nokia 200 nokia only then blinking done by infinity free software...

[credit_tech]

<article>

good morning po mga idol ko dito sa tinapay share ko lang po itong bwenamano ko

MODEL: NOKIA 200

PROBLEM: NOKIA ONLY THEN BLINKING

TOOLS: NOKIA CA-101 USB DATA CABLE
AND INFINITY FREE SOFTWARE

GINAWA KO FULL FLASH KO NA LANG ANG PHONE...








card found: A1B5CCE8
registered to: CycloneBox

Connect phone on selected interface...

Core : v1.51 , FlashEngine : v1.8

Selected FlashSettings : *********
Check FlashFiles, Please, wait...

Files Set for Flashing :
MCU : rm761__11.56.mcusw
PPM : rm761__11.56.ppm_a1
CNT : rm761__11.56.image_a1_059J9B3_006
Flashing phone now...
Check files done...
-> SWversion check skipped : Dead mode selected
Dead Mode is Selected
Waiting for USB device...

-> If Windows say "Unrecognized device" - just reinsert battery
-> If flashing freeze - reinsert cable and try again
--- Press phone's power button or insert charger! ---

Connection opened successfully
DBG : F00A1FB300020303010100FF
CPUID : XGOLD 213
2nd boot Ok, 01
2nd ready, AA
Sending Algo
Algo sent Ok
BL : Quantum_Bootloader_10.46_M1S1
Speed accepted, use 6.500.000
FLASHID : 89008289
FLIC conf set, RST set
Boot done!
Backup enabled, will read all certificates

Reading CCC
Reading HWC
Reading NPC

IMEI 1 : 358259041911926
IMEI 2 : 358259041911934
PCcode : 059J569

NPC Certificate saved...
CCC Certificate saved...
HWC Certificate saved...

RPL saved : D:\SOFTWARE\infinity\Backup\Cert\358259041911926_358259041911934_XG213_CRT.rpl


===Flashing [MCU]===
File : rm761__11.56.mcusw
Image : rm761__11.56.mcusw_ebl_psi.fls
Cert block found, sending....
Cert sent
Found 5 region(s)
Processing Region 1/5
Erase , Start : 0x40000000 , Len : 0x00020000
Erasing, wait ...
Erase done, time : 00:00:00
Write , Start : 0x40000000 , Len : 0x00020000
Flashing , wait ...
Region flash done, time : 00:00:00
Processing Region 2/5
Erase , Start : 0x40040000 , Len : 0x00020000
Erasing, wait ...
Erase done, time : 00:00:01
Write , Start : 0x40040000 , Len : 0x00020000
Flashing , wait ...
Region flash done, time : 00:00:00
Processing Region 3/5
Erase , Start : 0x40060000 , Len : 0x00100000
Erasing, wait ...
Erase done, time : 00:00:07
Write , Start : 0x40060000 , Len : 0x00100000
Flashing , wait ...
Region flash done, time : 00:00:01
Processing Region 4/5
Erase , Start : 0x40280000 , Len : 0x01800000
Erasing, wait ...
Erase done, time : 00:01:42
Write , Start : 0x40280000 , Len : 0x01800000
Flashing , wait ...
Region flash done, time : 00:00:33
Processing Region 5/5
Erase , Start : 0x43E20000 , Len : 0x00040000
Erasing, wait ...
Erase done, time : 00:00:00
No write data, skip

===Flashing [PPM]===
File : rm761__11.56.ppm_a1
Image : package_a1.ppm_ebl_psi.fls
Cert block found, sending....
Cert sent
Found 1 region(s)
Processing Region 1/1
Erase , Start : 0x41A80000 , Len : 0x00740000
Erasing, wait ...
Erase done, time : 00:00:24
Write , Start : 0x41A80000 , Len : 0x00598640
Flashing , wait ...
Region flash done, time : 00:00:06

===Flashing [CNT]===
File : rm761__11.56.image_a1_059J9B3_006
Image : package_a1_059J9B3.image.fls
Cert block found, sending....
Cert sent
Found 2 region(s)
Processing Region 1/2
Erase , Start : 0x421C0000 , Len : 0x01C60000
Erasing, wait ...
Erase done, time : 00:02:50
Write , Start : 0x421C0000 , Len : 0x00E00000
Flashing , wait ...
Region flash done, time : 00:00:17
Processing Region 2/2
Erase , Start : 0x43E60000 , Len : 0x000E0000
Erasing, wait ...
Erase done, time : 00:00:06
No write data, skip

Flashing done!
Total flash time : 00:06:13
Reboot phone now...

Reading Phone Info....
Connected phone - Nokia 200
Software Info: V 11.56 26-03-12 RM-761 (c) Nokia
IMEI: 358259041911926
PPM version : V 11.56 26-03-12 RM-761 (c) Nokia A1
Product code: 059J5N3
Checking...
SimLock status : SimLock is Ok
Security status : Security is Ok
Read Info Done!
Settings After Flash Defaults...
ProductTuneSet...OK!
SwUpgradeSet...OK!
Checking User Certificates...
Total - 42 certs
Data exist, skip certificate repair...
Battery voltage is enough for start
Set phone to Normal mode...

AfterFlash operations done ;D
Done!
Connect phone on selected interface...


Resetting selected items...
Check phone mode...
Phone in Normal mode
Seting Test mode... wait...
Test mode set
Settings Full Factory Defaults...
Set OK!
Settings Software Upgrade Defaults...
Set OK!
Settings Service Centre Defaults...
Set OK!
Settings Production Tune Defaults...
Set OK!
Settings User Data Defaults...
Set OK!
Settings Leave Factory defaults...
Set OK!

Elapsed: 00:00:18


Elapsed: 00:06:56
Connect phone on selected interface...

Phone found!
Series 40 Device detected!
read info... - Ok

ITO NA PO FINISH PRODUCT KO...



MAY BWENAMANO NA RIN SA WAKAS....

​

</article>