- Joined
- Oct 30, 2014
- Messages
- 1,127
- Reaction score
- 19
- Points
- 181
REFFERENCE ONLY:
P5100
LOG
Running:SAMSUNG: MoviNAND Reset + Format...
Z3X EasyJtag Software ver. 2.6.0.1
Skip loading eMMC Addon Firmware
CMD Pullup Level:969 mV
CMD Active Level:3031 mV
Box IO Level:3300 mV
CLK Rate:70000 khz
EMMC ROM2/3 (Boot Partitions) Capacity: 512 kB
EMMC RPMB (Replay Protected Memory Block) Capacity: 128 kB
Sending Internal Reconfiguration Request...
Waiting configuration Apply!
Restoring configuration...
EMMC ROM2/3 (Boot Partitions) Capacity: 512 kB
EMMC RPMB (Replay Protected Memory Block) Capacity: 128 kB
Wiping Card... Please do not touch it!
Please don't forget to repair extCSD from backup!
Done.
Running:SAMSUNG: MoviNAND Factory Reset...
Skip loading eMMC Addon Firmware
CMD Pullup Level:969 mV
CMD Active Level:3031 mV
Box IO Level:3300 mV
CLK Rate:70000 khz
Sending Smart Wipe Request...
Wiping Card... Please do not touch it!
Please don't forget to repair extCSD from backup!
Done.
Running:SAMSUNG: eMMC firmware update...
Confirmed eMMC Part Number: KLMAG2GE4A-A002
Z3X EasyJtag Software ver. 2.6.0.1
Loading eMMC Addon Firmware... IO: 3300 mV
Box S/N: 040170124137F9C6, ,FW Ver.: 01.60
CMD Pullup Level:1000 mV
CMD Active Level:2939 mV
Box IO Level:3300 mV
CLK Rate:70000 khz
Setup firmware update mode, wait 2..30 sec...
Success!
Sending eMMC firmware...
Success!
Verifying eMMC firmware...
Success!
Flashing eMMC firmware...
Success!
Repairing eMMC CID...
Success!
eMMC firmware is updated now!
Please reconnect all eMMC lines before next operation!
Please don't forget to repair extCSD from backup!
Please don't forget to configure BOOT sizes!
Done.
Compression is ON
Z3X EasyJtag Software ver. 2.6.0.1
Loading eMMC GEN1 Firmware... IO: 3300 mV
Box S/N: 040170124137F9C6, ,FW Ver.: 01.60
CMD Pullup Level:1000 mV
CMD Active Level:2928 mV
Box IO Level:3300 mV
CLK Rate:14000 khz
HiPower mode is ON!
---------- eMMC Device Information ----------
EMMC CID : 1501004D414732474105C8049C3A5F36
EMMC CSD : D02701320F5903FFF6DBFFFF8A404006
EMMC Manufacturer ID: 0015 , OEM ID: 0100
EMMC Date: 05/2012 Rev.0x5
EMMC NAME: MAG2GA , S/N: 3355745338
EMMC NAME (HEX): 4D414732474100
EMMC ROM1 (Main User Data) Capacity: 15028 MB
EMMC ROM2 (Boot Partition 1) Capacity: 2048 kB
EMMC ROM3 (Boot Partition 2) Capacity: 2048 kB
EMMC RPMB (Replay Protected Memory Block) Capacity: 128 kB
EMMC Permanent Write Protection: No
EMMC Temporary Write Protection: No
EMMC Password Locked: No
Extended CSD rev 1.5 (MMC 4.41)
Boot configuration [PARTITION_CONFIG: 0x00] No boot partition configured.
Boot bus config [177]: 0x00 , width 1bit , Partition config [179]: 0x00.
H/W reset function [RST_N_FUNCTION]: 0x00
High-capacity W protect group size [HC_WP_GRP_SIZE: 0x00000000]
Partitioning Support [PARTITIONING_SUPPORT]: 0x03
Device support partitioning feature
Device can have enhanced tech.
Partitioning Setting [PARTITION_SETTING_COMPLETED]: 0x00
---------------------------------------------
Backup saved: MAG2GA_3355745338_20170823_0637.extcsd
Done.
extCSD file...C:\Program Files\Z3X\EASYJTAG\Backups\MAG2GA_3355745338_20170823_0558.extcsd
Running:Repair extCSD...
