to,, sinubukan ko yong isa lang ang lagyan eh ayaw,,,, at nang sinubukan ko olit yng isa pa ganon parin,,,,,,napag isip2x ko na sabayin itong dalawa na to

aba gumana nga,,,,at nang natapos sinubukan ko ito,,,,

at done na po,,, ito po yng info nya po,,,card found: A1B5CCE8
registered to: MUKESH RAJ

Connect phone on selected interface...

Core : v1.51 , FlashEngine : v1.8

Selected FlashSettings : FullFlash
Check FlashFiles, Please, wait...

Files Set for Flashing :
MCU : rm827__03.04.mcusw
PPM : rm827__03.04.ppm_m1
CNT : rm827__03.04.image_m1_059N416
Flashing phone now...
Check files done...
-> SWversion check skipped : Dead mode selected
Dead Mode is Selected
Waiting for USB device...

-> If Windows say "Unrecognized device" - just reinsert battery
-> If flashing freeze - reinsert cable and try again
--- Press phone's power button or insert charger! ---

-> Phone not found..
-> Boot fail...
Flashing failed...

Core : v1.51 , FlashEngine : v1.8

Selected FlashSettings : FullFlash
Check FlashFiles, Please, wait...

Files Set for Flashing :
MCU : rm827__03.04.mcusw
PPM : rm827__03.04.ppm_m1
CNT : rm827__03.04.image_m1_059N416
Flashing phone now...
Check files done...
-> SWversion check skipped : Dead mode selected
Dead Mode is Selected
Waiting for USB device...

-> If Windows say "Unrecognized device" - just reinsert battery
-> If flashing freeze - reinsert cable and try again
--- Press phone's power button or insert charger! ---

-> Phone not found..
-> Boot fail...
Flashing failed...

Core : v1.51 , FlashEngine : v1.8

Selected FlashSettings : FullFlash
Check FlashFiles, Please, wait...

Files Set for Flashing :
MCU : rm827__03.04.mcusw
PPM : rm827__03.04.ppm_m1
CNT : rm827__03.04.image_m1_059N416
Flashing phone now...
Check files done...
-> SWversion check skipped : Dead mode selected
Dead Mode is Selected
Waiting for USB device...

-> If Windows say "Unrecognized device" - just reinsert battery
-> If flashing freeze - reinsert cable and try again
--- Press phone's power button or insert charger! ---

-> Phone not found..
-> Boot fail...
Flashing failed...

Core : v1.51 , FlashEngine : v1.8

Selected FlashSettings : FullFlash
Check FlashFiles, Please, wait...

Files Set for Flashing :
MCU : rm827__03.04.mcusw
PPM : rm827__03.04.ppm_m1
CNT : rm827__03.04.image_m1_059N416
Flashing phone now...
Check files done...
-> SWversion check skipped : Dead mode selected
Dead Mode is Selected
Waiting for USB device...

-> If Windows say "Unrecognized device" - just reinsert battery
-> If flashing freeze - reinsert cable and try again
--- Press phone's power button or insert charger! ---

-> Phone not found..
-> Boot fail...
Flashing failed...

Core : v1.51 , FlashEngine : v1.8

Selected FlashSettings : FullFlash
Check FlashFiles, Please, wait...

Files Set for Flashing :
MCU : rm827__03.04.mcusw
PPM : rm827__03.04.ppm_m1
CNT : rm827__03.04.image_m1_059N416
Flashing phone now...
Check files done...
-> SWversion check skipped : Dead mode selected
Dead Mode is Selected
Waiting for USB device...

-> If Windows say "Unrecognized device" - just reinsert battery
-> If flashing freeze - reinsert cable and try again
--- Press phone's power button or insert charger! ---

Connection opened successfully
DBG : F00A1FB300020303010100FF
CPUID : XGOLD 213
2nd boot Ok, 01
2nd ready, AA
Sending Algo
Algo sent Ok
BL : Quantum_Bootloader_10.49_M1S1
Speed accepted, use 6.500.000
FLASHID : 89008289
FLIC conf set, RST set
Boot done!
Backup enabled, will read all certificates

Reading CCC
Reading HWC
Reading NPC

IMEI 1 : 356687059288385
IMEI 2 : 356687059288393
PCcode : †éQJFÕÂ￾

NPC Certificate saved...
CCC Certificate saved...
HWC Certificate saved...

RPL saved : D:\cellphone tools\Cellphone Installer\best new\Backup\Cert\356687059288385_356687059288393_XG 213_CRT.rpl


===Flashing [MCU]===
File : rm827__03.04.mcusw
Image : rm827__03.04.mcusw_ebl_psi.fls
Cert block found, sending....
Cert sent
Found 5 region(s)
Processing Region 1/5
Erase , Start : 0x40000000 , Len : 0x00020000
Erasing, wait ...
Erase done, time : 00:00:00
Write , Start : 0x40000000 , Len : 0x00020000
Flashing , wait ...
Region flash done, time : 00:00:00
Processing Region 2/5
Erase , Start : 0x40040000 , Len : 0x00020000
Erasing, wait ...
Erase done, time : 00:00:00
Write , Start : 0x40040000 , Len : 0x00020000
Flashing , wait ...
Region flash done, time : 00:00:00
Processing Region 3/5
Erase , Start : 0x40060000 , Len : 0x00100000
Erasing, wait ...
Erase done, time : 00:00:04
Write , Start : 0x40060000 , Len : 0x00100000
Flashing , wait ...
Region flash done, time : 00:00:01
Processing Region 4/5
Erase , Start : 0x40280000 , Len : 0x01940000
Erasing, wait ...
Erase done, time : 00:02:00
Write , Start : 0x40280000 , Len : 0x018C0000
Flashing , wait ...
Region flash done, time : 00:00:48
Processing Region 5/5
Erase , Start : 0x43E20000 , Len : 0x00040000
Erasing, wait ...
Erase done, time : 00:00:00
No write data, skip

===Flashing [PPM]===
File : rm827__03.04.ppm_m1
Image : package_m1.ppm_ebl_psi.fls
Cert block found, sending....
Cert sent
Found 1 region(s)
Processing Region 1/1
Erase , Start : 0x41BC0000 , Len : 0x00600000
Erasing, wait ...
Erase done, time : 00:00:23
Write , Start : 0x41BC0000 , Len : 0x003DF0A4
Flashing , wait ...
Region flash done, time : 00:00:05

===Flashing [CNT]===
File : rm827__03.04.image_m1_059N416
Image : package_m1_059N416.image.fls
Cert block found, sending....
Cert sent
Found 2 region(s)
Processing Region 1/2
Erase , Start : 0x421C0000 , Len : 0x01C60000
Erasing, wait ...
Erase done, time : 00:03:54
Write , Start : 0x421C0000 , Len : 0x00E40000
Flashing , wait ...
Region flash done, time : 00:00:29
Processing Region 2/2
Erase , Start : 0x43E60000 , Len : 0x000E0000
Erasing, wait ...
Erase done, time : 00:00:07
No write data, skip

Flashing done!
Total flash time : 00:07:57
Reboot phone now...

- > AfterFlash Failed! Reason : Downgrade try or HW Error
Anyway - try reinsert battery and PowerUp phone manualy

Connect phone on selected interface...

Done!
Connect phone on selected interface...


Elapsed: 00:10:08
Connect phone on selected interface...

sana maka tulong,,,,

 

[prince vhanz]

Buti boss nadali mo,,,,,,,

 

[emomakie]

oo nga boss eh,,,, atlis makatulong dn naman sa atin balang araw

 

[THOR21]

congrats po boss?

buti na lang nadale mo pa?