Nokia 200 hang & whitescreen done by hawk!!!

[Yongitechz]

UNIT:
Nokia 200_rm-761


STATUS:
Hang & Whitscreen

TOOLS:
Hawk,5130 usb cable,firmware rm-761_v10.58


ACTION TAKEN:
Reprogram


PROCEDURE:
1.Select DCT4 tab
2.select product C1-01 usb,kc hindi cya suported sa hawk
3.Load firmwares
4.select usb sa interface
5.Tick write flash
6.wait till done..


LOGS:

IF_USB: XGOLD213
IF_SBL: XGOLD213, Ok
IF_EBL: Quantum_Bootloader_10.46_M1S1.10.46, Mode: CC
FL_ID : 89008289, Intel 38F50xxLOY3 512Mb
MCU FLASH BUNDLE: 06DF94BB_rm761__10.58.mcusw
Flash File: rm761__10.58.mcusw_ebl_psi.fls
Erase Area: 0x40000000 - 0x4001FFFE, Erased: 00:00
Write Area: 0x40000000 - 0x4001FFFE, Written: 00:00
Erase Area: 0x40040000 - 0x4005FFFE, Erased: 00:00
Write Area: 0x40040000 - 0x4005FFFE, Written: 00:00
Erase Area: 0x40060000 - 0x4015FFFE, Erased: 00:03
Write Area: 0x40060000 - 0x4015FFFE, Written: 00:01
Erase Area: 0x40280000 - 0x41A7FFFE, Erased: 01:28
Write Area: 0x40280000 - 0x41A7FFFE, Written: 00:26
Erase Area: 0x43E20000 - 0x43E5FFFE, Erased: 00:00
PPM FLASH BUNDLE: 0658C77E_rm761__10.58.ppm_q
Flash File: package_q.ppm_ebl_psi.fls
Erase Area: 0x41A80000 - 0x421BFFFE, Erased: 00:19
Write Area: 0x41A80000 - 0x4209FF06, Written: 00:06
CNT FLASH BUNDLE: 331B8C1C_rm761__10.58.image_q_059J4V0_001
Flash File: package_q_059J4V0.image.fls
Erase Area: 0x421C0000 - 0x43E1FFFE, Erased: 02:41
Write Area: 0x421C0000 - 0x4303FFFE, Written: 00:15
Erase Area: 0x43E60000 - 0x43F3FFFE, Erased: 00:04
Flashing Done: 05:40
ShutDown Done

SCREENSHOT:

Here's my finish product:

FOr reference lang po sana makatulong...​

:dances