Z3X EasyJtag Software ver. 2.6.0.1
Skip loading eMMC Addon Firmware
CMD Pullup Level:1000 mV
CMD Active Level:2928 mV
Box IO Level:3300 mV
CLK Rate:14000 khz
------------Parsing extCSD------------
=============================================
Extended CSD rev 1.5 (MMC 4.41)
=============================================
Card Supported Command sets [S_CMD_SET: 0x01]
HPI Features [HPI_FEATURE: 0x03]:
implementation based on CMD12
Background operations support [BKOPS_SUPPORT: 0x01]
Background operations status [BKOPS_STATUS: 0x00]
1st Initialisation Time after programmed sector [INI_TIMEOUT_AP: 0x1e]
Power class for 52MHz, DDR at 3.6V [PWR_CL_DDR_52_360: 0x00]
Power class for 52MHz, DDR at 1.95V [PWR_CL_DDR_52_195: 0x00]
Minimum Performance for 8bit at 52MHz in DDR mode:
[MIN_PERF_DDR_W_8_52: 0x00]
[MIN_PERF_DDR_R_8_52: 0x00]
TRIM Multiplier [TRIM_MULT: 0x02]
Secure Feature support [SEC_FEATURE_SUPPORT: 0x15]
Secure Erase Multiplier [SEC_ERASE_MULT: 0x1b]
Secure TRIM Multiplier [SEC_TRIM_MULT: 0x11]
Boot Information [BOOT_INFO: 0x07]
Device supports alternative boot method
Device supports dual data rate during boot
Device supports high speed timing during boot
Boot partition size [BOOT_SIZE_MULTI: 0x10]
Access size [ACC_SIZE: 0x07]
High-capacity erase unit size [HC_ERASE_GRP_SIZE: 0x01]
High-capacity erase timeout [ERASE_TIMEOUT_MULT: 0x01]
Reliable write sector count [REL_WR_SEC_C: 0x01]
High-capacity W protect group size [HC_WP_GRP_SIZE: 0x50]
Sleep current (VCC) [S_C_VCC: 0x07]
Sleep current (VCCQ) [S_C_VCCQ: 0x07]
Sleep/awake timeout [S_A_TIMEOUT: 0x11]
Sector Count [SEC_COUNT: 0x01d5a000]
Minimum Write Performance for 8bit:
[MIN_PERF_W_8_52: 0x00]
[MIN_PERF_R_8_52: 0x00]
[MIN_PERF_W_8_26_4_52: 0x00]
[MIN_PERF_R_8_26_4_52: 0x00]
Minimum Write Performance for 4bit:
[MIN_PERF_W_4_26: 0x00]
[MIN_PERF_R_4_26: 0x00]
Power classes registers:
[PWR_CL_26_360: 0x00]
[PWR_CL_52_360: 0x00]
[PWR_CL_26_195: 0x00]
[PWR_CL_52_195: 0x00]
Partition switching timing [PARTITION_SWITCH_TIME: 0x01]
Out-of-interrupt busy timing [OUT_OF_INTERRUPT_TIME: 0x02]
Card Type [CARD_TYPE: 0x07]
CSD structure version [CSD_STRUCTURE: 0x02]
Command set [CMD_SET: 0x00]
Command set revision [CMD_SET_REV: 0x00]
Power class [POWER_CLASS: 0x00]
High-speed interface timing [HS_TIMING: 0x00]
Erased memory content [ERASED_MEM_CONT: 0x00]
Boot configuration bytes [PARTITION_CONFIG: 0x00]
Not boot enabled
No access to boot partition
Boot config protection [BOOT_CONFIG_PROT: 0x00]
Boot bus Conditions [BOOT_BUS_CONDITIONS: 0x00]
High-density erase group definition [ERASE_GROUP_DEF: 0x00]
Boot write protection status registers [BOOT_WP_STATUS]: 0x00
Boot Area Write protection [BOOT_WP]: 0x00
Power ReadOnly locking: possible
Permanent ReadOnly locking: possible
Read Only lock status: not locked
User area write protection register [USER_WP]: 0x00
FW configuration [FW_CONFIG]: 0x00
RPMB Size [RPMB_SIZE_MULT]: 0x01
Write reliability setting register [WR_REL_SET]: 0x1f
Write reliability parameter register [WR_REL_PARAM]: 0x05
Enable background operations handshake [BKOPS_EN]: 0x00
H/W reset function [RST_N_FUNCTION]: 0x00
HPI management [HPI_MGMT]: 0x00
Partitioning Support [PARTITIONING_SUPPORT]: 0x03
Device support partitioning feature
Device can have enhanced tech.
