Repair Samsung SGH-M310 Hang On Logo Using Z3X

[PhoneWar]

Repair Samsung SGH-M310 Hang On Logo Using Z3X


Symptoms :

1. Phone Hang On Startup Logo

Tools & Materials :

1. Z3X Box with Samsung Module Activated
2. E2120 Z3X RJ45 Cable

Step By Step :

1. Open Samsung 2G Tool
2. Pick Samsung M310 model
3. Pick Z3X Com Port Properly
4. Check & Insert Imei Number on Imei box
5. Insert S3 File
6. Insert CTS / CSC File
7. Click †Firmware †on Write area
8. Connect Phone to Cable ( with Battery & press on/off if needed )
9. Wait untill procees done

here’s the log operations :

Selected model: M310
Selected com port: COM34
Selected speed port: 921600
Decode *.s3 file – please wait
segments 9
segment 1 20000000 100 byte
segment 2 20300000 17664092 byte
segment 3 2001E000 144 byte
segment 4 20016000 4652 byte
segment 5 20078000 1093164 byte
segment 6 2000C000 20128 byte
segment 7 20058000 56 byte
segment 8 20058138 17404 byte
segment 9 2003803C 36688 byte
Phone must be OFF with battery
Please, connect phone and press shortly power button
Syncing phone… OK
Sending loader 1… OK
Syncing phone… OK
Sending loader 2… OK
Syncing phone… OK
Syncing phone… OK
Flash ID: 010000427E22
Syncing phone… OK
Sending *.s3 file… OK
Sending *.cts or *.csc file…
Detected file – > 8
Format FFS – wait… OK
Send content – wait… OK
Elapsed time: 496 second, sw ver: 3.4.0071