- Joined
- Feb 21, 2016
- Messages
- 126
- Reaction score
- 3
- Points
- 1
Before move to the next step please make good preparations first.
*Device powered on
*At least 50% battery level
*Make sure the Internet is connected
*You have to connect your device to the computer so a USB cable (the original one suggested) is needed.
It is better to make a full backup in case something went wrong.
After all these preparations are made you can move to the rooting process.
Download KingoRoot Android (PC Version) on your computer. https://www.kingoapp.com/android-root/download.htm
After installation completes double click Kingo Android Root to launch it.
After launching you will get a prompt asking you to connect your device to your computer via USB cable.
Connect your device to computer via USB cable.
There should be a device driver on your computer to recognize your device. If there is none Kingo will install one for you automatically. Just follow the instructions and install driver on your computer.
Enable USB Debugging on your Android
Only with the USB Debugging enabled the computer can recognize your device. If the computer can not recognize your device please check if the USB Debugging is enabled.
Pay attention to the prompt window, select "Always allow from this computer", otherwise you will leave yourself an OFFLINE DEVICE.
After connection the basic information of your device will appear
KingoRoot will detect the basic information of your device and you can click root after you know clearly about rooting and what consequences rooting may cause.
Wait a few minutes till the rooting process completes.
Kingo Android Root has employed multiple exploits on your device so it will take a few minutes to finish the rooting process. During the rooting process do not perform any operation on it.
Result: Root succeed or fail.
Hope your device can be rooted successfully by Kingo. After successful rooting the device will reboot itself please do not be panic and do not operate, either.
Normally, there will be an app named "SuperUser" installed on your device after rooting successfully.
*Device powered on
*At least 50% battery level
*Make sure the Internet is connected
*You have to connect your device to the computer so a USB cable (the original one suggested) is needed.
It is better to make a full backup in case something went wrong.
After all these preparations are made you can move to the rooting process.
Download KingoRoot Android (PC Version) on your computer. https://www.kingoapp.com/android-root/download.htm
After installation completes double click Kingo Android Root to launch it.
After launching you will get a prompt asking you to connect your device to your computer via USB cable.
Connect your device to computer via USB cable.
There should be a device driver on your computer to recognize your device. If there is none Kingo will install one for you automatically. Just follow the instructions and install driver on your computer.
Enable USB Debugging on your Android
Only with the USB Debugging enabled the computer can recognize your device. If the computer can not recognize your device please check if the USB Debugging is enabled.
Pay attention to the prompt window, select "Always allow from this computer", otherwise you will leave yourself an OFFLINE DEVICE.
After connection the basic information of your device will appear
KingoRoot will detect the basic information of your device and you can click root after you know clearly about rooting and what consequences rooting may cause.
Wait a few minutes till the rooting process completes.
Kingo Android Root has employed multiple exploits on your device so it will take a few minutes to finish the rooting process. During the rooting process do not perform any operation on it.
Result: Root succeed or fail.
Hope your device can be rooted successfully by Kingo. After successful rooting the device will reboot itself please do not be panic and do not operate, either.
Normally, there will be an app named "SuperUser" installed on your device after rooting successfully.