Max Enhanced Area Size [MAX_ENH_SIZE_MULT]: 0x0000bb
Partitions attribute [PARTITIONS_ATTRIBUTE]: 0x00
Partitioning Setting [PARTITION_SETTING_COMPLETED]: 0x01
General Purpose Partition Size [GP_SIZE_MULT_4]: 0x000000
[GP_SIZE_MULT_3]: 0x000000
[GP_SIZE_MULT_2]: 0x000000
[GP_SIZE_MULT_1]: 0x000000
Enhanced User Data Area Size [ENH_SIZE_MULT]: 0x000000
Enhanced User Data Start Address [ENH_START_ADDR]: 0x000000
Bad Block Management mode [SEC_BAD_BLK_MGMNT]: 0x00
------------Done parsing------------
Writing as extCSD 4.41
Done.
Compression is ON
Z3X EasyJtag Software ver. 2.6.0.1
Loading eMMC GEN1 Firmware... IO: 3300 mV
Box S/N: 040170124137F9C6, ,FW Ver.: 01.60
CMD Pullup Level:1000 mV
CMD Active Level:2928 mV
Box IO Level:3300 mV
CLK Rate:14000 khz
HiPower mode is ON!
---------- eMMC Device Information ----------
EMMC CID : 1501004D414732474105C8049C3A5F36
EMMC CSD : D02701320F5903FFF6DBFFFF8A404006
EMMC Manufacturer ID: 0015 , OEM ID: 0100
EMMC Date: 05/2012 Rev.0x5
EMMC NAME: MAG2GA , S/N: 3355745338
EMMC NAME (HEX): 4D414732474100
EMMC ROM1 (Main User Data) Capacity: 15028 MB
EMMC ROM2 (Boot Partition 1) Capacity: 2048 kB
EMMC ROM3 (Boot Partition 2) Capacity: 2048 kB
EMMC RPMB (Replay Protected Memory Block) Capacity: 128 kB
EMMC Permanent Write Protection: No
EMMC Temporary Write Protection: No
EMMC Password Locked: No
Extended CSD rev 1.5 (MMC 4.41)
Boot configuration [PARTITION_CONFIG: 0x00] No boot partition configured.
Boot bus config [177]: 0x00 , width 1bit , Partition config [179]: 0x00.
H/W reset function [RST_N_FUNCTION]: 0x00
High-capacity W protect group size [HC_WP_GRP_SIZE: 0x00000000]
Partitioning Support [PARTITIONING_SUPPORT]: 0x03
Device support partitioning feature
Device can have enhanced tech.
Partitioning Setting [PARTITION_SETTING_COMPLETED]: 0x01
---------------------------------------------
Backup saved: MAG2GA_3355745338_20170823_0639.extcsd
Done.
eMMC_tool Suite ver. 1.4.8.0
Microsoft Windows 7 (64 bit) build 7601 (6.1.7600.16385)
Looking for EasyJTAG box...
EasyJTAG API ver. 2008
Setting IO Levels to 3.3V
Setting frequence to 21 Mhz
HiPower mode is OFF
EasyJTAG Box Serial = 040170124137F9C6
Card Serial = AA76-C170
EasyJTAG Box Firmware = 01.60
Changelog:
08.08.2017 (ver 1.4.8.0)
Fix: Bugs that have been found through your crash report
Fix: Saving VCF for contacts
Add: Multiple file selection for Samsung firmware
Add: Write full Extcsd or write only the boot configuration ("Repair Extcsd" button)
Add: Intel vendor (for easy read/write ROM2/ROM3/GP1)
Add: "Pinouts" tab (taken from the catalog of classic software)
Add: Checker for Sony TrimArea
Add: Speed graph for "Random verify emmc"
Add: Fat16/Fat32/exFat support (Explorer)
HiPower mode is OFF
Frequence: 21 Mhz
CMD Pullup Level: 990 mV
CMD Active Level: 2722 mV
EMMC Device Information :
EMMC CID: 1501004D414732474105C8049C3A5F36
EMMC CSD: D02701320F5903FFF6DBFFFF8A404006
EMMC Manufacture Name: SAMSUNG
EMMC NAME: MAG2GA , S/N: C8049C3A , rev. 05
EMMC NAME (HEX): 4D4147324741
EMMC ROM 1 (Main User Data) Capacity: 15028 MB (0003AB400000)
EMMC ROM 2/3 (Boot Partition 1/2) Capacity: 2048 KB (000000200000)
EMMC RPMB (Replay Protected Memory Block) Capacity: 128 KB (000000020000)
Extended CSD Information :
Extended CSD rev: 1.5 (MMC 4.41)
Backup saved: MAG2GA_C8049C3A_20170823_064148.extcsd
EMMC Init completed.
