jeff3
Expired Account
- Joined
- Jun 27, 2014
- Messages
- 1,315
- Reaction score
- 755
- Points
- 521
- Location
- San Jose Del Monte Bulacan
Oppo Clone S10 Plus Flash File Android 8.1 Stock Rom
MT6580__lmkj__OPPO__OPPO__8.1__ALPS.L1.MP6.V2_AEON6580.WEG.L_P73
Download Here
Before flashing this rom make sure to follow the pre-requisite and install the necessary have you drivers and tools on your PC And laptop to ready to flashing your Oppo Clone S10 Plus
Pre-Requirements:
Instructions to Flashing Stock ROM on Oppo Clone S10 Plus
Step 1. Download Firmware ROM Included Winrar/7ip Flash Tool & Usb Driver
Step 2. Extract The ROM Or Driver And Tool On Your PC
Step 3. After Extracting You Will See Flash Tool, Driver And Instruction Manual
Step 4. Install the USB Drivers Skip If Drivers Are Already Installed
Step 5. Open The Sp Flash Tool And load The Scatter File From The Firmware Folder
Step 6. Click Download Button In The SP Flash Tool To Start Flashing
Step 7. Connect Your Smartphone To The Computer Using By Good USB Cable
Step 8. Green Rink Ok Massage Will Appear Of Successful Flashing Complete And You Done
How To Use Sp Flash Tool Guide With Photos Step By Step
You can follow our video tutorial Below
How To Use Sp Flash Tool Video tutorial Guide
Oppo Clone S10 Plus The Following issues Will be Solved By this Firmware.
- Fix your Oppo Clone S10 Plus bootloop & restart problem
- Auto fastboot mode and recovery
- Unroot or fix bugs your phone
- Remove Pin/Pattern/privacy/password & frp lock
- Upgrade and downgrade your phone
- Oppo Clone S10 Plus Fix stuck on logo
- Removes any virus, spyware or Adware unwanted apps
- Fix lcd/display black & white after flash
- Sp tools error while try to flash with other firmware
- Oppo Clone S10 Plus Unbrick Dead After Flash
MT6580__lmkj__OPPO__OPPO__8.1__ALPS.L1.MP6.V2_AEON6580.WEG.L_P73
Download Here
Before flashing this rom make sure to follow the pre-requisite and install the necessary have you drivers and tools on your PC And laptop to ready to flashing your Oppo Clone S10 Plus
Pre-Requirements:
- This Firmware will only work on Oppo Clone S10 Plus. Don’t try it on others model.
- A PC And Laptop
- A Good USB Data Cable
- should have your device charge the battery up to 60%
- Oppo Clone S10 Plus Rom And Flashtool/USB Drivers
Instructions to Flashing Stock ROM on Oppo Clone S10 Plus
Step 1. Download Firmware ROM Included Winrar/7ip Flash Tool & Usb Driver
Step 2. Extract The ROM Or Driver And Tool On Your PC
Step 3. After Extracting You Will See Flash Tool, Driver And Instruction Manual
Step 4. Install the USB Drivers Skip If Drivers Are Already Installed
Step 5. Open The Sp Flash Tool And load The Scatter File From The Firmware Folder
Step 6. Click Download Button In The SP Flash Tool To Start Flashing
Step 7. Connect Your Smartphone To The Computer Using By Good USB Cable
Step 8. Green Rink Ok Massage Will Appear Of Successful Flashing Complete And You Done
How To Use Sp Flash Tool Guide With Photos Step By Step
You can follow our video tutorial Below
How To Use Sp Flash Tool Video tutorial Guide