SAGEM my220v unlock by inifinity

[BLIND]

SAGEM my220v unlock by inifinity

references:

pin out
[1............16]

TX:9(pin 3 rj45)
Rx:10(pin 2 rj45)
Gnd:16(pin7&8rj45)

logs:


COM30 [VCP0] selected
Device: Sagem-my220v
Checking data, wait...
Action: unlock
unlock method-1
Boot...
Press and HOLD Power button now (if boot does not start remove/install batery) !
loading...
middle part...
next part...
boot answer: 01
Release Power button now
Boot Done
Set Baud...
115200
Set Baud Done
Connecting...
flash: 0001:011A
Connecting Done
Check hardware...
flash chip supported
sw version: EBI_IO_141107_1557 141107_1557 EBI_IO Thhmm Dddmmmyyyy 01234567
Check hardware Done
Check parameters...
Check parameters Done
backup critical area...
reading [eeprom-sta]...
file saved: C:\Program Files\InfinityBox\Pana01\backup_Sagem-my220v_eeprom-sta_20080509-192311.B1E.bin
loading data...
data loaded
reading [eeprom-sec]...
file saved: C:\Program Files\InfinityBox\Pana01\backup_Sagem-my220v_eeprom-sec_20080509-192315.B1E.bin
reading [eeprom-complete]...
file saved: C:\Program Files\InfinityBox\Pana01\backup_Sagem-my220v_eeprom-complete_20080509-192321.B1E.bin
reading additional data...
done
backup critical area Done
Check memory...
current status: 0
Check memory Done
Write...
Erasing: lock-area
Writing: lock-area
Write Done
Finished, Remove/Install battery now !
Time used: 84 sec

Unlock instruction:
1. Power-On phone
2. Enter code: 12345678​