Get firmware version
Firmware info not found
HiPower mode is OFF
Frequence: 21 Mhz
CMD Pullup Level: 1010 mV
CMD Active Level: 2928 mV
EMMC Device Information :
EMMC CID: 1501004D414732474105C8049C3A5F36
EMMC CSD: D02701320F5903FFF6DBFFFF8A404006
EMMC Manufacture Name: SAMSUNG
EMMC NAME: MAG2GA , S/N: C8049C3A , rev. 05
EMMC NAME (HEX): 4D4147324741
EMMC ROM 1 (Main User Data) Capacity: 15028 MB (0003AB400000)
EMMC ROM 2/3 (Boot Partition 1/2) Capacity: 2048 KB (000000200000)
EMMC RPMB (Replay Protected Memory Block) Capacity: 128 KB (000000020000)
Extended CSD Information :
Extended CSD rev: 1.5 (MMC 4.41)
Backup saved: MAG2GA_C8049C3A_20170823_064331.extcsd
EMMC Init completed.
Operation: Erase all eMMC Regions at once
eMMC switching to ROM2
Erasing partition...
Done erasing partition.
eMMC switching to ROM3
Erasing partition...
Done erasing partition.
eMMC switching to ROM1
Erasing partition...
Done erasing partition.
HiPower mode is OFF
Frequence: 21 Mhz
CMD Pullup Level: 1000 mV
CMD Active Level: 2949 mV
EMMC Device Information :
EMMC CID: 1501004D414732474105C8049C3A5F36
EMMC CSD: D02701320F5903FFF6DBFFFF8A404006
EMMC Manufacture Name: SAMSUNG
EMMC NAME: MAG2GA , S/N: C8049C3A , rev. 05
EMMC NAME (HEX): 4D4147324741
EMMC ROM 1 (Main User Data) Capacity: 15028 MB (0003AB400000)
EMMC ROM 2/3 (Boot Partition 1/2) Capacity: 2048 KB (000000200000)
EMMC RPMB (Replay Protected Memory Block) Capacity: 128 KB (000000020000)
Extended CSD Information :
Extended CSD rev: 1.5 (MMC 4.41)
Backup saved: MAG2GA_C8049C3A_20170823_064856.extcsd
EMMC Init completed.
Operation: Write all eMMC Regions at once
Writing BootConfig ...
Reg: 179 Value: 0x00
Reg: 177 Value: 0x00
Reg: 162 Value: 0x00
Done
Writing to: ROM2 , start: 0x000000000000 , size: 0x000000200000
Filename: boot1.bin
eMMC switching to ROM2
Writing partition...
Done writing partition. Write speed: 499.63 Kb/s
Writing to: ROM3 , start: 0x000000000000 , size: 0x000000200000
Filename: boot2.bin
eMMC switching to ROM3
Writing partition...
Done writing partition. Write speed: 621.38 Kb/s
Writing to: ROM1 , start: 0x000000000000 , size: 0x0003AB400000
Filename: userarea.bin
eMMC switching to ROM1
Writing partition...
Done writing partition. Write speed: 1340.95 Kb/s
All done
HiPower mode is OFF
Frequence: 21 Mhz
CMD Pullup Level: 1000 mV
CMD Active Level: 2939 mV
EMMC Device Information :
EMMC CID: 1501004D414732474105C8049C3A5F36
EMMC CSD: D02701320F5903FFF6DBFFFF8A404006
EMMC Manufacture Name: SAMSUNG
EMMC NAME: MAG2GA , S/N: C8049C3A , rev. 05
EMMC NAME (HEX): 4D4147324741
EMMC ROM 1 (Main User Data) Capacity: 15028 MB (0003AB400000)
EMMC ROM 2/3 (Boot Partition 1/2) Capacity: 2048 KB (000000200000)
EMMC RPMB (Replay Protected Memory Block) Capacity: 128 KB (000000020000)
Extended CSD Information :
Extended CSD rev: 1.5 (MMC 4.41)
Backup saved: MAG2GA_C8049C3A_20170823_102307.extcsd
EMMC Init completed.
Get firmware version
Brand = samsung
Model = GT-P5100
Phone platform = omap4
CPU Abi = armeabi-v7a
Android release = 4.1.1
Firmware version = JRO03C.P5100XXCLL2
Firmware date = Wed Dec 12 19:10:59 KST 2012
FENIS NA=))
P5100
LOG
Running:SAMSUNG: MoviNAND Reset + Format...
