What's new
PinoyTechnician

This is a sample guest message. Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!

nokia 301 no power done by flashing with tested firmware inside

jerrenn

Registered
Joined
May 27, 2015
Messages
393
Reaction score
152
Points
31
Location
Bulacan
procedure:
install nokia driver if needed
open atf software
select exact model
go to flashing tab
browse the three file MCU,PPM,CNT
hit flash
insert usb cable sa phone with out battery sabay insert ng battery
antayin lang matapos ang flashing
done
cnxa na wala actual pic ng unit wala akung mejo malinaw na camera ngayun
1zn36vp.png

tested firmware:http://www.4shared.com/rar/7Koo9Aawba/rm-839_tested_by_jerrenn.html
HTML:
Number of Image Files: 3

Processing Image File : 
 84B50E78_rm839__09.04.mcusw
Processing Image File : 
 4647B149_rm839__09.04.ppm_s1
Processing Image File : 
 16BFA2DD_rm839__09.04.image_s1_059T3S3


AUTO SELECTED DEAD USB FLASHING...

If Phone Booting does not Start in 5 Seconds,
Then Perform Steps 1, 2, and 3...

1. Remove USB Cable and Battery...
2. Connect USB Cable.
3. Connect Battery.

***** IF PHONE STARTS CHARGING OR DOES NOT BOOT *****
******* REMOVE BATTERY AND PUT IT BACK AGAIN. *******
======================================================


Infineon Boot: F01650A9070100030101E000180910042D344AFC28B4FFFF
CPU Type: Intel XG618

         <<<< Connect Battery Now >>>>

Sending PBL...
PBL Successfully Sent...
Sending SBL...
SBL Successfully Sent...
Flash Chip Manufacturer: STMicroelectronics
Flash Boot Successful...
Unique Data: E000180910042D34
Original Product Code: 059S168
Reading : CCC... OK!
Reading : HWC... OK!
Reading : NPC... OK!
RPL Backup was Successful...
 Plain RPL saved to:
 C:\AdvanceBox Turbo Flasher\Nokia\Backup\355516058477007\355516058477007_25616.rpl

Current File    : 84B50E78_rm839__09.04.mcusw
Number of Images: 8
psi_flash_unsigned.fls
slb_signed.fls
main_toc_signed.fls
rm839__09.04.mcusw_signed_mcusw.fls
swap_signed.fls s
dynsw.fls
aeneas_signed.fls s
fota_signed.fls s
Processing Data Block 0x00
Erase Block: 0x00090000~0x000A0FAE
Start Erasing...
Erasing Please Wait...
Block Erase Done...
Start Writing...
Finalizing...
Data Block Write Done...
Processing Data Block 0x01
Erase Block: 0x60000000~0x6003FFFE
Start Erasing...
Erasing Please Wait...
Block Erase Done...
Start Writing...
Finalizing...
Data Block Write Done...
Processing Data Block 0x02
Erase Block: 0x60040000~0x600403FE
Start Erasing...
Erasing Please Wait...
Block Erase Done...
Start Writing...
Finalizing...
Data Block Write Done...
Processing Data Block 0x03
Erase Block: 0x62E00000~0x63D0D4CA
Start Erasing...
Erasing Please Wait...
Block Erase Done...
Start Writing...
Finalizing...
Data Block Write Done...
Erase Block: 0xFFF00000~0xFFF7FFFE
Start Erasing...
Erasing Please Wait...
Block Erase Done...
Processing Data Block 0x04
Erase Block: 0x80000000~0x80C2BCCE
Start Erasing...
Erasing Please Wait...
Block Erase Done...
Start Writing...
Finalizing...
Data Block Write Done...
Processing Data Block 0x05
Erase Block: 0x62080000~0x620C3FFE
Start Erasing...
Erasing Please Wait...
Block Erase Done...
Start Writing...
Finalizing...
Data Block Write Done...
Processing Data Block 0x06
Erase Block: 0x63F79C00~0x63FC046E
Start Erasing...
Erasing Please Wait...
Block Erase Done...
Start Writing...
Finalizing...
Data Block Write Done...
Processing Data Block 0x07
Erase Block: 0x61F00004~0x62049892
Start Erasing...
Erasing Please Wait...
Block Erase Done...
Start Writing...
Finalizing...
Data Block Write Done...


