octopus and medusa user hehe,,sph-w5500 debrand to sch-w550 then unlocked[Reference]
Attached Thumbnails 
share ko lang po naopenline ko kanina,,
model: sph-w5500
locked in show
SW Version: M6281A-KLRZ-4.0.9565T
note:as of now hindi pa po supported sa unlocking ng latest version ng
octopus_samsung tool_v1.1.9...
vigys lang nakakapagunlock ng ganitong version ng sph-w5500 sa ngayon
log sa unsupported unlocking via octopus
Code:
INFO : 12/26/2011 10:14:45 AM > Platform: Samsung Anycall INFO : 12/26/2011 10:14:45 AM > Selected port: COM4 INFO : 12/26/2011 10:14:45 AM > Selected model: SPH-W5500 INFO : 12/26/2011 10:14:46 AM > Mode: Normal INFO : 12/26/2011 10:14:46 AM > Phone model: SPH-W5500 INFO : 12/26/2011 10:14:46 AM > Firmware compiled date: May 05 2008 INFO : 12/26/2011 10:14:46 AM > Firmware compiled time: 08:00:00 INFO : 12/26/2011 10:14:46 AM > Firmware released date: Oct 03 2008 INFO : 12/26/2011 10:14:46 AM > Firmware released time: 01:20:29 INFO : 12/26/2011 10:14:46 AM > Phone IMEI: 356260-02-105736-9 INFO : 12/26/2011 10:14:46 AM > Bluetooth MAC: 00:23
7:16:BD:73 WARN : 12/26/2011 10:14:46 AM > User code is set up. Code: 0000 INFO : 12/26/2011 10:14:46 AM > SW Version: M6281A-KLRZ-4.0.9565T INFO : 12/26/2011 10:14:46 AM > Security checking... INFO : 12/26/2011 10:14:47 AM > Security checking completed successfully INFO : 12/26/2011 10:14:47 AM > Creating NVM backup INFO : 12/26/2011 10:15:16 AM > Reading NVM done! INFO : 12/26/2011 10:15:16 AM > Unlocking phone... INFO : 12/26/2011 10:15:16 AM > Switching to emergency mode... WARN : 12/26/2011 10:15:19 AM > No diagnostic ports found! INFO : 12/26/2011 10:15:19 AM > Connecting to phone on COM4 INFO : 12/26/2011 10:15:19 AM > Mode: Emergency INFO : 12/26/2011 10:15:19 AM > Detecting firmware type ERROR : 12/26/2011 10:15:20 AM > Firmware version for this phone is not supported INFO : 12/26/2011 10:16:03 AM >
resolution:
kaya ko nalaman na parehas ang cpu ng sphw-5500 sa sch-w550 ay sa medusa po,
nakalagay kasi doon,,
open medusa then select sph5500 then tick help nalagaya ang model ng cpu
open medusa uli then select schw550 naman then tick help nakalagay ang model ng cpu ayun parehas sila pati jtag pin parehas na parehas
here we go....
1.
backup muna ang nvm via octopus para safe
2.
open medusa_v1.2.9.exe
click advance, select samsung, sch-w550,
tick help then makikita ang jtag pinout
solder it, click connect
check boot only then tick read para may backup sa original boot..
tick erase para mabura ang original boot, di bale nabackup na ang original boot
check full flash then tick erase,,, para empty lahat
download SAMSUNG_SCHW550_Repair.mf sa support then write it
logs for phone info, erasing boot, erasing full flash and writing boot via medusa:
Code:
Log started at 12/26/2011 3:48:12 PM ... Welcome to Medusa Box Software version 1.2.9 Selected device model: Samsung SCH-W550 Connecting. Please wait... VREF = 0.0V is less than required level. Please check target device power supply. ERROR[035]: Target device has been powered off during connect. Selected device model: Samsung SCH-W550 Connecting. Please wait... VREF = 0.0V is less than required level. Please check target device power supply. MI: RTCK reaction time 189 ns. Detected Core ID: 200C00E1, IR Length = 4. VREF level : 2.65 V CPU : Qualcomm MSM6280 Core ID : 200C00E1 MI: Loading server. MI: Starting server. MI: Received status 0x0000F00F, cycle 0. MI: Received server capabilities 0x00000035. MI: Detailed server caps: FLASH, ECC, WDOG, DWP MI: Watchdog are preconfigured. MI: Server init. MI: Received flash ID 0xB0EC005C. MI: Flash geometry set. MI: Recheking settings... ok Server caps : 00000035 Flash device: Samsung KFW4G16Q2M Flash ID : 00EC005C Page size : 2048 bytes Block size : 64 pages (128 Kb) Block count: 4096 Flash size : 512 Mb Write protection disabled. Connect successful. Opening "C:\Documents and Settings\allan\Desktop\Samsung SCH-W550 Boot 26-12-2011 15_50_46.bin" file... Reading BOOT section. Please wait... Done Erasing BOOT section. Please wait... Done Erasing BOOT section. Please wait... Done Erasing BOOT section. Please wait... Done Erasing FIRMWARE section. Please wait... Done Opening "D:\MEDUSA Box Support\Medusa flash file\Samsung\Reapir boot\SCHW550\SAMSUNG_SCHW550_Repair.mf" file... Writting BOOT section. Please wait... Done ERROR[028]: Target device has been disconnected ...
