REFERENCE Oppo A37fw Pattern Remove CM2QLM - done

[slyboy_12]

1. open computer mine windows 10 OS
2. insert CM2 Dongle to USB Port of Computer, make sure you Install all Driver Properly
3. Insert USB DATA Cable

Follow the instruction ni CM2

Card found : C8068BDB , v0136
Infinity-Box Chinese Miracle Qualcomm Module [QLM] v 1.16


Operation : Read PatternLock [ v1.16 ]

1. Power Off Phone , Remove battery , Insert back
2. PRESS and HOLD BOTH VOLUME KEYS!
3. Insert USB cable. In some cases require use EDL cable or TP to force EDL mode!

Wait for phone...

BREAK : Device not found!
HINT : Check cable, connection and drivers!

Reconnect Power/Cable!

Operation : Read PatternLock [ v1.16 ]

1. Power Off Phone , Remove battery , Insert back
2. PRESS and HOLD BOTH VOLUME KEYS!
3. Insert USB cable. In some cases require use EDL cable or TP to force EDL mode!

Wait for phone...

BREAK : Device not found!
HINT : Check cable, connection and drivers!

Reconnect Power/Cable!

Operation : Read PatternLock [ v1.16 ]

1. Power Off Phone , Remove battery , Insert back
2. PRESS and HOLD BOTH VOLUME KEYS!
3. Insert USB cable. In some cases require use EDL cable or TP to force EDL mode!

Wait for phone...
Device Found!
Initialize ...

ERROR : Fail to init protocol!
HINT : Check cable, connection and drivers!

Reconnect Power/Cable!

Operation : Read PatternLock [ v1.16 ]

1. Power Off Phone , Remove battery , Insert back
2. PRESS and HOLD BOTH VOLUME KEYS!
3. Insert USB cable. In some cases require use EDL cable or TP to force EDL mode!

Wait for phone...
Device Found!
Initialize ...

ERROR : Fail to init protocol!
HINT : Check cable, connection and drivers!

Reconnect Power/Cable!

Operation : Read PatternLock [ v1.16 ]

1. Power Off Phone , Remove battery , Insert back
2. PRESS and HOLD BOTH VOLUME KEYS!
3. Insert USB cable. In some cases require use EDL cable or TP to force EDL mode!

Wait for phone...
Device Found!
Initialize ...
Handshake passed!
ID_BLOCK_I : SnapDragon 410 [MSM8916]
ID_BLOCK_S : 233B13F3
ID_BLOCK_L : F0706A9443AFD4D7B0E56F70BF8A0A42
ID_BLOCK_L : 166DD37A7FE648DDF03F90495BAA4487
Use CM2 Internal Loader
Loader Sent! Initializing ...
Running FireHose on BBID : MSM8916 , FLASH : eMMC , mVER : 1
MemInfo : 0x0003 / 0x0200 / 0x00000003AB400000 [ eMMC 16 GiB ]
ExtInfo : 0x00004000/00004000/00001000/00001000/00000200
Boot Ok!

Read Ok! Trying decrypt ...
PatternLock sequence : 741852369

Done!
Elapsed: 00:00:51

Reconnect Power/Cable!

thanks for viewing..