Z3X EasyJtag Software ver. 2.6.0.1
Skip loading eMMC Addon Firmware
CMD Pullup Level:969 mV
CMD Active Level:3031 mV
Box IO Level:3300 mV
CLK Rate:70000 khz
EMMC ROM2/3 (Boot Partitions) Capacity: 512 kB
EMMC RPMB (Replay Protected Memory Block) Capacity: 128 kB
Sending Internal Reconfiguration Request...
Waiting configuration Apply!
Restoring configuration...
EMMC ROM2/3 (Boot Partitions) Capacity: 512 kB
EMMC RPMB (Replay Protected Memory Block) Capacity: 128 kB
Wiping Card... Please do not touch it!
Please don't forget to repair extCSD from backup!
Done.
Running:SAMSUNG: MoviNAND Factory Reset...
Skip loading eMMC Addon Firmware
CMD Pullup Level:969 mV
CMD Active Level:3031 mV
Box IO Level:3300 mV
CLK Rate:70000 khz
Sending Smart Wipe Request...
Wiping Card... Please do not touch it!
Please don't forget to repair extCSD from backup!
Done.
Running:SAMSUNG: eMMC firmware update...
Confirmed eMMC Part Number: KLMAG2GE4A-A002
Z3X EasyJtag Software ver. 2.6.0.1
Loading eMMC Addon Firmware... IO: 3300 mV
Box S/N: 040170124137F9C6, ,FW Ver.: 01.60
CMD Pullup Level:1000 mV
CMD Active Level:2939 mV
Box IO Level:3300 mV
CLK Rate:70000 khz
Setup firmware update mode, wait 2..30 sec...
Success!
Sending eMMC firmware...
Success!
Verifying eMMC firmware...
Success!
Flashing eMMC firmware...
Success!
Repairing eMMC CID...
Success!
eMMC firmware is updated now!
Please reconnect all eMMC lines before next operation!
Please don't forget to repair extCSD from backup!
Please don't forget to configure BOOT sizes!
Done.
Compression is ON
Z3X EasyJtag Software ver. 2.6.0.1
Loading eMMC GEN1 Firmware... IO: 3300 mV
Box S/N: 040170124137F9C6, ,FW Ver.: 01.60
CMD Pullup Level:1000 mV
CMD Active Level:2928 mV
Box IO Level:3300 mV
CLK Rate:14000 khz
HiPower mode is ON!
---------- eMMC Device Information ----------
EMMC CID : 1501004D414732474105C8049C3A5F36
EMMC CSD : D02701320F5903FFF6DBFFFF8A404006
EMMC Manufacturer ID: 0015 , OEM ID: 0100
EMMC Date: 05/2012 Rev.0x5
EMMC NAME: MAG2GA , S/N: 3355745338
EMMC NAME (HEX): 4D414732474100
EMMC ROM1 (Main User Data) Capacity: 15028 MB
EMMC ROM2 (Boot Partition 1) Capacity: 2048 kB
EMMC ROM3 (Boot Partition 2) Capacity: 2048 kB
EMMC RPMB (Replay Protected Memory Block) Capacity: 128 kB
EMMC Permanent Write Protection: No
EMMC Temporary Write Protection: No
EMMC Password Locked: No
Extended CSD rev 1.5 (MMC 4.41)
Boot configuration [PARTITION_CONFIG: 0x00] No boot partition configured.
Boot bus config [177]: 0x00 , width 1bit , Partition config [179]: 0x00.
H/W reset function [RST_N_FUNCTION]: 0x00
High-capacity W protect group size [HC_WP_GRP_SIZE: 0x00000000]
Partitioning Support [PARTITIONING_SUPPORT]: 0x03
Device support partitioning feature
Device can have enhanced tech.
Partitioning Setting [PARTITION_SETTING_COMPLETED]: 0x00
---------------------------------------------
Backup saved: MAG2GA_3355745338_20170823_0637.extcsd
Done.
extCSD file...C:\Program Files\Z3X\EASYJTAG\Backups\MAG2GA_3355745338_20170823_0558.extcsd
Running:Repair extCSD...
