Share ko lng to sa inyo sa mga hindi pa naka encounter.
Samsung Anycall SCH-W570 na pahirapan e unlock dahil naka PHONE LOCK CODE sya..hindi ma detect ang Com port nya dahil sa LOCK CODE.
Sinubukan kona rin na e reprogram nlang para ma tanggal ang Phone Code kaso error parin..
kaya ito ang ginawa ko follow the procedure below step by step.
Unit: Samsung Anycall SCH-W570
Tools: OctopusBox Samsung Activated and Cable KHC4500
Problem: Phone Lock Code and Network Lock.
Procedure:
1.Open latest version of Octopus Samsung tool v1.1.8 and connect Phone to Laptop/install the diver if needed.
2.select Model and choose the right Com port.
3.click Read Info.
Note: Kung ayaw mag detect ang phone or maka encounter kayo ng mga error na kagaya nyang nasa baba.
port is busy
Firmware writing failed on block #0.
Firmware version for this phone is not supported
Nand reading process failed
Kung nakaranas kayo ng ganyan baka dahil sa PHONE CODE yan kaya hindi ma detect ang phone kaya ito ang gawin nyo proceed to step three.
Samsung Anycall SCH-W570 na pahirapan e unlock dahil naka PHONE LOCK CODE sya..hindi ma detect ang Com port nya dahil sa LOCK CODE.
Sinubukan kona rin na e reprogram nlang para ma tanggal ang Phone Code kaso error parin..
kaya ito ang ginawa ko follow the procedure below step by step.
Unit: Samsung Anycall SCH-W570
Tools: OctopusBox Samsung Activated and Cable KHC4500
Problem: Phone Lock Code and Network Lock.
Procedure:
1.Open latest version of Octopus Samsung tool v1.1.8 and connect Phone to Laptop/install the diver if needed.
2.select Model and choose the right Com port.
3.click Read Info.
Note: Kung ayaw mag detect ang phone or maka encounter kayo ng mga error na kagaya nyang nasa baba.
port is busy
Firmware writing failed on block #0.
Firmware version for this phone is not supported
Nand reading process failed
Kung nakaranas kayo ng ganyan baka dahil sa PHONE CODE yan kaya hindi ma detect ang phone kaya ito ang gawin nyo proceed to step three.
3.You need to put the phone into Emergency mode and connect cable,click Read user code.
FAQ: How to put the phone into Emergency mode?
Ans: To put the phone into Emergency mode please reconnect the battery,press and hold "4"+"Power On" keys.
4.after you read the code disconnect phone from PC and type mo yung code at reset mo ng manual pwede mo ring click ang factory reset. ang sa akin ay hand reset for safe.
5.Now you can Unlock you phone now.
4.after you read the code disconnect phone from PC and type mo yung code at reset mo ng manual pwede mo ring click ang factory reset. ang sa akin ay hand reset for safe.
5.Now you can Unlock you phone now.
6.Your phone is successfully
unlocked
.
unlocked
.
Code:
Platform: Samsung Anycall
Selected port: COM64
Selected model: SCH-W570
Detected phone model: SCH-W570
Mode: Emergency
Searching for user code. Please wait, it can take some time...
Found one possible user code: 1472
-----------------------------------------------------------------------------------
Platform: Samsung Anycall
Selected port: COM64
Selected model: SCH-W570
Mode: Normal
Phone model: SCH-W570
Firmware compiled date: Feb 20 2008
Firmware compiled time: 11:00:00
Firmware released date: Oct 07 2008
Firmware released time: 19:56:00
Phone IMEI: 352219-02-132784-6
Bluetooth MAC: 00:23:3A:2A:AD:9B
User code is set up. Code: 1472
Security checking...
Security checking completed successfully
Creating NVM backup
Reading NVM done!
Unlocking phone...
Switching to emergency mode...
No diagnostic ports found!
Connecting to phone on COM64
Detected phone model: SCH-W570
Mode: Emergency
Detecting firmware type
Searching for signatures...
Reading NAND...
Writing NAND
Phone is successfully unlocked