3.
download SCH-W550_DA11.oct sa support
open octopus_samsungtool_v1.1.9
then write this file SCH-W550_DA11.oct via octopus
note: please check skip boot section the flash it
log for flashing:
Code:
INFO : 12/26/2011 3:57:13 PM > Platform: Samsung Anycall INFO : 12/26/2011 3:57:13 PM > Selected port: COM49 INFO : 12/26/2011 3:57:13 PM > Selected model: SCH-W550 INFO : 12/26/2011 3:57:13 PM > Detected phone model: SCH-W550 INFO : 12/26/2011 3:57:13 PM > Mode: Emergency INFO : 12/26/2011 3:57:13 PM > Boot section skipped INFO : 12/26/2011 3:57:13 PM > Writing code section... INFO : 12/26/2011 3:59:07 PM > Code section has been written successfully INFO : 12/26/2011 3:59:07 PM > Writing font section... INFO : 12/26/2011 4:26:11 PM > Font section has been written successfully INFO : 12/26/2011 4:26:11 PM > Writing data section... INFO : 12/26/2011 4:34:44 PM > Data section has been written successfully INFO : 12/26/2011 4:34:44 PM > Firmware writing successfully completed WARN : 12/26/2011 4:34:44 PM > Phone will restart now
after flash
unlocking na wew!!!
logs for succesfull unlocking
Code:
INFO : 12/26/2011 4:37:48 PM > Platform: Samsung Anycall INFO : 12/26/2011 4:37:48 PM > Selected port: COM49 INFO : 12/26/2011 4:37:48 PM > Selected model: SCH-W550 INFO : 12/26/2011 4:37:48 PM > Mode: Normal INFO : 12/26/2011 4:37:48 PM > Phone model: SCH-W550 INFO : 12/26/2011 4:37:48 PM > Firmware compiled date: May 05 2008 INFO : 12/26/2011 4:37:48 PM > Firmware compiled time: 08:00:00 INFO : 12/26/2011 4:37:48 PM > Firmware released date: Jan 11 2010 INFO : 12/26/2011 4:37:48 PM > Firmware released time: 09:06:49 INFO : 12/26/2011 4:37:48 PM > Phone IMEI: 357858-01-003478-3 INFO : 12/26/2011 4:37:48 PM > Bluetooth MAC: 00:12:47:01:23:45 INFO : 12/26/2011 4:37:48 PM > Security checking... INFO : 12/26/2011 4:37:50 PM > Security checking completed successfully INFO : 12/26/2011 4:37:50 PM > Creating NVM backup INFO : 12/26/2011 4:38:30 PM > Reading NVM done! INFO : 12/26/2011 4:38:30 PM > Unlocking phone... INFO : 12/26/2011 4:38:30 PM > Switching to emergency mode... WARN : 12/26/2011 4:38:33 PM > No diagnostic ports found! INFO : 12/26/2011 4:38:33 PM > Connecting to phone on COM49 INFO : 12/26/2011 4:38:34 PM > Detected phone model: SCH-W550 INFO : 12/26/2011 4:38:34 PM > Mode: Emergency INFO : 12/26/2011 4:38:34 PM > Detecting firmware type INFO : 12/26/2011 4:38:34 PM > Searching for signatures... INFO : 12/26/2011 4:38:34 PM > Reading NAND... INFO : 12/26/2011 4:38:34 PM > Writing NAND INFO : 12/26/2011 4:38:37 PM > Phone is successfully unlocked INFO : 12/26/2011 4:52:06 PM >
if ever na walang signal
just write the first nvm backup done..... 1k
hindi ko na nacapturan ang pagsolder ng jatag nagmamadali kasi akong malaman ang resulta ayun success....