Z3X EasyJtag Software ver. 2.6.0.1
Skip loading eMMC Addon Firmware
CMD Pullup Level:1000 mV
CMD Active Level:2928 mV
Box IO Level:3300 mV
CLK Rate:14000 khz
------------Parsing extCSD------------
=============================================
Extended CSD rev 1.5 (MMC 4.41)
=============================================
Card Supported Command sets [S_CMD_SET: 0x01]
HPI Features [HPI_FEATURE: 0x03]:
implementation based on CMD12
Background operations support [BKOPS_SUPPORT: 0x01]
Background operations status [BKOPS_STATUS: 0x00]
1st Initialisation Time after programmed sector [INI_TIMEOUT_AP: 0x1e]
Power class for 52MHz, DDR at 3.6V [PWR_CL_DDR_52_360: 0x00]
Power class for 52MHz, DDR at 1.95V [PWR_CL_DDR_52_195: 0x00]
Minimum Performance for 8bit at 52MHz in DDR mode:
[MIN_PERF_DDR_W_8_52: 0x00]
[MIN_PERF_DDR_R_8_52: 0x00]
TRIM Multiplier [TRIM_MULT: 0x02]
Secure Feature support [SEC_FEATURE_SUPPORT: 0x15]
Secure Erase Multiplier [SEC_ERASE_MULT: 0x1b]
Secure TRIM Multiplier [SEC_TRIM_MULT: 0x11]
Boot Information [BOOT_INFO: 0x07]
Device supports alternative boot method
Device supports dual data rate during boot
Device supports high speed timing during boot
Boot partition size [BOOT_SIZE_MULTI: 0x10]
Access size [ACC_SIZE: 0x07]
High-capacity erase unit size [HC_ERASE_GRP_SIZE: 0x01]
High-capacity erase timeout [ERASE_TIMEOUT_MULT: 0x01]
Reliable write sector count [REL_WR_SEC_C: 0x01]
High-capacity W protect group size [HC_WP_GRP_SIZE: 0x50]
Sleep current (VCC) [S_C_VCC: 0x07]
Sleep current (VCCQ) [S_C_VCCQ: 0x07]
Sleep/awake timeout [S_A_TIMEOUT: 0x11]
Sector Count [SEC_COUNT: 0x01d5a000]
Minimum Write Performance for 8bit:
[MIN_PERF_W_8_52: 0x00]
[MIN_PERF_R_8_52: 0x00]
[MIN_PERF_W_8_26_4_52: 0x00]
[MIN_PERF_R_8_26_4_52: 0x00]
Minimum Write Performance for 4bit:
[MIN_PERF_W_4_26: 0x00]
[MIN_PERF_R_4_26: 0x00]
Power classes registers:
[PWR_CL_26_360: 0x00]
[PWR_CL_52_360: 0x00]
[PWR_CL_26_195: 0x00]
[PWR_CL_52_195: 0x00]
Partition switching timing [PARTITION_SWITCH_TIME: 0x01]
Out-of-interrupt busy timing [OUT_OF_INTERRUPT_TIME: 0x02]
Card Type [CARD_TYPE: 0x07]
CSD structure version [CSD_STRUCTURE: 0x02]
Command set [CMD_SET: 0x00]
Command set revision [CMD_SET_REV: 0x00]
Power class [POWER_CLASS: 0x00]
High-speed interface timing [HS_TIMING: 0x00]
Erased memory content [ERASED_MEM_CONT: 0x00]
Boot configuration bytes [PARTITION_CONFIG: 0x00]
Not boot enabled
No access to boot partition
Boot config protection [BOOT_CONFIG_PROT: 0x00]
Boot bus Conditions [BOOT_BUS_CONDITIONS: 0x00]
High-density erase group definition [ERASE_GROUP_DEF: 0x00]
Boot write protection status registers [BOOT_WP_STATUS]: 0x00
Boot Area Write protection [BOOT_WP]: 0x00
Power ReadOnly locking: possible
Permanent ReadOnly locking: possible
Read Only lock status: not locked
User area write protection register [USER_WP]: 0x00
FW configuration [FW_CONFIG]: 0x00
RPMB Size [RPMB_SIZE_MULT]: 0x01
Write reliability setting register [WR_REL_SET]: 0x1f
Write reliability parameter register [WR_REL_PARAM]: 0x05
Enable background operations handshake [BKOPS_EN]: 0x00
H/W reset function [RST_N_FUNCTION]: 0x00
HPI management [HPI_MGMT]: 0x00
Partitioning Support [PARTITIONING_SUPPORT]: 0x03
Device support partitioning feature
Device can have enhanced tech.