Current File    : 4647B149_rm839__09.04.ppm_s1
Number of Images: 1
package_s1.ppm_ebl_psi.fls
Processing Data Block 0x00
Erase Block: 0x80F00000~0x81603476
Start Erasing...
Erasing Please Wait...
Block Erase Done...
Start Writing...
Finalizing...
Data Block Write Done...


Current File    : 16BFA2DD_rm839__09.04.image_s1_059T3S3
Number of Images: 1
package_s1_059T3S3.image.fls
Processing Data Block 0x00
Erase Block: 0xA1000000~0xA2B991FE
Start Erasing...
Erasing Please Wait...
Block Erase Done...
Start Writing...
Finalizing...
Data Block Write Done...
Erase Block: 0xAE000000~0xAE2FFFFE
Start Erasing...
Erasing Please Wait...
Block Erase Done...

Total Flashing Time (Erase + Flashing) : 00:00:14
(Booting time is NOT Included)

Waiting for Phone to Start-Up..(Max 150 seconds)



Scanning USB Ports...

================================================
             Basic Phone Information             
================================================
MCU Version: V 09.04 03-12-13 RM-839 (c) Nokia            
IMEI Plain : 355516058477007
IMEI Spare : A355516058477000
IMEI SV    : 33555160584770023F
IMEI (2nd) : 355516058477015
IMEI Spare : A355516058477010
IMEI SV    : 33555160584770123F
Phone Model: Nokia 301 Dual SIM
Category   : Phone
Phone Type : RM-839

================================================
            Extended Phone Information           
================================================
Product Serial Number: 0D48591BH
Product Code         : 059S168
Module Code          : 0205266
Basic Production Code: 059P5R3
Long Production SN   : 0
PPM SW Version       : V 09.04 03-12-13 RM-839 (c) Nokia             S1
BT MCM Version       : 19e2-4702G12
ADSP Version         : PMU_MAXIM8939B
MCU SW Version       : V 09.04 03-12-13 RM-839 (c) Nokia
HW Version           : 1000
UEM Version          : 3
UPP Version          : MFR:0x20,DEV:0x40,REV:0x131
RFIC Version         : 152
LCD Version          : TPO
Camera               : 01035602006004
Content Pack Version : Content: s1_059T3S3 V 09.04 10-12-13 RM-839 (c) Nokia
AHNE Version         : 13
RETU Version         : PMU_MAXIM8939B
Bluetooth ID         : F4:F5:A5:74:B4:7F
CS Type              : GSM850, GSM900, GSM1800, GSM1900, WCDMA I, WCDMA VIII

  ********** SIMLOCK INFO  ********** 
CONFIG_DATA  : 0010100000000000
PROFILE_BITS : 800000000004000B
ASIC         : 11
PROVIDER     : Default Test Operator
LOCK COUNTERS: KEYPRESS 0/3,  FBUS 0/10

   Block [1]  1:Open 2:Open 3:Open 4:Open 5:Open
   Block [2]  1:Open 2:Open 3:Open 4:Open 5:Open
   Block [3]  1:Open 2:Open 3:Open 4:Open 5:Open
   Block [4]  1:Open 2:Open 3:Open 4:Open 5:Open
   Block [5]  1:Open 2:Open 3:Open 4:Open 5:Open
   Block [6]  1:Open 2:Open 3:Open 4:Open 5:Open
   Block [7]  1:Open 2:Open 3:Open 4:Open 5:Open

SIMLOCK_TYPE             : PA_SIMLOC30 (20-digit NCK)
SIMLOCK_TEST             : PASSED
SECURITY_TEST           : PASSED
SECURITY_CODE          : 12345
PHONE_MODE              : TEST
                                                
================================================
          Dynamic Camera Configuration          
================================================
DCC ID  : 01035602
DCC Ver: 006004
Status   : OK


Make sure you have installed the
COMPLETE Flash Package for this Phone...

