- Joined
- Mar 11, 2015
- Messages
- 604
- Reaction score
- 15
- Points
- 81
My recent experiment in flashing the Chinese firmware for my Lenovo Tab A7-30 to the European version resulted in an error in the IMEI or International Mobile Station Equipment Identity; a 15 digit number that is unique to the device.
Every time I input *#06# is brings the message INVALID IMEI and without a valid IMEI, your device will not be able to make calls, send text messages and other simple communication over the network.
Now, to be honest, this is a side effect of flashing I did not consider. Fortunately, restoring the number is not that difficult and thanks to instructions from Plus Droid (www.plusdroid.com) I restored mine.
For my device, the IMEI number was printed on the box so it was relatively easy to restore it.
The first thing is to open the device in engineering mode. This is done with the following code *#*#3646633#*#*
Get into Engineer mode by using *#*#3646633#*#*
Then swipe to Connectivity and tap CDS Information, then tap on Radio Information. Then tap on Phone 1.
In CDS, tap on Radio Information
Tap on Phone 1
Then enter AT+ EGMR=1,7,IMEI number and press SEND AT COMMAND. Make sure there is a space between AT+ and EGMR otherwise you will get an error.
Enter the command
Once the command is sent, reboot your device and then check the IMEI number again by using *#06#.

Every time I input *#06# is brings the message INVALID IMEI and without a valid IMEI, your device will not be able to make calls, send text messages and other simple communication over the network.
Now, to be honest, this is a side effect of flashing I did not consider. Fortunately, restoring the number is not that difficult and thanks to instructions from Plus Droid (www.plusdroid.com) I restored mine.
For my device, the IMEI number was printed on the box so it was relatively easy to restore it.
The first thing is to open the device in engineering mode. This is done with the following code *#*#3646633#*#*
Get into Engineer mode by using *#*#3646633#*#*Then swipe to Connectivity and tap CDS Information, then tap on Radio Information. Then tap on Phone 1.
In CDS, tap on Radio Information
Tap on Phone 1Then enter AT+ EGMR=1,7,IMEI number and press SEND AT COMMAND. Make sure there is a space between AT+ and EGMR otherwise you will get an error.
Enter the commandOnce the command is sent, reboot your device and then check the IMEI number again by using *#06#.