Max Enhanced Area Size [MAX_ENH_SIZE_MULT]: 0x0000bb
Partitions attribute [PARTITIONS_ATTRIBUTE]: 0x00
Partitioning Setting [PARTITION_SETTING_COMPLETED]: 0x01
General Purpose Partition Size [GP_SIZE_MULT_4]: 0x000000
[GP_SIZE_MULT_3]: 0x000000
[GP_SIZE_MULT_2]: 0x000000
[GP_SIZE_MULT_1]: 0x000000
Enhanced User Data Area Size [ENH_SIZE_MULT]: 0x000000
Enhanced User Data Start Address [ENH_START_ADDR]: 0x000000
Bad Block Management mode [SEC_BAD_BLK_MGMNT]: 0x00
------------Done parsing------------
Writing as extCSD 4.41
Done.
Compression is ON
Z3X EasyJtag Software ver. 2.6.0.1
Loading eMMC GEN1 Firmware... IO: 3300 mV
Box S/N: 040170124137F9C6, ,FW Ver.: 01.60
CMD Pullup Level:1000 mV
CMD Active Level:2928 mV
Box IO Level:3300 mV
CLK Rate:14000 khz
HiPower mode is ON!
---------- eMMC Device Information ----------
EMMC CID : 1501004D414732474105C8049C3A5F36
EMMC CSD : D02701320F5903FFF6DBFFFF8A404006
EMMC Manufacturer ID: 0015 , OEM ID: 0100
EMMC Date: 05/2012 Rev.0x5
EMMC NAME: MAG2GA , S/N: 3355745338
EMMC NAME (HEX): 4D414732474100
EMMC ROM1 (Main User Data) Capacity: 15028 MB
EMMC ROM2 (Boot Partition 1) Capacity: 2048 kB
EMMC ROM3 (Boot Partition 2) Capacity: 2048 kB
EMMC RPMB (Replay Protected Memory Block) Capacity: 128 kB
EMMC Permanent Write Protection: No
EMMC Temporary Write Protection: No
EMMC Password Locked: No
Extended CSD rev 1.5 (MMC 4.41)
Boot configuration [PARTITION_CONFIG: 0x00] No boot partition configured.
Boot bus config [177]: 0x00 , width 1bit , Partition config [179]: 0x00.
H/W reset function [RST_N_FUNCTION]: 0x00
High-capacity W protect group size [HC_WP_GRP_SIZE: 0x00000000]
Partitioning Support [PARTITIONING_SUPPORT]: 0x03
Device support partitioning feature
Device can have enhanced tech.
Partitioning Setting [PARTITION_SETTING_COMPLETED]: 0x01
---------------------------------------------
Backup saved: MAG2GA_3355745338_20170823_0639.extcsd
Done.
eMMC_tool Suite ver. 1.4.8.0
Microsoft Windows 7 (64 bit) build 7601 (6.1.7600.16385)
Looking for EasyJTAG box...
EasyJTAG API ver. 2008
Setting IO Levels to 3.3V
Setting frequence to 21 Mhz
HiPower mode is OFF
EasyJTAG Box Serial = 040170124137F9C6
Card Serial = AA76-C170
EasyJTAG Box Firmware = 01.60
Changelog:
08.08.2017 (ver 1.4.8.0)
Fix: Bugs that have been found through your crash report
Fix: Saving VCF for contacts
Add: Multiple file selection for Samsung firmware
Add: Write full Extcsd or write only the boot configuration ("Repair Extcsd" button)
Add: Intel vendor (for easy read/write ROM2/ROM3/GP1)
Add: "Pinouts" tab (taken from the catalog of classic software)
Add: Checker for Sony TrimArea
Add: Speed graph for "Random verify emmc"
Add: Fat16/Fat32/exFat support (Explorer)
HiPower mode is OFF
Frequence: 21 Mhz
CMD Pullup Level: 990 mV
CMD Active Level: 2722 mV
EMMC Device Information :
EMMC CID: 1501004D414732474105C8049C3A5F36
EMMC CSD: D02701320F5903FFF6DBFFFF8A404006
EMMC Manufacture Name: SAMSUNG
EMMC NAME: MAG2GA , S/N: C8049C3A , rev. 05
EMMC NAME (HEX): 4D4147324741
EMMC ROM 1 (Main User Data) Capacity: 15028 MB (0003AB400000)
EMMC ROM 2/3 (Boot Partition 1/2) Capacity: 2048 KB (000000200000)
EMMC RPMB (Replay Protected Memory Block) Capacity: 128 KB (000000020000)
Extended CSD Information :
Extended CSD rev: 1.5 (MMC 4.41)
Backup saved: MAG2GA_C8049C3A_20170823_064148.extcsd
EMMC Init completed.
