REFERENCE Oppo Clone P20 Pro Flash File | MT6580 Android 5.1 (Update) Stock Rom

[jeff3]

Oppo Clone P20 Pro Flash File | MT6580 Android 5.1 (Update) Stock Rom

Download Oppo Clone P20 Pro Flash File (Stock Rom)
Flashing the Stock Firmware on Oppo Clone P20 Pro is quite easy and safe if you follow the guidelines and requirements we’ve mentioned below. You just need to download the firmware Rom and required tools/drivers on your PC and No need here any box dongle premium tools. it’s completely free solution without any box, so then follow the our guide to install the Firmware on Oppo Clone P20 Pro via SP Flash Tool (Smartphone flash tool). This guide is also helpful to recover your kind any any software issue

Oppo Clone P20 Pro The Following issues Will be Solved By this Firmware.

• Fix your Oppo Clone P20 Pro bootloop & restart problem
• Auto fastboot mode and recovery
• Unroot or fix bugs your phone
• Remove Pin/Pattern/privacy/password & frp lock
• Upgrade and downgrade your phone
• Oppo Clone P20 Pro Fix stuck on logo
• Removes any virus, spyware or Adware unwanted apps
• Fix lcd/display black & white after flash
• Sp tools error while try to flash with other firmwares
• Oppo Clone P20 Pro Unbrick Dead After Flash

About Phone Information
Brand: Oppo
CPU : MT6580
Android : 5.1
File Type : CM2 Readed
File Size : 575MB

No Need Box For Flashing Flash With Sp Flash Tool
Oppo Clone P20 Pro Update Official Firmware Stock Rom Download
MT6580__Welcome__T702__P20_Pro__5.1__ALPS.L1.MP6.V2.19_HCT6580.WEG.A.L_P55
Hang Logo Fixed
Download Here
Before flashing this rom make sure to follow the pre-requisite and install the necessary have you drivers and tools on your PC And laptop to ready to flashing your Oppo Clone P20 Pro
Pre-Requirements:

• This Firmware will only work on Oppo Clone P20 Pro. Don’t try it on others model.
• A PC And Laptop
• A Good USB Data Cable
• should have your device charge the battery up to 60%
• Oppo Clone P20 Pro Rom And Flashtool/USB Drivers

After downloading the Oppo Clone P20 Pro Flash file Tools Driver From above link .you will need to use Smartphone Sp flash Tool to flash the Stock firmware. Here is a detailed guide mentioned below which you can follow completely Step by Step
Instructions to Flashing Stock ROM on Oppo Clone P20 Pro

Step 1. Download Firmware ROM Included Winrar/7ip Flash Tool & Usb Driver
Step 2. Extract The ROM Or Driver And Tool On Your PC
Step 3. After Extracting You Will See Flash Tool, Driver And Instruction Manual
Step 4. Install the USB Drivers Skip If Drivers Are Already Installed
Step 5. Open The Sp Flash Tool And load The Scatter File From The Firmware Folder
Step 6. Click Download Button In The SP Flash Tool To Start Flashing
Step 7. Connect Your Smartphone To The Computer Using By Good USB Cable
Step 8. Green Rink Ok Massage Will Appear Of Successful Flashing Complete And You Done
How To Use Sp Flash Tool Guide With Photos Step By Step
You can follow our video tutriol Below
How To Use Sp Flash Tool Video Tutriol Guide