Samsung Anycall SCH-W390, UNLOCKED DONE BY OCTOPUS.
Model: Samsung Anycall SCH-W390
Problem: Network lock...Need to unlock
Procedure:
- Open samsung anycall tools -
- Select correct model -
- Select port -
- Click connect port -
- Click connect phone -
- Click direct unlock -
Ito picture:
ito log:
Welcome to Octopus Box Samsung software version 1.7.6
-----------------------------------------------------------------------------------
To connect SC-01C phone you have to perform the following steps:
1. Disconnect USB cable from phone.
2. Go to Menu->Settings->Applications->Development.
3. Turn on "USB Debugging" option.
4. When the message appears press "Yes".
5. Connect USB cable to the phone.
6. Press "Read Info" in Octopus Samsung software.
-----------------------------------------------------------------------------------
Platform: Samsung Anycall
Selected port: COM65
Selected model: SCH-W390
Mode: Normal
Phone model: SCH-W390
Firmware compiled date: Nov 27 2007
Firmware compiled time: 06:00:00
Firmware released date: Jan 14 2008
Firmware released time: 19:06:53
Phone IMEI: 351824-02-108765-3
Bluetooth MAC: 00:1F:CC:57:8C:54
User code is set up. Code: 0000
SW Version: M6260A-KYRZ-2.1.302430
-----------------------------------------------------------------------------------
Platform: Samsung Anycall
Selected port: COM65
Selected model: SCH-W390
Mode: Normal
Phone model: SCH-W390
Firmware compiled date: Nov 27 2007
Firmware compiled time: 06:00:00
Firmware released date: Jan 14 2008
Firmware released time: 19:06:53
Phone IMEI: 351824-02-108765-3
Bluetooth MAC: 00:1F:CC:57:8C:54
User code is set up. Code: 0000
SW Version: M6260A-KYRZ-2.1.302430
Creating NVM backup
Reading NVM done!
Unlocking phone...
Switching to emergency mode...
No diagnostic ports found!
Connecting to phone on COM65
Detected phone model: SCH-W390
Mode: Emergency
Detecting firmware type
Searching for signatures...
Reading NAND...
Writing NAND
Phone is successfully unlocked
Model: Samsung Anycall SCH-W390
Problem: Network lock...Need to unlock
Procedure:
- Open samsung anycall tools -
- Select correct model -
- Select port -
- Click connect port -
- Click connect phone -
- Click direct unlock -
Ito picture:
ito log:
Welcome to Octopus Box Samsung software version 1.7.6
-----------------------------------------------------------------------------------
To connect SC-01C phone you have to perform the following steps:
1. Disconnect USB cable from phone.
2. Go to Menu->Settings->Applications->Development.
3. Turn on "USB Debugging" option.
4. When the message appears press "Yes".
5. Connect USB cable to the phone.
6. Press "Read Info" in Octopus Samsung software.
-----------------------------------------------------------------------------------
Platform: Samsung Anycall
Selected port: COM65
Selected model: SCH-W390
Mode: Normal
Phone model: SCH-W390
Firmware compiled date: Nov 27 2007
Firmware compiled time: 06:00:00
Firmware released date: Jan 14 2008
Firmware released time: 19:06:53
Phone IMEI: 351824-02-108765-3
Bluetooth MAC: 00:1F:CC:57:8C:54
User code is set up. Code: 0000
SW Version: M6260A-KYRZ-2.1.302430
-----------------------------------------------------------------------------------
Platform: Samsung Anycall
Selected port: COM65
Selected model: SCH-W390
Mode: Normal
Phone model: SCH-W390
Firmware compiled date: Nov 27 2007
Firmware compiled time: 06:00:00
Firmware released date: Jan 14 2008
Firmware released time: 19:06:53
Phone IMEI: 351824-02-108765-3
Bluetooth MAC: 00:1F:CC:57:8C:54
User code is set up. Code: 0000
SW Version: M6260A-KYRZ-2.1.302430
Creating NVM backup
Reading NVM done!
Unlocking phone...
Switching to emergency mode...
No diagnostic ports found!
Connecting to phone on COM65
Detected phone model: SCH-W390
Mode: Emergency
Detecting firmware type
Searching for signatures...
Reading NAND...
Writing NAND
Phone is successfully unlocked