Goto "Settings" --> "Nokia Settings" and verify that
the Folder where you installed your Flash Files are
in the "PRODUCT PATH TO SCAN" List...

Phone is not Connected OR it is not in the
Required Mode...
 Reboot the Phone and Enable "PC Suite" Mode
salamat sa pag view
 
procedure:
Install nokia driver if needed
open atf software
select exact model
go to flashing tab
browse the three file mcu,ppm,cnt
hit flash
insert usb cable sa phone with out battery sabay insert ng battery
antayin lang matapos ang flashing
done
cnxa na wala actual pic ng unit wala akung mejo malinaw na camera ngayun
1zn36vp.png

tested firmware:http://www.4shared.com/rar/7koo9aawba/rm-839_tested_by_jerrenn.html
HTML:
number of image files: 3

processing image file : 
 84b50e78_rm839__09.04.mcusw
processing image file : 
 4647b149_rm839__09.04.ppm_s1
processing image file : 
 16bfa2dd_rm839__09.04.image_s1_059t3s3


auto selected dead usb flashing...

If phone booting does not start in 5 seconds,
then perform steps 1, 2, and 3...

1. Remove usb cable and battery...
2. Connect usb cable.
3. Connect battery.

***** if phone starts charging or does not boot *****
******* remove battery and put it back again. *******
======================================================


infineon boot: F01650a9070100030101e000180910042d344afc28b4ffff
cpu type: Intel xg618

         <<<< connect battery now >>>>

sending pbl...
Pbl successfully sent...
Sending sbl...
Sbl successfully sent...
Flash chip manufacturer: Stmicroelectronics
flash boot successful...
Unique data: E000180910042d34
original product code: 059s168
reading : Ccc... Ok!
Reading : Hwc... Ok!
Reading : Npc... Ok!
Rpl backup was successful...
 Plain rpl saved to:
 C:\advancebox turbo flasher\nokia\backup\355516058477007\355516058477007_25616.rpl

current file    : 84b50e78_rm839__09.04.mcusw
number of images: 8
psi_flash_unsigned.fls
slb_signed.fls
main_toc_signed.fls
rm839__09.04.mcusw_signed_mcusw.fls
swap_signed.fls s
dynsw.fls
aeneas_signed.fls s
fota_signed.fls s
processing data block 0x00
erase block: 0x00090000~0x000a0fae
start erasing...
Erasing please wait...
Block erase done...
Start writing...
Finalizing...
Data block write done...
Processing data block 0x01
erase block: 0x60000000~0x6003fffe
start erasing...
Erasing please wait...
Block erase done...
Start writing...
Finalizing...
Data block write done...
Processing data block 0x02
erase block: 0x60040000~0x600403fe
start erasing...
Erasing please wait...
Block erase done...
Start writing...
Finalizing...
Data block write done...
Processing data block 0x03
erase block: 0x62e00000~0x63d0d4ca
start erasing...
Erasing please wait...
Block erase done...
Start writing...
Finalizing...
Data block write done...
Erase block: 0xfff00000~0xfff7fffe
start erasing...
Erasing please wait...
Block erase done...
Processing data block 0x04
erase block: 0x80000000~0x80c2bcce
start erasing...
Erasing please wait...
Block erase done...
Start writing...
Finalizing...
Data block write done...
Processing data block 0x05
erase block: 0x62080000~0x620c3ffe
start erasing...
Erasing please wait...
Block erase done...
Start writing...
Finalizing...
Data block write done...
Processing data block 0x06
erase block: 0x63f79c00~0x63fc046e
start erasing...
Erasing please wait...
Block erase done...
Start writing...
Finalizing...
Data block write done...
Processing data block 0x07
erase block: 0x61f00004~0x62049892
start erasing...
Erasing please wait...
Block erase done...
Start writing...
Finalizing...
Data block write done...


