this is for refference only
)
status of phone;
hang sa logo=((
need to fullflash....try ko kasi hard reset no luck...=((
procedure ;
open z3x ......
select right model of the phone...
loadflashfile...
press vol up, vol down and then power button for download to flash the phone...
connect usb to laptop and then to phone....
click firmware....
wait until finish flashing....
LOGS:
FINISH PRODUCT:
natapos din ang palabas:-*
)status of phone;
hang sa logo=((
need to fullflash....try ko kasi hard reset no luck...=((
procedure ;
open z3x ......
select right model of the phone...
loadflashfile...
press vol up, vol down and then power button for download to flash the phone...
connect usb to laptop and then to phone....
click firmware....
wait until finish flashing....
LOGS:
Code:
Selected model: S5830I
Selected port: COM3 Z3X BOX Serial Port
Selected port speed: 115200
File analysis... OK
Total file size: 0x0D75F250
Searching USB Flash Interface... detected COM7
Setup connection... OK
Reading PIT from phone... OK
Saved to C:\Program Files\Z3X\Samsung\SamsungTool\Pit\S5830I_25-8-2014_11-51-10.pit
Sending BcmBoot.img... OK
Sending HEDGE_NVRAM8_RF_LE.bin... OK
Sending sysparm_dep.img... OK
Sending sbl.bin... OK
Sending boot.img... OK
Sending system.img... OK
Sending userdata.img... OK
Sending param.lfs... OK
Sending BcmCP.img... OK
Sending csc.rfs... OK
Flashing done (time - 00:00:49)
Done with Samsung Tool v.17.2
Done with Samsung Tool v.17.2FINISH PRODUCT:
natapos din ang palabas:-*
