Nokia c3 security problem done " via free soft"
PROBLEM: SECURITY CODE " Nakalimutan ni tumer
( 
"SOLUTION: FLASHING
PROCEDURE
DOWNLOAD NYO MUNA ANG MGA ITO
InfinityBox_FREE_BEST_v1.92
FIRMWARE RM-614
OK FLASHING NA
SUNDAN NYO LANG YUNG NASA PICTURE KUNG PANO ILOAD ANG FIRMWA AT KUNG ANO ANG DAPAT I CHECK
NOTE: tanggal kabit ang baterry saka salpak sa computer wait hanggang matapos ang flashing, pag may nakita na kayu ok
it means tapos na ang flashing then tanggal kabit ang battery on ang phone smile na unit ok =))><)
LOGS
card found: A1B5CCE8
registered to: CycloneBox
Connect phone on selected interface...
Core : v1.51 , FlashEngine : v1.8
Selected FlashSettings : Manual
Check FlashFiles, Please, wait...
-> Flash Files are NOT selected!
You can Select:
S40 : Any, but MCU need present in filelist
S60 : Any, but CORE/MCU need present in filelist
S60 APE : MCU+PPM, MCU+PPM+CNT
Core : v1.51 , FlashEngine : v1.8
Selected FlashSettings : Manual
Check FlashFiles, Please, wait...
Files Set for Flashing :
MCU : B4019E25_rm614__08.71.mcusw
PPM : 71C9C990_rm614__08.71.ppm_mh1
CNT : C738BCE0_rm614__08.71.image_mh1_059G792
Flashing phone now...
Check files done...
-> SWversion check skipped : Dead mode selected
Dead Mode is Selected
Waiting for USB device...
--- Insert cable and charger or press phone's power button! ---
-> Phone not found..
-> Boot fail...
Flashing failed...
Core : v1.51 , FlashEngine : v1.8
Selected FlashSettings : Manual
Check FlashFiles, Please, wait...
Files Set for Flashing :
MCU : B4019E25_rm614__08.71.mcusw
PPM : 71C9C990_rm614__08.71.ppm_mh1
CNT : C738BCE0_rm614__08.71.image_mh1_059G792
Flashing phone now...
Check files done...
-> SWversion check skipped : Dead mode selected
Dead Mode is Selected
Waiting for USB device...
--- Insert cable and charger or press phone's power button! ---
Connection opened successfully
Waiting for communication response...
BootRom : 1st boot ok
ASIC ID: 000000000000000022000509200C0000
CPU ID : BroadCom 21351 , Features : Dead-Test, USBRPL, FullUSB
EM0 ID: 00005361
PUBLIC ID: 0000000000D084EA5AC8F2848FF6B9AB7AFD4745
ASIC MODE ID: 00
ROOT KEY HASH: 1B0D74C532CA1C6133940C740E8C786E
ROM ID: DE56D582BDDE7A3A
Use BCM21351_usb2nd.fg , Rev : 2.1 Ver : 12.8.0
Processing RAWLOADER...
FLIC : 003000EC
Req : XSR 1.6
Use BCM21351_XSR16_usbalg.fg , Rev : 2.1 Ver : 12.8.0
Processing PASUBTOC ...
Processing ALG ...
Boot Done!
TIME : Boot time : 00:00:01
Reopening the connection...
Waiting for response: 30
ADL: Check mode
Select ASIC [C900]
PAPUBkeys : 697F747788AD72E77DB3BC8DFEC0C28DA22F16D8
ADL: phone is in flash mode
Backup enabled, will read all certificates...
Reading NPC certificate...
IMEI : 355384041147199
Reading CCC certificate...
Reading HWC certificate...
Reading R&D certificate...
Reading VARIANT certificate...
Reading PARTNERC certificate...
Reading MDM_KEYS certificate...
Cert Read done!
NPC Certificate saved...
CCC Certificate saved...
HWC Certificate saved...
RPL saved : C:\Users\hp\Desktop\â„¢\InfinityBox_FREE_BEST_v1.92\InfinityBox_FREE_BEST_v1.92\Backup\Cert\355384041147199_CRT_2nd.rpl
===Flashing [MCU]===
Erase : Processing B4019E25_rm614__08.71.mcusw
Partitioning....
Partitioning Ok...
Erasing....
Erasing Ok...
TIME : Erase time : 00:00:00
Write : Processing B4019E25_rm614__08.71.mcusw
CMT: Writing Hash CERT [KEYS]
CMT: Writing Hash CERT [ADA]
CMT: Writing Hash CERT [PRIMAPP]
CMT: Writing Hash CERT [RAP3NAND]
CMT: Writing Hash CERT [PASUBTOC]
CMT: Writing Hash CERT [PAPUBKEYS]
CMT: Writing Hash CERT [UPDAPP]
CMT: Writing Hash CERT [MCUSW]
CMT: Writing Hash CERT [MCUSW1]
CMT: Writing Hash CERT [GENIO_INIT]
CMT: Writing Hash CERT [ISA+DYNSW]
Total writen 528 blocks
TIME : Write time : 00:00:05
MCU Write done
ADL: Request programm status
NAND status : 00000001 / 00000001 / 00000000
===Flashing [PPM]===
Erase : Processing 71C9C990_rm614__08.71.ppm_mh1
Partitioning....
Partitioning Ok...
Erasing....
Erasing Ok...
TIME : Erase time : 00:00:00
Write : Processing 71C9C990_rm614__08.71.ppm_mh1
Total writen 120 blocks
TIME : Write time : 00:00:01
PPM Write done
ADL: Request programm status
NAND status : 00000001 / 00000001 / 00000000
===Flashing [CNT]===
Erase : Processing C738BCE0_rm614__08.71.image_mh1_059G792
Partitioning....
Partitioning Ok...
Erasing....
Erasing Ok...
TIME : Erase time : 00:00:01
Write : Processing C738BCE0_rm614__08.71.image_mh1_059G792
Total writen 248 blocks
TIME : Write time : 00:00:02
CNT Write done
ADL: Request programm status
NAND status : 00000001 / 00000001 / 00000000
ADL: Close_Session
Content: 000300000000010000000100000000
ADL: Reboot
Flashing done!
Total flash time : 00:00:11
Reboot phone now...
Reading Phone Info....
Connected phone - C3-00
Software Info: V 08.71 15-11-11 RM-614 (c) Nokia
IMEI: 355384041147199
PPM version : V 08.71 15-11-11 RM-614 (c) Nokia MH1
Product code: 059C4Q2
Checking...
SimLock status : SimLock is Ok
Security status : Security is Ok
Read Info Done!
Settings After Flash Defaults...
ProductTuneSet...OK!
SwUpgradeSet...OK!
Checking User Certificates...
Total - 39 certs
Data exist, skip certificate repair...
Battery voltage is enough for start
AfterFlash operations done ;D
Done!
Elapsed: 00:00:40
Connect phone on selected interface...
SPECIAL THANKS TO : TO BOSS "thinthin"
