Model: S5830 Samsung
Problem: Blue Screen, Connect to PC not Detect.
Solution: Riff JTAG (solder all needed pin)
Procedure:
* Jtag cable to S5830 pcb board.
* Connect USB cable to unit .
* Connect battery or Power supply to unit..
* Make sure S5830 is selected in the list of models..
* Click resurrect Button..
* Wait till software is Done..
* Disconnect usb cable and de-solder jtag wires
After Boot repair flash Odin
Smile..
Problem: Blue Screen, Connect to PC not Detect.
Solution: Riff JTAG (solder all needed pin)
Procedure:
* Jtag cable to S5830 pcb board.
* Connect USB cable to unit .
* Connect battery or Power supply to unit..
* Make sure S5830 is selected in the list of models..
* Click resurrect Button..
* Wait till software is Done..
* Disconnect usb cable and de-solder jtag wires




After Boot repair flash Odin

Smile..
