S3850 corby 2 Deadboot Solve via Riff Box [Reference]

[solenn]

S3850 corby 2 Deadboot Solve via Riff Box ​

Open serial port...OK

Connecting to the RIFF Box...OK
Firmware Version: 1.37, JTAG Manager Version: 1.55
Selected Resurrector: [Samsung S3850 V1.00]​

Connecting to the dead body...OK
Detected dead body ID: 0x07926F0F - CORRECT!
Set I/O Voltage reads as 3.00V, TCK Frequency is RTCK
Adaptive Clocking RTCK Sampling is: [Sample at MAX]​

Resurrection sequence started.
Establish communication with the phone...OK
Initializing internal hardware configuration...OK
Uploading resurrector data into memory...OK
Starting communication with resurrector...OK​

Detected an Initialized FLASH1 Chip, ID: 0x00EC/0x0040 (256MB)
Selected Resurrection Data for the NAND Chip with Page size = 2KB​

Flashing the dead body...OK
Resurrection complete!​

Yun owwh Ready to flash​

Welcome to Octoplus/Octopus Box Samsung software version 1.7.5

Selected firmware file: S3850XXKC2_OXAKC4.oct
Please put the phone into Download Mode and connect USB cable.
To put GT-S3850 into Download Mode, You have to perform the
following steps:
1. Reconnect the battery.
2. Press and hold "Volume UP" + "Call" + "Power" keys.
Searching for a phone. Please wait...
Found phone on COM50
Firmware write started.
Boot section skipped
Writing APPS section...
APPS section has been written successfully.
Writing RSRC1 section...
RSRC1 section has been written successfully.
Writing RSRC2 section...
RSRC2 section has been written successfully.
Writing FactoryFS section...
Formating FactoryFS partition...
Formating successfully compleated
FactoryFS section has been written successfully.
Writing CSC section...
CSC section has been written successfully.
Writing SHPAPP section...
SHPAPP section has been written successfully.
Phone will restart now
Firmware writing successfully completed.​

​