screenshot on my attachment file
model: sph-w5500
locked in show
SW Version: M6281A-KLRZ-4.0.9565T
note:as of now hindi pa po supported sa unlocking ng latest version ng
octopus_samsung tool_v1.1.9...
vigys lang nakakapagunlock ng ganitong version ng sph-w5500 sa ngayon
log sa unsupported unlocking via octopus
Code:
INFO : 12/26/2011 10:14:45 AM > Platform: Samsung Anycall INFO : 12/26/2011 10:14:45 AM > Selected port: COM4 INFO : 12/26/2011 10:14:45 AM > Selected model: SPH-W5500 INFO : 12/26/2011 10:14:46 AM > Mode: Normal INFO : 12/26/2011 10:14:46 AM > Phone model: SPH-W5500 INFO : 12/26/2011 10:14:46 AM > Firmware compiled date: May 05 2008 INFO : 12/26/2011 10:14:46 AM > Firmware compiled time: 08:00:00 INFO : 12/26/2011 10:14:46 AM > Firmware released date: Oct 03 2008 INFO : 12/26/2011 10:14:46 AM > Firmware released time: 01:20:29 INFO : 12/26/2011 10:14:46 AM > Phone IMEI: 356260-02-105736-9 INFO : 12/26/2011 10:14:46 AM > Bluetooth MAC: 00:23
7:16:BD:73 WARN : 12/26/2011 10:14:46 AM > User code is set up. Code: 0000 INFO : 12/26/2011 10:14:46 AM > SW Version: M6281A-KLRZ-4.0.9565T INFO : 12/26/2011 10:14:46 AM > Security checking... INFO : 12/26/2011 10:14:47 AM > Security checking completed successfully INFO : 12/26/2011 10:14:47 AM > Creating NVM backup INFO : 12/26/2011 10:15:16 AM > Reading NVM done! INFO : 12/26/2011 10:15:16 AM > Unlocking phone... INFO : 12/26/2011 10:15:16 AM > Switching to emergency mode... WARN : 12/26/2011 10:15:19 AM > No diagnostic ports found! INFO : 12/26/2011 10:15:19 AM > Connecting to phone on COM4 INFO : 12/26/2011 10:15:19 AM > Mode: Emergency INFO : 12/26/2011 10:15:19 AM > Detecting firmware type ERROR : 12/26/2011 10:15:20 AM > Firmware version for this phone is not supported INFO : 12/26/2011 10:16:03 AM > resolution:
kaya ko nalaman na parehas ang cpu ng sphw-5500 sa sch-w550 ay sa medusa po,
nakalagay kasi doon,,
open medusa then select sph5500 then tick help nalagaya ang model ng cpu
open medusa uli then select schw550 naman then tick help nakalagay ang model ng cpu ayun parehas sila pati jtag pin parehas na parehas
here we go....
1.
backup muna ang nvm via octopus para safe
2.
open medusa_v1.2.9.exe
click advance, select samsung, sch-w550,
tick help then makikita ang jtag pinout
solder it, click connect
check boot only then tick read para may backup sa original boot..
tick erase para mabura ang original boot, di bale nabackup na ang original boot
check full flash then tick erase,,, para empty lahat
download SAMSUNG_SCHW550_Repair.mf sa support then write it
logs for phone info, erasing boot, erasing full flash and writing boot via medusa:
Code:
Log started at 12/26/2011 3:48:12 PM ... Welcome to Medusa Box Software version 1.2.9 Selected device model: Samsung SCH-W550 Connecting. Please wait... VREF = 0.0V is less than required level. Please check target device power supply. ERROR[035]: Target device has been powered off during connect. Selected device model: Samsung SCH-W550 Connecting. Please wait... VREF = 0.0V is less than required level. Please check target device power supply. MI: RTCK reaction time 189 ns. Detected Core ID: 200C00E1, IR Length = 4. VREF level : 2.65 V CPU : Qualcomm MSM6280 Core ID : 200C00E1 MI: Loading server. MI: Starting server. MI: Received status 0x0000F00F, cycle 0. MI: Received server capabilities 0x00000035. MI: Detailed server caps: FLASH, ECC, WDOG, DWP MI: Watchdog are preconfigured. MI: Server init. MI: Received flash ID 0xB0EC005C. MI: Flash geometry set. MI: Recheking settings... ok Server caps : 00000035 Flash device: Samsung KFW4G16Q2M Flash ID : 00EC005C Page size : 2048 bytes Block size : 64 pages (128 Kb) Block count: 4096 Flash size : 512 Mb Write protection disabled. Connect successful. Opening "C:\Documents and Settings\allan\Desktop\Samsung SCH-W550 Boot 26-12-2011 15_50_46.bin" file... Reading BOOT section. Please wait... Done Erasing BOOT section. Please wait... Done Erasing BOOT section. Please wait... Done Erasing BOOT section. Please wait... Done Erasing FIRMWARE section. Please wait... Done Opening "D:\MEDUSA Box Support\Medusa flash file\Samsung\Reapir boot\SCHW550\SAMSUNG_SCHW550_Repair.mf" file... Writting BOOT section. Please wait... Done ERROR[028]: Target device has been disconnected ...
