PLDT AURA TELPAD MA7 FIRMWARE ROM RK3066
NOTE: Before Writing ROM to your device. Extract the downloaded compressed file and provide given password if asked
Do it at your own risk, After flashed the device is set automatic in reset condition, All your user data is lost. Make sure you full BACK-UP the device first before to proceed flashing your phone for future purposes..
PLDT AURA TELPAD MA7 Firmware Rom is Flash using CM2 Rockchip tool to the same model.
The figure image on the top picture shows the actual unit of PLDT AURA TELPAD.
This Telpad motherboard id: MA7 V15 20150113 was revived from hang on start-up problem.
After completely flash using said tool continue to read below about what is ROM about
The firmware RK3066__RK30SDK__rk3188__eng.20150923.180554.irkfw
was already flash using CM2 tools using write firmware button.
Here some Logs may viewers will need to understand what ROM about
Connect device to PC!
Hold 'VolUp'+'VolDown' or 'VolUp', insert USB cable, press 'PowerOn'!
Found active FlashInterface , connecting ...
Detected : RK3066
Read Info Ok!
Selected : RK3066__RK30SDK__rk3188__eng.20150923.180554.irkfw
FastVerify : Ok , 0x323C5159
FwInfoBlk : 0x0009
Load Ok!
Operation : Flash [ v1.0 ]
INFRK Image : RK3066__RK30SDK__rk3188__eng.20150923.180554.irkfw
Will flash INFRK image now...
Update PMT ...
Prepare ...
Update ...
Update Ok!
Flashing now : MISC
Prepare ...
Writing ...
Flash Ok!
Flashing now : KERNEL
Prepare ...
Writing ...
Flash Ok!
Flashing now : BOOT
Prepare ...
Writing ...
Flash Ok!
Flashing now : RECOVERY
Prepare ...
Writing ...
Flash Ok!
Flashing now : BACKUP
Prepare ...
Writing ...
Flash Ok!
Flashing now : CACHE
Prepare ...
Writing ...
Flash Ok!
Flashing now : USERDATA
Prepare ...
Writing ...
Flash Ok!
Flashing now : ANDROID
Writing ...
Flash Ok!
UIMG write finished sucessfully, resul : 0x09
Elapsed: 00:01:58
After flashed, The tablet automatic to reboot to recovery and comes to factory reset instantly itself
User must wait to reboot to normal and wait for optimizing apps until welcome menu appear
and the tablet is ready to use again.
Driver
https://doc-0o-58-docs.googleuserco...281/*/0B3U65CmdIe5caWJLeWJaWFB6Y3M?e=download
Note: The ROM is split into 3 files, Download this 3 files below and place in one folder and extract using WinRAR.
Rom1
https://mega.nz/#!u0QwRbqK!U7sbcstHa-fET8EGllf23HOTZ9B84JlhcDnvzN1lm_A
Rom2
https://mega.nz/#!D0JT2bhC!CssbGMW70EtAdVWFARco7qgqMbHBPYlUDoVU4oN6uYQ
Rom3
https://mega.nz/#!W1QnVJpC!61Rlfw5NXxV4Q6F5xj5jNbE6Dcu5-qOUEurAVn1Or48
password: emerlitsgsmservice
Enjoy Raaj free firmware
NOTE: Before Writing ROM to your device. Extract the downloaded compressed file and provide given password if asked
Do it at your own risk, After flashed the device is set automatic in reset condition, All your user data is lost. Make sure you full BACK-UP the device first before to proceed flashing your phone for future purposes..
PLDT AURA TELPAD MA7 Firmware Rom is Flash using CM2 Rockchip tool to the same model.
The figure image on the top picture shows the actual unit of PLDT AURA TELPAD.
This Telpad motherboard id: MA7 V15 20150113 was revived from hang on start-up problem.
After completely flash using said tool continue to read below about what is ROM about
The firmware RK3066__RK30SDK__rk3188__eng.20150923.180554.irkfw
was already flash using CM2 tools using write firmware button.
Here some Logs may viewers will need to understand what ROM about
Connect device to PC!
Hold 'VolUp'+'VolDown' or 'VolUp', insert USB cable, press 'PowerOn'!
Found active FlashInterface , connecting ...
Detected : RK3066
Read Info Ok!
Selected : RK3066__RK30SDK__rk3188__eng.20150923.180554.irkfw
FastVerify : Ok , 0x323C5159
FwInfoBlk : 0x0009
Load Ok!
Operation : Flash [ v1.0 ]
INFRK Image : RK3066__RK30SDK__rk3188__eng.20150923.180554.irkfw
Will flash INFRK image now...
Update PMT ...
Prepare ...
Update ...
Update Ok!
Flashing now : MISC
Prepare ...
Writing ...
Flash Ok!
Flashing now : KERNEL
Prepare ...
Writing ...
Flash Ok!
Flashing now : BOOT
Prepare ...
Writing ...
Flash Ok!
Flashing now : RECOVERY
Prepare ...
Writing ...
Flash Ok!
Flashing now : BACKUP
Prepare ...
Writing ...
Flash Ok!
Flashing now : CACHE
Prepare ...
Writing ...
Flash Ok!
Flashing now : USERDATA
Prepare ...
Writing ...
Flash Ok!
Flashing now : ANDROID
Writing ...
Flash Ok!
UIMG write finished sucessfully, resul : 0x09
Elapsed: 00:01:58
After flashed, The tablet automatic to reboot to recovery and comes to factory reset instantly itself
User must wait to reboot to normal and wait for optimizing apps until welcome menu appear
and the tablet is ready to use again.
Driver
https://doc-0o-58-docs.googleuserco...281/*/0B3U65CmdIe5caWJLeWJaWFB6Y3M?e=download
Note: The ROM is split into 3 files, Download this 3 files below and place in one folder and extract using WinRAR.
Rom1
https://mega.nz/#!u0QwRbqK!U7sbcstHa-fET8EGllf23HOTZ9B84JlhcDnvzN1lm_A
Rom2
https://mega.nz/#!D0JT2bhC!CssbGMW70EtAdVWFARco7qgqMbHBPYlUDoVU4oN6uYQ
Rom3
https://mega.nz/#!W1QnVJpC!61Rlfw5NXxV4Q6F5xj5jNbE6Dcu5-qOUEurAVn1Or48
password: emerlitsgsmservice
Enjoy Raaj free firmware