Get firmware version
Firmware info not found
HiPower mode is OFF
Frequence: 21 Mhz
CMD Pullup Level: 1010 mV
CMD Active Level: 2928 mV
EMMC Device Information :
EMMC CID: 1501004D414732474105C8049C3A5F36
EMMC CSD: D02701320F5903FFF6DBFFFF8A404006
EMMC Manufacture Name: SAMSUNG
EMMC NAME: MAG2GA , S/N: C8049C3A , rev. 05
EMMC NAME (HEX): 4D4147324741
EMMC ROM 1 (Main User Data) Capacity: 15028 MB (0003AB400000)
EMMC ROM 2/3 (Boot Partition 1/2) Capacity: 2048 KB (000000200000)
EMMC RPMB (Replay Protected Memory Block) Capacity: 128 KB (000000020000)
Extended CSD Information :
Extended CSD rev: 1.5 (MMC 4.41)
Backup saved: MAG2GA_C8049C3A_20170823_064331.extcsd
EMMC Init completed.
Operation: Erase all eMMC Regions at once
eMMC switching to ROM2
Erasing partition...
Done erasing partition.
eMMC switching to ROM3
Erasing partition...
Done erasing partition.
eMMC switching to ROM1
Erasing partition...
Done erasing partition.
HiPower mode is OFF
Frequence: 21 Mhz
CMD Pullup Level: 1000 mV
CMD Active Level: 2949 mV
EMMC Device Information :
EMMC CID: 1501004D414732474105C8049C3A5F36
EMMC CSD: D02701320F5903FFF6DBFFFF8A404006
EMMC Manufacture Name: SAMSUNG
EMMC NAME: MAG2GA , S/N: C8049C3A , rev. 05
EMMC NAME (HEX): 4D4147324741
EMMC ROM 1 (Main User Data) Capacity: 15028 MB (0003AB400000)
EMMC ROM 2/3 (Boot Partition 1/2) Capacity: 2048 KB (000000200000)
EMMC RPMB (Replay Protected Memory Block) Capacity: 128 KB (000000020000)
Extended CSD Information :
Extended CSD rev: 1.5 (MMC 4.41)
Backup saved: MAG2GA_C8049C3A_20170823_064856.extcsd
EMMC Init completed.
Operation: Write all eMMC Regions at once
Writing BootConfig ...
Reg: 179 Value: 0x00
Reg: 177 Value: 0x00
Reg: 162 Value: 0x00
Done
Writing to: ROM2 , start: 0x000000000000 , size: 0x000000200000
Filename: boot1.bin
eMMC switching to ROM2
Writing partition...
Done writing partition. Write speed: 499.63 Kb/s
Writing to: ROM3 , start: 0x000000000000 , size: 0x000000200000
Filename: boot2.bin
eMMC switching to ROM3
Writing partition...
Done writing partition. Write speed: 621.38 Kb/s
Writing to: ROM1 , start: 0x000000000000 , size: 0x0003AB400000
Filename: userarea.bin
eMMC switching to ROM1
Writing partition...
Done writing partition. Write speed: 1340.95 Kb/s
All done
HiPower mode is OFF
Frequence: 21 Mhz
CMD Pullup Level: 1000 mV
CMD Active Level: 2939 mV
EMMC Device Information :
EMMC CID: 1501004D414732474105C8049C3A5F36
EMMC CSD: D02701320F5903FFF6DBFFFF8A404006
EMMC Manufacture Name: SAMSUNG
EMMC NAME: MAG2GA , S/N: C8049C3A , rev. 05
EMMC NAME (HEX): 4D4147324741
EMMC ROM 1 (Main User Data) Capacity: 15028 MB (0003AB400000)
EMMC ROM 2/3 (Boot Partition 1/2) Capacity: 2048 KB (000000200000)
EMMC RPMB (Replay Protected Memory Block) Capacity: 128 KB (000000020000)
Extended CSD Information :
Extended CSD rev: 1.5 (MMC 4.41)
Backup saved: MAG2GA_C8049C3A_20170823_102307.extcsd
EMMC Init completed.
Get firmware version
Brand = samsung
Model = GT-P5100
Phone platform = omap4
CPU Abi = armeabi-v7a
Android release = 4.1.1
Firmware version = JRO03C.P5100XXCLL2
Firmware date = Wed Dec 12 19:10:59 KST 2012
FENIS NA=))