Current file    : 4647b149_rm839__09.04.ppm_s1
number of images: 1
package_s1.ppm_ebl_psi.fls
processing data block 0x00
erase block: 0x80f00000~0x81603476
start erasing...
Erasing please wait...
Block erase done...
Start writing...
Finalizing...
Data block write done...


Current file    : 16bfa2dd_rm839__09.04.image_s1_059t3s3
number of images: 1
package_s1_059t3s3.image.fls
processing data block 0x00
erase block: 0xa1000000~0xa2b991fe
start erasing...
Erasing please wait...
Block erase done...
Start writing...
Finalizing...
Data block write done...
Erase block: 0xae000000~0xae2ffffe
start erasing...
Erasing please wait...
Block erase done...

Total flashing time (erase + flashing) : 00:00:14
(booting time is not included)

waiting for phone to start-up..(max 150 seconds)



scanning usb ports...

================================================
             basic phone information             
================================================
mcu version: V 09.04 03-12-13 rm-839 (c) nokia            
imei plain : 355516058477007
imei spare : A355516058477000
imei sv    : 33555160584770023f
imei (2nd) : 355516058477015
imei spare : A355516058477010
imei sv    : 33555160584770123f
phone model: Nokia 301 dual sim
category   : Phone
phone type : Rm-839

================================================
            extended phone information           
================================================
product serial number: 0d48591bh
product code         : 059s168
module code          : 0205266
basic production code: 059p5r3
long production sn   : 0
ppm sw version       : V 09.04 03-12-13 rm-839 (c) nokia             s1
bt mcm version       : 19e2-4702g12
adsp version         : Pmu_maxim8939b
mcu sw version       : V 09.04 03-12-13 rm-839 (c) nokia
hw version           : 1000
uem version          : 3
upp version          : Mfr:0x20,dev:0x40,rev:0x131
rfic version         : 152
lcd version          : Tpo
camera               : 01035602006004
content pack version : Content: S1_059t3s3 v 09.04 10-12-13 rm-839 (c) nokia
ahne version         : 13
retu version         : Pmu_maxim8939b
bluetooth id         : F4:f5:a5:74:b4:7f
cs type              : Gsm850, gsm900, gsm1800, gsm1900, wcdma i, wcdma viii

  ********** simlock info  ********** 
config_data  : 0010100000000000
profile_bits : 800000000004000b
asic         : 11
provider     : Default test operator
lock counters: Keypress 0/3,  fbus 0/10

   block [1]  1:open 2:open 3:open 4:open 5:open
   block [2]  1:open 2:open 3:open 4:open 5:open
   block [3]  1:open 2:open 3:open 4:open 5:open
   block [4]  1:open 2:open 3:open 4:open 5:open
   block [5]  1:open 2:open 3:open 4:open 5:open
   block [6]  1:open 2:open 3:open 4:open 5:open
   block [7]  1:open 2:open 3:open 4:open 5:open

simlock_type             : Pa_simloc30 (20-digit nck)
simlock_test             : Passed
security_test           : Passed
security_code          : 12345
phone_mode              : Test
                                                
================================================
          dynamic camera configuration          
================================================
dcc id  : 01035602
dcc ver: 006004
status   : Ok


make sure you have installed the
complete flash package for this phone...

Goto "settings" --> "nokia settings" and verify that
the folder where you installed your flash files are
in the "product path to scan" list...

Phone is not connected or it is not in the
required mode...
 Reboot the phone and enable "pc suite" mode
salamat sa pag view



goodjab salamat/:d:d:d
 
Back
Top