Nokia N9 Succesfully Flashed by ATF

[appeasedguy8818]

Tools:

1. ATF Box
2. Micro USB
3. Pasensya....

Procedure:

1. Download his Firmware: http://all-bb5.blogspot.com/2013/10/nokia-n9-rm-696-flash-file-free-download.html

2. Follow this step:

======================================================
======================================================
BB5 MEEGO / HARMATTAN FLASHER
======================================================
======================================================

1. Turn OFF Phone and wait 10 Seconds...
2. Connect the USB Cable to the PHONE Micro USB Port
3. Connect the USB Cable to the PC USB Port

TIPS & INFORMATION:
1. To Turn OFF the Phone, PRESS and HOLD the POWER
button for at least 10 Seconds...
2. Battery Charging will still work on "DEAD" Phones.
3. Factory Reset will make Flashing 15 minutes longer
and it will Totally Erase the User Data and Remove
the Phone Lock + Security Code as well...
4. Skip ADL Chk will Cold Flash the Device.
======================================================
======================================================

Number of Image Files: 1

Processing Image File :
DFL61_HARMATTAN_22.2011.44-2_PR_LEGACY_006-OEM1-958_ARM.bin
CMT Type :
CMT Algorithm :
Secondary Sending Speed : 0Hz
Algorithm Sending Speed : 0Hz
Program Sending Speed : 0Hz
Message Reading Speed : 0Hz
Number of Blocks : 1
Entry Point: 0x003F
Page Format : -1
MAX PAGE : 0x00000580

================================================== ====
================================================== ====
BB5 MEEGO / HARMATTAN FLASHER
================================================== ====
================================================== ====

1. Turn OFF Phone and wait 10 Seconds...
2. Connect the USB Cable to the PHONE Micro USB Port
3. Connect the USB Cable to the PC USB Port

TIPS & INFORMATION:
1. To Turn OFF the Phone, PRESS and HOLD the POWER
button for at least 10 Seconds...
2. Battery Charging will still work on "DEAD" Phones.
3. Factory Reset will make Flashing 15 minutes longer
and it will Totally Erase the User Data and Remove
the Phone Lock + Security Code as well...
4. Skip ADL Chk will Cold Flash the Device.
================================================== ====
================================================== ====

Waiting For Phone on USB PORT/s...
REQUIRED MODE: BOOTLOADER MODE PHONET MODE
Sending APE-ALGORITHM: SUCCESSFUL
Nokia Bootloader/PhoNet Found!

================================================== ====
SECURE USER DATA ERASING IN PROGRESS
================================================== ====
Secure Data Erasing takes about 15 MINUTES...
DO NOT DISCONNECT THE PHONE!!! JUST WAIT...

Estimated Time to Finish Erasing: 15:50:03 (24-h Time Format)
================================================== ====

Battery Voltage Test: PASSED

Ready to Flash Images to Device...
=========================================
Processing Image: cert-sw
Processing Image: cmt-2nd
Processing Image: cmt-algo
Processing Image: cmt-mcusw
Processing Image: xloader
Processing Image: secondary
Processing Image: kernel
Processing Image: rootfs
=========================================
All Images were Succssfully Uploaded!
Software Update Done

[]: Found 1 active devices.
[Nokia N900 USB Phonet]: Opening Connection
[Nokia N900 USB Phonet]: Port opened OK!
Rebooting Phone...

Total Flashing Time (Erase + Flashing) : 00:17:58
(Booting time is NOT Included)



Phone is not Connected OR it is not in the
Required Mode...
Reboot the Phone and Enable "PC Suite" Mode

Life timer data is not yet used...
Life timer: ----:--

FACTORY SET TO : Full Factory Set
FAILED
FACTORY SET TO : User Data
FAILED
FACTORY SET TO : Leave Factory
FAILED
FACTORY SET TO : Service Center
OK
FACTORY SET TO : Software Upgrade
OK
FACTORY SET TO : Production Tune
OK

FACTORY SET TO : Full Factory Set
OK
FACTORY SET TO : User Data
OK
FACTORY SET TO : Leave Factory
OK
FACTORY SET TO : Service Center
OK
FACTORY SET TO : Software Upgrade
OK
FACTORY SET TO : Production Tune
OK

FACTORY SET TO : Full Factory Set
OK
FACTORY SET TO : User Data
OK
FACTORY SET TO : Leave Factory
OK
FACTORY SET TO : Service Center
OK
FACTORY SET TO : Software Upgrade
OK
FACTORY SET TO : Production Tune
OK

FACTORY SET TO : Full Factory Set
OK
FACTORY SET TO : User Data
OK
FACTORY SET TO : Leave Factory
OK
FACTORY SET TO : Service Center
OK
FACTORY SET TO : Software Upgrade
OK
FACTORY SET TO : Production Tune
OK

Changing Phone Mode...
(Wait for 10 seconds)
Successfully set to : Normal

br