REFERENCE Rm-17 n95 dead rivive by infinity box

[AltF4]

Rm-17 n95 dead rivive by infinity box

HERE THE FLASH FILE USE
CM_Nokia-N95_KONGLI26_06B_PCB01_GPRS_MT6226_S01[1].MAUI_06B_W07_04_MP_V32_16m_En_Fr_Ar.B0M.bin


COM20 [VCP0] selected
Device: Autodetect 6205-6227 NOR
Checking data, wait...
advanced flash detection enabled
Action: write NOR flash
"smart write" active
write: Firmware
skip: Customization/Language Pack
skip: Customization
skip: Eeprom/ffs
Boot...
Press and HOLD Power button now !
19200 fixed
Connecting, wait...
Initializing[6226:8A02:8A01]...
CPU: MT6226
high speed boot disabled
chip: 0031:1641:85B8
high speed disabled
boot step size: 0002
Release Power button now !
Boot Done
Initialize...
detecting chip #00 in region #00...
flash: EC257E25082501:2CEA0000000000
flash: Samsung AMD/Fujitsu std [D 0008x002000 00FEx010000 0008x002000] 16Mb
detecting chip #01 in region #00...
flash: EC257E25082501:2CEA0000000000
flash: Samsung AMD/Fujitsu std [D 0008x002000 00FEx010000 0008x002000] 16Mb
number of flash chip/regions detected: 02/01
Initialize Done
Set baud...
115200
Set baud Done
Initialize bootcode...
Initialize bootcode Done
Check firmware integrity...
detect device identification#1...
detection phase #1...
detect device identification#1 finished
identification#1 structure: 2nd [enhanced] generation
security area#1 is Ok
security area#1 backup saved: C:\Program Files\InfinityBox\ChineseMiracle\backup_security\i d.95FABBBA.[KONGLI26_06B_PCB01_GPRS_MT6226_S01.MAUI_06B_W07_04 _MP_V32.BIN_2CDDE8C5].rpl
identification#1 detection finished
device-id: 95FABBBA
identification#1 protocol ver: 04
ver. sw1: KONGLI26_06B_PCB01_GPRS_MT6226_S01.MAUI_06B_W07_04 _MP_V32.BIN
ver. sw2: MAUI.06B.W07.04.MP.V32, 3A1722D3
ffs offset/size: 00E00000/00200000
detect device identification#2...
detection phase #1...
.
warning: optional information is not found,
if phone works well just ignore this warning
detect device identification#2 finished
Check firmware integrity Done
Check firmware content...
Check firmware content Done
Backup required data...
Backup required data Done
Patch required data...
Patch required data Done
Special operation...
Special operation Done
Write...
detect device identification#2...
detection phase #1...
.
warning: optional information is not found,
if phone works well just ignore this warning
detect device identification#2 finished
security area#1 calculation...
done
file saved: C:\Program Files\InfinityBox\ChineseMiracle\backup_security\s ystem_log_95FABBBA_KONGLI26_06B_PCB01_GPRS_MT6226_ S01.MAUI_06B_W07_04_MP_V32.BIN_2CDDE8C5_20080920-171531.B0X.bin
Area: Firmware
flash: EC257E25082501:2CEA0000000000
Write: Firmware
detect device identification#2...
detection phase #1...
.
warning: optional information is not found,
if phone works well just ignore this warning
detect device identification#2 finished
Write Done
Finalization...
Finalization Done
file saved: C:\Program Files\InfinityBox\ChineseMiracle\backup_security\s ystem_log_95FABBBA_KONGLI26_06B_PCB01_GPRS_MT6226_ S01.MAUI_06B_W07_04_MP_V32.BIN_2CDDE8C5_20080920-173925.B0X.bin
Finished, time used: 1516 sec
Remove/Install battery now !