Oppo Neo 5 1201 16GB Read Pattern

[meerlgsm]

Oppo Neo 5 1201 16GB Read Pattern, ayaw niya madelete ang mga apps kaya open agad CM2

Operation : Read Pattern/DP Lock [ v1.58 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 14 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6582
BB_CPU_NME : [MediaTek] MT6582_S00
BB_CPU_EXT : 0xCA01 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer   : 0x0005
BLVersion : 0x00FE
PreLoader : NOT Active [ Erased ]
BootLdrSS : NORMAL with PRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v3.3001.00.00
Sending and initialize DA ...
Running DA ver.4.2 on BBID : 0x87
NAND Flash : NOT INSTALLED
eMMC Flash : 150100463331324D4206FF909BAB3303
Initialize Memory ... 
DRAM configured from ScatFW!
DRAM initialize passed!
DRAM size : 0x40000000
DAgent sent , init HW now
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x15 , OEM : 0100
[eMMC] : FLASH_INF : [SAMSUNG] , BM213
[eMMC] : FLASH_CID : 150100463331324D4206FF909BAB3303
[eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00400000
[eMMC] : FLASH_LEN : 0x00000003A3E00000
[eMMC] : FLASH_UCP : 14910 MiB [eMMC 16 GiB]
DEV RID    : 0xE5C818C39F8F4D22CB1924761AF6DDCB
INT RAM    : 0x00020000
EXT RAM    : 0x40000000 [1 GiB]
BOOT TYPE  : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

USBDL : Init HSUSB Ok
Reading data ... 

Get Locks ...
PatternLock Sequnce : 25874

Done!
Elapsed: 00:00:26
Reconnect Power/Cable!

Start  at : [10/30/2017 / 6:56:49 PM]
Operation : Read Flash [ v1.58 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 14 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6582
BB_CPU_NME : [MediaTek] MT6582_S00
BB_CPU_EXT : 0xCA01 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer   : 0x0005
BLVersion : 0x00FE
PreLoader : NOT Active [ Erased ]
BootLdrSS : NORMAL with PRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v3.3001.00.00
Sending and initialize DA ...
Running DA ver.4.2 on BBID : 0x87
NAND Flash : NOT INSTALLED
eMMC Flash : 150100463331324D4206FF909BAB3303
Initialize Memory ... 
DRAM configured from ScatFW!
DRAM initialize passed!
DRAM size : 0x40000000
DAgent sent , init HW now
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x15 , OEM : 0100
[eMMC] : FLASH_INF : [SAMSUNG] , BM213
[eMMC] : FLASH_CID : 150100463331324D4206FF909BAB3303
[eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00400000
[eMMC] : FLASH_LEN : 0x00000003A3E00000
[eMMC] : FLASH_UCP : 14910 MiB [eMMC 16 GiB]
DEV RID    : 0xE5C818C39F8F4D22CB1924761AF6DDCB
INT RAM    : 0x00020000
EXT RAM    : 0x40000000 [1 GiB]
BOOT TYPE  : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

Reading Flash Content now ... 
USBDL : Init HSUSB Ok!

Brand     : OPPO
ProdName  : 1201
ProdModel : 1201
Device    : 1201
AndroidVer: 5.1
MTKxCPU   : MT6582
MTKxPRJ   : 1201EX-A_11_A.16_170329

[Read Ok] : preloader_oppo6582_15066.bin
[Read Ok] : MBR
[Read Ok] : EBR1
[Read Ok] : lk.bin
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : secro.img
[Read Ok] : logo.bin
[Read Ok] : EBR2
[Read Ok] : EBR3
[Read Ok] : system.img
[Read Ok] : cache.img
[Read Ok] : userdata.img

[ScatCFG] : MT6582 / V1.1.1 / oppo6582_15066 / EMMC
Android Info saved
HWConfig Info saved
FW Size : 2451 MiB
Scatter saved to : C:\Users\Meerl\Desktop\OPPO Neo 5 1201 16GB SPFlashtool\OPPO Neo 5 1201 16GB SPFlashtool\MT6582__OPPO__1201__1201__5.1__1201EX-A_11_A.16_170329\

All done!

Done!
Elapsed: 00:11:12
Reconnect Power/Cable!

Finish at : [10/30/2017 / 7:08:02 PM]

Maraming salamat sa mga nag-view

 

[meerlgsm]

eto pala info niya

Created by Infinity-Box (c) Chinese Miracle II (c) 2016
Device Brand   : OPPO
Device Model   : 1201
Device CPU     : MT6582
Device IntName : 1201
Device Version : 5.1
Device Compile : 3/29/2017 9:26:57 AM
Device Project : 1201EX-A_11_A.16_170329
Device ExtInfo : 1201