3.
download SCH-W550_DA11.oct sa support
open octopus_samsungtool_v1.1.9
then write this file SCH-W550_DA11.oct via octopus
note: please check skip boot section the flash it
log for flashing:
Code:
INFO : 12/26/2011 3:57:13 PM > Platform: Samsung Anycall INFO : 12/26/2011 3:57:13 PM > Selected port: COM49 INFO : 12/26/2011 3:57:13 PM > Selected model: SCH-W550 INFO : 12/26/2011 3:57:13 PM > Detected phone model: SCH-W550 INFO : 12/26/2011 3:57:13 PM > Mode: Emergency INFO : 12/26/2011 3:57:13 PM > Boot section skipped INFO : 12/26/2011 3:57:13 PM > Writing code section... INFO : 12/26/2011 3:59:07 PM > Code section has been written successfully INFO : 12/26/2011 3:59:07 PM > Writing font section... INFO : 12/26/2011 4:26:11 PM > Font section has been written successfully INFO : 12/26/2011 4:26:11 PM > Writing data section... INFO : 12/26/2011 4:34:44 PM > Data section has been written successfully INFO : 12/26/2011 4:34:44 PM > Firmware writing successfully completed WARN : 12/26/2011 4:34:44 PM > Phone will restart now
after flash
unlocking na wew!!!
logs for succesfull unlocking
Code:
INFO : 12/26/2011 4:37:48 PM > Platform: Samsung Anycall INFO : 12/26/2011 4:37:48 PM > Selected port: COM49 INFO : 12/26/2011 4:37:48 PM > Selected model: SCH-W550 INFO : 12/26/2011 4:37:48 PM > Mode: Normal INFO : 12/26/2011 4:37:48 PM > Phone model: SCH-W550 INFO : 12/26/2011 4:37:48 PM > Firmware compiled date: May 05 2008 INFO : 12/26/2011 4:37:48 PM > Firmware compiled time: 08:00:00 INFO : 12/26/2011 4:37:48 PM > Firmware released date: Jan 11 2010 INFO : 12/26/2011 4:37:48 PM > Firmware released time: 09:06:49 INFO : 12/26/2011 4:37:48 PM > Phone IMEI: 357858-01-003478-3 INFO : 12/26/2011 4:37:48 PM > Bluetooth MAC: 00:12:47:01:23:45 INFO : 12/26/2011 4:37:48 PM > Security checking... INFO : 12/26/2011 4:37:50 PM > Security checking completed successfully INFO : 12/26/2011 4:37:50 PM > Creating NVM backup INFO : 12/26/2011 4:38:30 PM > Reading NVM done! INFO : 12/26/2011 4:38:30 PM > Unlocking phone... INFO : 12/26/2011 4:38:30 PM > Switching to emergency mode... WARN : 12/26/2011 4:38:33 PM > No diagnostic ports found! INFO : 12/26/2011 4:38:33 PM > Connecting to phone on COM49 INFO : 12/26/2011 4:38:34 PM > Detected phone model: SCH-W550 INFO : 12/26/2011 4:38:34 PM > Mode: Emergency INFO : 12/26/2011 4:38:34 PM > Detecting firmware type INFO : 12/26/2011 4:38:34 PM > Searching for signatures... INFO : 12/26/2011 4:38:34 PM > Reading NAND... INFO : 12/26/2011 4:38:34 PM > Writing NAND INFO : 12/26/2011 4:38:37 PM > Phone is successfully unlocked INFO : 12/26/2011 4:52:06 PM >
if ever na walang signal
just write the first nvm backup done..... 1k
hindi ko na nacapturan ang pagsolder ng jatag nagmamadali kasi akong malaman ang resulta ayun success....
screenshot on my attachment file